System Build 6533335COM User manual

6533335COM
Hobby Desk
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B346533335COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
Press CAM BOLT into hole.
Press parts together so CAM BOLT inserts
into edge hole.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
Press CAM LOCK into hole.
End hole
Arrow to point towards end
hole in edge of part.

4
systembuild.com
Before You Start
Quick
Tip
Assembly
Tube
You
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.

5
systembuild.com
Board Identification
Not actual size
Tube
You
Large Left Panel
38757335010 Large Right Panel
38757335020
Partition
38757335030 Top
38757335040
Large Bottom
38757335050
Left Adjustable Shelf
38757335060
Desktop
38757335130
ABCD
EFGH
Right Adjustable Shelf
38757335070
Small Left Panel
38757335080
Small Right Panel
38757335090
Back
38757335100 Small Bottom
38757335110 Adjustable Shelf
38757335120
Desktop Rail (x2)
38757335140 Support Rail (x2)
38757335150
I
JKL
MO
N

6
systembuild.com
Board Identification
Not actual size
Tube
You
C
F
H
DB
A
G
E
Large Door
36533335160 Small Door (x2)
36533335170
PQ
R
I
J
K
L
M
N
P
Q
Q
Back Panel
K875733500
RO
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.

7
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
(x14)
#A22710
cam bolt
(x14)
#A22700
cam lock
(x14)
#A21670
wood dowel
(x10)
#A23030
confirmat screw
(x3)
#A11170
5/8" screw
(x16)
#A12420
5/8" screw
(x8)
#A12930
1-1/8" screw
(x32)
#A21110
nail
(x8)
#A44140
foot
123
4
14
(x6)
#A17400
7/8" bolt
(x8)
#A22760
quickloc
(x12)
#A80250
shelf support
6
5
11
(x6)
#A65616
hinge
13
15 16
(x3)
#A52680
handle
(x3)
#A89020
bumper
10
(x6)
#A12950
1-1/8" screw
9
7
12
8
NOTICE!
Screws #7 and #12 are different
diameters.
The threaded body of screw #7 is
larger than body of screw #12.

8
systembuild.com
STEP1
Tube
You
2
2
(x2)
A
2

9
systembuild.com
STEP2
Tube
You
2
(x2) (x3)
2
2
B
N
9
9
9
9

10
systembuild.com
STEP3
Tube
You
13
(x2)
(x2)
Proper orientation of CAM LOCK
Tip
Assembly
Quick
C
1
3
3
9
(x3)
N
9
9
9

11
systembuild.com
STEP4
Tube
You
13
1
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2) (x4)
3
2
2
(x4)
1
3
3
1
1
2
D

12
systembuild.com
STEP5
Tube
You
D
A
B
UNLOCKLOCK
finished edges face up

13
systembuild.com
STEP6
Tube
You
A
D
C
B
UNLOCKLOCK
finished edges face up

14
systembuild.com
STEP7
Tube
You
D
finished edges face up
A
C
B
E
4
4
(x6)
4
4
4
4
4
10 12
(x1)
(x1)
E
finished surface
1st
2nd
12
10
Be sure to use screw #12 for
this step and not screw #7.

15
systembuild.com
STEP8
Tube
You
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn your unit on its front side.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that our unit is square.
Distance from corner to corner
must be equal as shown. Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
13
(x32)
R
13
E
B
raw
surface

16
systembuild.com
STEP9
Tube
You
14
78
(x4)
(x8) (x4)
14
14
7
7
8
E
Be sure to use screw #7 for
this step and not screw #12.

17
systembuild.com
STEP10
Tube
You
123
1
2
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2) (x2) (x2)
2
1
3
H

18
systembuild.com
STEP11
Tube
You
123
(x2) (x2) (x2)
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
1
3
2
1
3
I

19
systembuild.com
STEP12
Tube
You
3
15
5
3
1
(x2)(x4)
(x4)
1
1
1
3
3
J
3

20
systembuild.com
STEP13
Tube
You
H
J
I
UNLOCKLOCK