System Build 7973337COM User manual

7973337COM
Microwave Stand
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B347973337COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
P
Press CAM BOLT into hole.
Press parts together so CAM BOLT inserts
into edge hole.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes and
fastening parts together.
Press CAM LOCK into hole.
End hole
Arrow to point towards end
hole in edge of part.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.

4
systembuild.com
Before You Start
Quick
Tip
Assembly
Tube
You
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.
wood dowel

5
systembuild.com
Board Identification
Not actual size
Tube
You
Left Panel
37973337010
Right Panel
37973337020 Top
37973337040 Bottom 37973337050
Fixed Shelf
37973337060
ABC
F
D
G
E
H
I
JK
Partition
37973337030
Left Adjustable Shelf
37973337070 Right Adjustable Shelf 37973337080 Tall Door
37973337090
Left Door
37973337100 Right Door 37973337110 Left Back Panel
37973337120 Right Back Panel
37973337130
LM

6
systembuild.com
Board Identification
Not actual size
Tube
You
A
B
C
D
E
F
GH
I
J
K
G
L
M

7
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
(x10)
#A22700
cam lock
(x10)
#A22710
cam bolt
(x13)
#A21670
wood dowel
(x6)
#A23030
confirmat
(x12)
#A80250
shelf support
(x6)
#A17400
7/8" bolt
(x3)
#A50415
handle
(x2)
#A65640
hinge
(x5)
#A43105
foot
12
345
6
811
9
(x4)
#A89210
rubber pad
(x4)
#A65615
hinge
7
10

8
systembuild.com
STEP1
3
3
1
(x2) (x1)
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
A
1

9
systembuild.com
STEP2
12
3
1
3
2
(x2) (x2) (x1)
Proper orientation of CAM LOCK
Tip
Assembly
Quick
C
C
left side
right side
2
1

10
systembuild.com
STEP3
1
3
1
3
(x2) (x2)
2
(x1)
2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
B
2
1