System Build 7921403COM User manual

7921403COM
24 in Cabinet
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B347921403COM3
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
systembuild.com
Board Identification
Not actual size
Tube
You
Left Panel
37360015013 Right Panel
37360015023
Bottom
37362015041
Shelf (x2)
37362015051
Back Panel
K73621500
Door (x2)
37921403070
Adjustable Shelf (x3)
37362015060
AB
F
G
H
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
D
E

5
systembuild.com
Board Identification
Not actual size
Tube
You
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
E
F
G
H
A
B
E
D
G
F
F

6
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
10 11
12b
12c
12d
13
(x1)
#A84050
safety bracket kit
(x4)
#A44135
adjustable foot
(x2)
#A50395
handle
(x6)
#A65700
hinge
12
12a
12345
6789
(x8)
#A22620
cam lock
(x8)
#A22610
cam bolt
(x8)
#A12420
5/8" screw
(x4)
#A23030
confirmat
(x12)
#A80250
shelf support
(x4)
#A12930
1-1/8" screw
(x4)
#A17400
bolt
(x36)
#A21110
nail
(x4)
#A89210
door pad

7
systembuild.com
STEP1
Tube
You
(x8)
#A22610
Detach the hinge plate from the hinge arm. Attach the hinge plates to the "A" and "B" panels as shown.
13
hinge arm
brazo de la bisagra
bras de charnière
hinge plate
placa de la bisagra
plaque de charnière
13
13
2
213
(x6)
#A65700
2
2
2
2
2
2
2
Press rear button on hinge
to release hinge plate.
A
B

8
systembuild.com
STEP2
Tube
You
1
12a
12b
(x8)
#A22620
(x1)
#A84050
Proper orientation of CAM LOCK
Tip
Assembly
Quick
E
E
1
1
1
1
12a
12b
Do not fully tighten this
screw in this step.

9
systembuild.com
STEP3
Tube
You
11
36
Unscrew the two piece foot as shown. After top part of foot is attached to
bottom shelf, screw on bottom part of foot. Be sure all four feet are level
with each other.
(x8)
#A12420
(x4)
#A12930
(x4)
#A44135
3
6
11
3
D

10
systembuild.com
STEP4
Tube
You
UNLOCKLOCK
* raw edges are shaded
A
B
E
E