System Build 3720335COM User manual

3720335COM
54" Wall Cabinet
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B343720335COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
systembuild.com
Tube
You

5
systembuild.com
Board Identification
Not actual size
Tube
You
End Panel (x2)
37365335012
Left Partition
37365335020 Right Partition
37365335030
Top
37365335041
Bottom
37365335051
ABCD
E
Adjustable Shelf (x2)
37365335060
Center
Adjustable Shelf
37365335070
FG
Door (x3)
33720335080
H
Back Rail
37365000090
I
J
Bottom Support Rail
37365000101

6
systembuild.com
Board Identification
Not actual size
Tube
You
Wall Hanger
37365000110
KL
Back Panel
K736533500
B
C
A
A
L
E
H
H
H
F
F
G
D
I
J
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.

7
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
12
4
7
5
6
3
8
10
(x12)
#A22620
cam lock
(x12)
#A22610
cam bolt
(x16)
#A13430
1-3/4" screw
(x6)
#A17400
bolt
(x12)
#A80250
shelf support
(x6)
#A89210
door pad
(x4)
#A21500
steel dowel
(x4)
#A13800
2-1/4" screw
(x3)
#A52680
handle
(x6)
#A65615
hinge
9

8
systembuild.com
STEP1
Tube
You
2
(x12)
#A22610
2
A
2
2
2
2
2
x2

9
systembuild.com
STEP2
Tube
You
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
(x8)
#A22620
1
1
1
1
1
1
1
1
D
E

10
systembuild.com
STEP3
Tube
You
1
13
1
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x4)
#A22620 (x4)
#A21500
J
I
3
3
3
3

11
systembuild.com
STEP4
Tube
You
UNLOCKLOCK
A
E
finished edge

12
systembuild.com
STEP5
Tube
You
4
(x4)
#A13430
4
4
4
4
A
B
C
E
finished edge
s
facing down

13
systembuild.com
STEP6
Tube
You
finished edge
s
facing down
A
I
J
BE
C
UNLOCKLOCK

14
systembuild.com
STEP7
Tube
You
UNLOCKLOCK
4
(x4)
#A13430
4
4
4
4
1st
2nd
A
I
J
E
B
C
D

15
systembuild.com
STEP8
Tube
You
UNLOCKLOCK
D
I
J
L
A
raw surface

16
systembuild.com
STEP9
Tube
You
4
(x5)
#A13430
4
4
1st
2nd
4
4
4

17
systembuild.com
STEP10
Tube
You
4
(x3)
#A13430
J
E
4
4
4

18
systembuild.com
STEP11
Tube
You
8
(x4)
#A13800
8
Wall to be
mounted to.
I
K
With the assistance of another person, locate and mark the studs in the wall that the cabinet will be
mounted to. Mark the location of the of the studs with a pencil. Position the wall hanger (K) on the
wall and mark the locations of the studs on the wall hanger. Drill four 3/16" diameter holes in the wall
hanger (K) at the stud locations. Using a level, attach the wall hanger (K) to the wall with four screws
(8) as shown. It is important that the wall hanger is mounted to a minimum of at least two studs.
With the help of another person, place the assembled component onto the wall hanger (K) so the two
beveled edges on the back rail (I) and wall hanger (K) mate together.
K
D
8
8
8

19
systembuild.com
STEP12
Tube
You
6
(x6)
#A89210
(x6)
#A65615
10
7
(x6)
#A17400
(x3)
#A52680
x3
H
9
6
67
7
10
10
9

20
systembuild.com
STEP13
Tube
You
H
x3