Takara Belmont YUME ESPOIR User manual

1
TAKARA BELMONT SHAMPOO EQUIPMENT
Basin body : EX-ESYM* / EX-ESSS*
Seat body : SC-ESF* / SC-ESL* / SC-YMSI*
Seat : SU-ESB* / SU-ESP* / SU-YMSI* / SU-YMNB*
Base plate : EA-ESBP
Model No
YUME SUITE
YUME ESPOIR
2022.09 Version 9
No.1A04NJD0
Operating Instructions
Thank you for purchasing this Takara Belmont product.
The instructions contained in this booklet should be thoroughly read and understood before use.
Using this product before reading this operating instructions may result in an accident.
This product is professional shampoo equipment for use in a beauty salon.
Only use this product for its intended purpose and do not use it for non-hairdressing work.
Keep this instruction and refer back to them when required.
For installation and assembly of this product, ask our company or a contractor designated by us.
Image is ofEX-ESSS*/SC-ESF*/SU-ESBF*/EA-ESBP
EX-ESSS*/SC-YMSI*/SU-YMSI*/EA-ESBP
EX-ESYM*/SC-YMSI*/SU-YMNB*/EA-ESBP
YUME NOBLE

2 2
Table of Contents
Introduction
Preparation
How to Use
Maintenance
Description of Warning Symbols .................................................................................. 4
Safety Precautions ...................................................................................................... 5
Precautions for Use ................................................................................................ 12
Precautions for Handling Synthetic Leather ....................................................... 14
Precautions For Use Of Basin Products ............................................................... 14
Precautions For Use Of Resin-plated Parts ......................................................... 15
Position of Warning Labels ................................................................................... 15
Before Using This Product ..................................................................................... 16
Accessories ............................................................................................................. 16
Name of Parts ......................................................................................................... 17
Remove the Cover .................................................................................................. 19
Sponge Installation ................................................................................................ 19
Installation of the Cover ........................................................................................ 19
Attach neck cushion ............................................................................................... 20
Remove neck cushion ............................................................................................ 22
Attach head pillow ................................................................................................. 23
Using the Lumber Cushion *SUITE and NOBLE only .......................................... 23
Power Source .......................................................................................................... 24
Lifting/Lowering the seat ...................................................................................... 25
Changing the preset position ................................................................................ 27
Using the Shower head .......................................................................................... 28
Adjusting the volume of water .............................................................................. 29
Adjusting the water temperature ......................................................................... 30
To fill up basin with hot water ............................................................................... 32
When shampooing .................................................................................................. 33
Space between the seat and basin ....................................................................... 38
Maintenance ........................................................................................................... 39

3
Before Requesting Repairs ................................................................................... 47
Daily Inspections .................................................................................................... 48
Standard Duration of Use ...................................................................................... 51
Parts Replaced on a Regular Basis ....................................................................... 51
Consumable Supplies ............................................................................................ 52
Disposing of This Product ..................................................................................... 52
After-sales Service ................................................................................................ 52
Specifications ......................................................................................................... 53
Dimensions ............................................................................................................. 55
When Necessary
Table of Contents

4
Description of Warning Symbols
The precautions listed here are to ensure that this product can be used safely, and to prevent any danger
or risk to the person using this product or those around them.
These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara
Belmont is not responsible for any damage or risk to the person using this product or those around them
due to accidents if this product is used without adhering to the "Safety Precautions", "Precautions for
Use" and "Precautions for Handling Synthetic Leather". In this case, the person failing to adhere to the
"Safety Precautions", "Precautions for Use" and "Precautions for
Handling Synthetic Leather" will be responsible for any damage or risk incurred.
Detailed descriptions of symbols are provided below. Read and understand these symbols thoroughly
before reading this instruction.
The "Safety Precautions", "Precautions for Use" and "Precautions for Handling Synthetic Leather"
contained in this booklet should be thoroughly read and understood before use.
■Before using this product
■Precautions listed here
If this symbol is ignored and the product is used, "there is the risk of death or
serious injury to the user".
If this symbol is ignored and the product is used, "there is the risk of light or
moderate injury or physical damage".
Classification Level and urgency of harm or damage
The specific points that are to be abided by are explained using the following symbols.
Symbols of prohibited matter Symbols of guidance or instruction
Common prohibited actions
Prohibited disassembly or
repairs/modifications
Guidance or instruction regarding
common user actions
Remove power plug from the power
outlet
Warning
Caution
Notification of high temperature
warning

5
Safety Precautions (Adhere to these precautions at all times)
Cautions on Power Plugs/Power Cords
Warning
● Do not pull-out or insert a power plug with a wet hand
Touching a power plug or outlet with a wet hand may cause an electrical shock.
● Use a dedicated power outlet for power plug
Use a dedicated and grounded power outlet. Simultaneous use with other appliances may
cause ignition by abnormal heating of the outlet.
● Securely insert the power plug
Insert the power plug into the power outlet all the way to the base.
Insecure insertion may cause ignition due to short-circuiting or heating.
● Hold onto the power plug for pulling
When removing the power plug, hold the power plug, instead of the cord itself, and pull to
remove.Pulling the power cord may damage the power cord and cause an electrical shock or
ignition.
● Pull off power plug when not used
When not using, turn OFF the power switch and pull the power plug from the outlet.
Careless operation may cause an unanticipated accident or a fire from short-circuiting due to
degraded insulation.
● Securely connect the grounding wire
Without connecting the ground, it may cause electric shock when there is a malfunction or
ground leakage. Contact a professional for grounding.
● Regularly remove dusts on the power plugs
If dust adheres to the power plugs and outlets, thoroughly wipe off using a dry cloth. Use as is
may cause ignition.
● Pay attention to damage to the power cords and power plugs
If the power cords or power plugs are damaged or the fitting of the power outlet is loose, stop
using. There is a risk of short-circuiting or ignition.
Precautions on Installation/Moving
● Precautions for installation
- Install this product according to the installation manual.
- This product must be installed and assembled by a dedicated party (our company or a
contractor designated by us).
- Be sure to install the product on a flat, rigid floor and secure it.
- Install this product so that it does not make contact with any surrounding objects.
● Handle the power cord carefully.
A damaged power cord may cause electrification or fire.
- Do not damage the cord.
- Do not place any object on the cord.
- Do not rework the cord.
- Do not heat the cord.
- Do not excessively bend, twist, or strain the cord.

6
● Do not allow a customer to lie with face down
Unexpected movement of the seat may cause injury.
● Do not sit on the legrest
Damage to the seat.
Precautions for Use/Maintenance
● Do not allow the hands, fingers, part of body/clothes of the customer and the user to
approach the movable portion and its periphery
There is a risk of pinching injury.
● Do not use in an environment where there is electromagnetic interference
Do not set up a seat in the periphery of a device that generates electromagnetic waves,
such as communication facility or elevators. Furthermore, do not use an instrument that
generates electromagnetic waves, such as mobile phones, near the periphery of this
product. There is a risk of malfunctioning.
● Do not operate the foot control while seated on the stool
When operating the seat for shampooing, do not operate the foot control while still
seated on the stool. When operating the seat, first move in front of the foot control and
check that there are no objects obstructing movement of the seat.
● Do not lean on the basin when working between the seat and basin
Leaning on the basin may cause the basin to fall over. Also, coloring dyes on the neck
cushion or basin may stain the user's clothes.
● Two or more persons must not get on the seat
Do not allow a person that weigh more than 135 kg to get on
The withstand load of the seat is 135 kg. Use of the seat in an unstable condition or with a
load greater than the withstand load may cause the product to fail or break, possibly
leading to injury.
● Do not sit on the backrest, leg rest, or basin
Do not sit on or apply a heavy load to the backrest, leg rest, or basin. Otherwise, you may
fall and become injured or cause this product to break.
● Do not stand on the seat
Otherwise, you may fall and become injured or cause this product to break.
Safety Precautions (Adhere to these precautions at all times)
Warning
● Do not spray areas other than the basin with water
- Take care not to spray areas other than the basin with water. If water does come in contact
with areas other than the basin, wipe them dry as soon as possible. Water entering the main
body may cause malfunctions or a ground leakage fire.
- Take care not to allow water to drip on the floor. If water does drip on the floor, wipe it dry
as soon as possible. Failure to follow this instruction may damage the floor, or cause water
leakage.
● Do not use the auto return function when an elderly customer or a small child is seated
There is a risk of injury by forcing the customer to assume an improper posture or applying a
force. Use the manual switches and operate while securely observing customer conditions.
[page 26]

7
● Pay attention to not touching a switch during operation
Pay careful attention so as not to inadvertently touch the foot control during service to
activate the product or stumble on the foot switch or base plate. Otherwise, the product may
abruptly move, possibly causing injury.
Precautions for Use/Maintenance
● Stop using this product if it does not move, or if it feels like there is a problem present
Stop using this product if the seat does not move, or if it feels like there is a problem present.
● Be careful of the space between the legrest and floor
When the seat is lowered, the end of the legrest comes extremely close to floor level. When
lowering the seat, always check and make sure that there are no people or objects under the
seat. In particular, take care to check for babies or children. The seat may become damaged if
people or objects become trapped between the legrest and floor.
● Take care not to step on the foot control when working between the backrest and basin
body
Take care not to step on the foot control when working between the backrest and basin.
Accidentally stepping on the foot control may cause the backrest to recline, trapping the user.
If the user thinks that they may become trapped, follow the steps provided in "Description of
backrest anti-trap mechanism [page 38]" to move out from between the backrest and basin.
● Pay attention to the customer and children
- During the use of this product, pay attention to keeping the eyes on the customer. There is a
risk of unexpected accident by false operation due to unintended contact by the customer
(especially a child).
- Do not let a child approach this product except during the treatment.
Safety Precautions (Adhere to these precautions at all times)
Warning
● Take care of the space between the seat and wall at the front
When lifting or lowering the seat, check that there is sufficient space between the customer's
feet and wall in front. If the customer's feet hit the wall, it may cause injury.
<ESPOIR Fixed legrest Type>
The seat slides forward approximately 65 mm when being lowered.
<ESPOIR Movable legrest Type>
The seat slides forward approximately 30 mm when being lifted.
<SUITE> <NOBLE>
The seat slides forward approximately 5 mm when being lifted.
● Adhere to the following when operating the seat
When operating the seat, check and make sure that there are no people or objects around the
seat. The seat may hit them when operating, leading to injury.
● Pay attention so that the customer does not sit up while the seat backrest is set horizontally
With the seat backrest set horizontally, if a force is applied to the armrest of the backrest from
above, the backrest sits up for a structural reason. In such a case, the customer may lose
balance and get injured. [page 34]

8
Precautions for Use/Maintenance
● Turn the power off if this product is not going to be used for a long period of time, or during
maintenance
Always turn the power off after work, if this product is not going to be used for a long period
of time, or during maintenance. Failure to follow this instruction may cause ground leakage
fires, electric shock or burns due to insulation deterioration.
● Adjust the water temperature while checking the temperature by hand
When adjusting the temperature of the water, reduce the volume of water, point the shower
head away from the customer and check the temperature by hand. Take care when doing so,
as hot water may come out of the shower head.
Safety Precautions (Adhere to these precautions at all times)
Warning
● Precautions to observe when a customer gets on and off the seat
- When a customer gets on and off the seat, be sure to lower the seat to its lowermost posi-
tion. When a customer gets on and off a wheelseat, also make sure that the wheelseat is not
located within the operation range of the seat. If a foot or caster hits the foot control causing
the seat to unexpectedly move, the customer may get injured or the product may break.
- When a customer gets on and off the seat, guide the customer so that he/she does not trip
over the power cable or fall.
● After using hot water, return the thermostatic control knob to the proper temperature
- After using hot water, return the thermostatic control knob to the proper temperature. If the
shower is used without returning the temperature setting, the customer or you may get
burned.
- If another device that uses a shared water/hot water supply source is used at the same time,
the water temperature may become unstable. If multiple devices are used, slowly turn the
thermostatic control knob to adjust the water temperature.
● Never neglect the daily checks
If the product is used without implementing the daily inspection, injury or breakage of this
product may result.
Refer to [page 48 to 51] for daily checks.
● Precautions for operation and setting up the presetting position of seat
- Before and during operation of the seat, pay careful attention to ensure that there is no part
of the body or object in or around the working range. Otherwise, you or the other person
may be pinched by the seat, possibly leading to breakage of this product or injury.
- When the seat is operated, confirm that the customer is sitting back in the seat and the feet
are on the step; keep your eyes on the customer during the operation.
- Do not touch an operation switch with a wet hand. There is a risk of electrical shock.
● Turn the power off at the switchboard if this product is not going to be used for a long period
of time
Turn the power off at the switchboard if this product is not going to be used for a long period
of time, such as when the shop is closed. Failure to follow this instruction may cause ground
leakage fires, electric shock or burns due to insulation deterioration.

9
● Turn OFF power switch and pull off power plug for a maintenance
Failure to follow this instruction may cause an electric shock or fire. An unexpected move-
ment of this product may cause injury.
Precautions for Use/Maintenance
● In case of power outage
- For prevention of an unexpected action when the power is restored from an outage, turn
OFF power switch and pull off the power plug of this product from the outlet.
- When the power went out when the seat was at a high position, the descending operation
will not be possible. Pay special attention to prevent injury to the customer or overturning
of the seat by helping the customer get off in such a situation.
● Disassembly and repairs/modifications are prohibited
- Never disassemble or repair the seat by anyone other than the after-sale service personnel
of our company. There is a risk of accident, failure, electrical shock, or fire.
- It is dangerous to remodel this product. Never remodel it.
● Do not use hot water (boiling water) of 60°C or higher
Using hot water of 60°C or higher may deform or damage the basin, shower head and taps.
Safety Precautions (Adhere to these precautions at all times)
Warning

10
● Do not make an impact on the product
Otherwise, the cover or the like may break or malfunctioning or breakage of this product may
cause injury.
Precautions for Use/Maintenance
Safety Precautions (Adhere to these precautions at all times)
Caution
● Do not use while the cover is damaged
If a cover is damaged by any chance, promptly contact our call center for a replacement. The
continuous use may cause a failure or accident.
● Do not drink the hot water
This product is designed for washing hair. Do not drink the hot water. The water quality may
cause diarrhea or stomach pain.
● Do not use with the plating peeled off
If the plating of the faucet metal fittings (tap, thermostatic control knob) is peeled off.
If use them with the plating peeled off may cause injuries.
● Do not turn the water fully on with the shower head in the shower head bracket
Failure to follow this instruction may cause water to spill out of the basin, covering the
customer with water. When turning the water on with the shower head in the shower head
bracket, check the surrounding area and turn the tap slowly.
● Do not use the product in a place where freezing is expected
Failure to take this precaution may result in breakage of parts, thus resulting in water leaks.
Repair of breakage due to freezing will result in fees being charged even during the warranty
period. If freezing is expected, maintain the room temperature at 0°C or above by using a
heater.
● Do not use a scourer
Do not use a scourer to clean the shower head, shower head bracket or covers. Using hard
cleaning tools such as a scourer or a sponge with a scourer, metallic scouring pad or nylon
scouring pad may cause scratches.
● Do not use outdoors
This product is designed for indoor use. Do not install this product outdoors or within a
vehicle. Be sure to only use this product inside a barber or hair salon. Failure to follow this
instruction may cause malfunctions or damage to the main body.

11
Precautions for Use/Maintenance
Safety Precautions (Adhere to these precautions at all times)
Caution
● Users should take care to be aware of their surroundings when working between the seat
and basin
Carrying metallic objects such as scissors while working may scratch the basin and the
backrest.
● Take care of the step between the base plate and the floor
There is an approximately 6 mm step between the base plate and the floor. Take care not to
hit the step when walking. The user may trip, causing injury.
● Be sure to operate the power switch section by hand
Except for the foot control, be sure to operate the switches by hand.
Operation of the product with body parts other than the hand may cause the product to break
or malfunction.
● Take care of the foot control cable
Take extra care so that the customer does not catch or kick the foot control cable when they
get on or off this product. Failure to follow this instruction may cause the customer to fall
over, or cause damage to the unit.
● Support the customer's head by hand when lowering or lifting the backrest
Support the customer's head by hand when lowering or lifting the backrest. Failure to follow
this instruction may cause the customer to hit their head on the basin.
● Always wipe the floor clean if it is wet
Wipe the floor as soon as possible if it is wet after shampooing.
Failure to follow this instruction may cause the floor to deteriorate or the product to fail.
● Take care when handling the shower hose
- When using the basin, check that the shower hose is not trapped around feet or under the
stool. Failure to follow this instruction may cause damage to the basin.
- Do not step over the shower hose to use it. Failure to follow this instruction may cause the
shower hose to become caught on the basin, leading to injury.
● Before use, be sure that all the parts are operating normally.
Inspect the product, paying attention to any looseness, rattling, inclination, vibration,
noise, temperature, smell, or any other anomalies.
If any anomaly is sensed, stop using the product immediately, turn off the power switch,
disconnect the power plug, and contact your local Takara Belmont dealer for advice.
● Maintenance precautions.
The metal components and mechanisms of this product include sharp edges.
When cleaning the product, be careful not to injure your hands or fingers.
● Turn off the power switch after use.
Inadvertent contact with the foot switch may move the chair unexpectedly, possibly
causing injury or damage.

12
Precautions for Use
● Do not use for purposes other than beauty/barber treatment
This product is a professional device intended for the use in beauty and barber salons.
Shall not be used by persons other than specialists in barber/beauty treatment or a person qualified as
an esthetician.
● The maximum load is 1,350 N (135 kgf)
The rising speed may be slower when the load is near the maximum value.
● Do not apply heat
It will be the cause for the alteration of quality/color.
● Do not allow a sharp object to contact the leather
If a sharp object, such as scissors, contacts the leather, it may tear.
● Do not put an object other than human on the seat
It may cause the deformation or breaking of leather or corrosion.
● Promptly wipe off when chemicals have adhered
When the chemicals have adhered to the leather, base covers, etc., promptly wipe off.
It may cause a change in quality/color.
● Do not use strongly acidic or strongly alkaline cleaning solvents
Do not use cleaning solvents containing mainly caustic soda (NaOH) or caustic potash (KOH) to clean
the drain pipe. Never pour thinners, alcohol, nail polish remover, gasoline or kerosene into the drain.
Failure to follow this instruction may cause damage to the drain hose.
● Do not apply steam directly to the leather
When using the steam to perform hair/scalp care and other work, do not apply the steam directly to
the leather. Failure to follow this instruction may cause degradation of the leather.
● Do not forcefully lift the seat, backrest, or leg rest
Otherwise, the seat may malfunction or fail.
● After use, wipe water away from all parts other than the basin
Leaving the unit with water on it may cause damage to the main body, and make dirt difficult to
remove.
● Lower the seat to the lowest position after working hours
Lower the seat to the lowest position after working hours. In this condition, no load is applied to the
mechanical parts of the product, lengthening its service life.
● Do not remove the cover of holder forcibly
Failure to follow this instruction may cause damage to the product.
● Put shower head securely into the holder
Failure to follow this instruction may cause water to spill out of the basin, covering thecustomer with
water.
● Do not collect water until it overflows from the shower hose slot
The amount of water should be below the designated maximum water level. [Page 32]

13
Precautions for Use
● Do not touch the hot water supply pipe or mixing pipe
The hot water supply pipe or mixing pipe may become very hot. Do not touch the pipes directly.
● Always use the neck cushion
Using this product without the neck cushion may apply unnecessary load to the customer's neck,
causing injury. Always use the neck cushion.
● Do not use a peppermint oil or aroma oil
Do not use any peppermint oil or aroma oil that contains menthol. The oils may cause damage to resin
parts, such as the shower head, shower head holder, shower hose, tap, thermostatic control knob,
neck cushion, hair catcher, and drain cap.
The leather on the backrest, seat, leg rest, or Lumber cushion may deteriorate.
● Do not cover the drain outlet when this product is not going to be used
Do not cover the drain outlet with the drain cap, towel, or shampoo cloth after finishing the work.
Water may overflow the basin when water is improperly discharged or a small amount of hot water is
discharged due to an increase in water pressure during the night, resulting in water leaks. Be sure to
remove the trap cover from the drain outlet when the product is not in use.
● Return the shower head to the shower head bracket so that the spray nozzle faces the basin
Failure to follow this instruction may cause water to spill out of the basin or splash on the customer
with water.
● Set the water temperature for this product to 80˚C or less
Failure to follow this instruction may cause malfunctions or damage in parts such as the stop valve,
check valve, flexible pipe and thermostat water valve.
● Do not drop heavy objects on to the basin
Do not place or drop heavy objects on to the basin. Failure to follow this instruction may cause damage
such as scratches or cracks to the basin.
● Close the tap firmly
After use or shampooing is complete, turn the taps firmly in a clockwise direction and turn the water
off completely. Failure to turn the water off completely may cause water leakage.
● Do not leave the shower head immersed in water
If pressure in the water pipes decreases due to repairs that follow water stoppages, the water in the
basin may flow back through the shower head.
● Clean the hair catcher regularly
Clean the hair catcher as regularly as possible.Continuing to use the hair catcher without cleaning it
may cause the drain to become blocked with hair, leading to water overflowing and unhygienic
conditions. Try to clean the hair catcher after each shampoo.
● Do not wet the shower head bracket with water
Failure to follow this instruction may cause water leaks.
● Do not hit an object against the top surface (cap) of the resin knob
Do not hit a hard object against the tap and thermostatic control knob, which are made of resin. A
scratch or crack may be made on the plated surface and then the plating may detach, which may cause
injury.
● In cold regions, ensure that water is removed
When using this product in winter in cold regions, open the maintenance cover and open the check
valve filter to remove water and prevent freezing.
Failure to follow this instruction may cause water leakage.

14
Precautions For Use Of Basin Products
Precautions for Handling Synthetic Leather
● Stains caused by clothing dyes
The synthetic leather of this product may become stained by direct contact with clothes or belts.
If there is stains, wipe clean as quickly as possible with a 10% detergent solution diluted using
water to prevent permanent staining. Then, wipe using water and conduct a thorough dry wiping
after that.
● Take care of deformation or stains due to direct contact
- Direct contact with other objects such as plastic products, painted items, solvents or adhesive
tape may cause changes to the surface luster, cracking, deformation or peeling.
- Direct contact with newspaper or printed paper may cause stains.
- Direct contact with items of clothing such as printed images of t-shirts, or jeans may cause
discoloration of the synthetic leather of this product.
- Direct contact with solvents such as benzene, nail polish remover, alcohol, oil (including beauty
treatment oils) may cause discoloration, melting of the surface, elution of the plasticizing agent,
changes to surface luster, hardening/softening or peeling.
- Using bleach or bleached sheets may cause changes to surface luster or discoloration.
- Installing this product next to sources of excess heat such as irons or heaters may cause defor-
mation or discoloration.
- Protect this product from direct sunlight by installing curtains. Failure to follow this instruction
may cause changes, shrinking, discoloration or fading of the leather surface.
- Placing heavy objects for a long period of time may leave an imprint or wrinkles on the synthetic
leather that cannot be removed.
● Specifications of synthetic leather of this product
[SUITE]
The synthetic leather used on this product has fine irregularities on its surface and is not lippery. As
its surface has a mat finish, attached dirt may become conspicuous.
[NOBLE]
The synthetic leather used on this product expresses the texture of genuine leather and has a
slippery characteristic.
You may also see the white inner layer through the thread holes in the seams.
The leather on this product has wrinkles (gathers) for design purposes. The wrinklepattern may vary
in width, length, or interval depending on the manufacturing method. Also, to make the seat cushion
voluminous, a soft cushion material is used. In the course of long use or depending on the usage
conditions, the wrinkles may become flattened.
This product uses pottery for the basin.
Note in advance that bends and deformations cannot be avoided depending on the product in molding
of the neck position and the pottery, and there are slight variations in height, shape, and weight.
In addition, because of the nature of pottery, pouring hot water in a pottery part may result in a sudden
expansion of that part, causing cracks in the surface.
Do NOT pour hot water in the pottery. Failure to follow this instruction may damage to the pottery,
causing injury, or cause water to enter the upper unit due to a water leak, resulting in formation of rust.

15
Position of Warning Labels
Precautions For Use Of Resin-plated Parts
● The tap and the thermostatic control knob of this product are resin-plated
- The plating is a thin and hard metal film, which may cause cracks and peeling in the plated
surfaces due to corrosion and aged deterioration.
- An impact of falling objects may cause flaws and cracks in the plated surfaces.
- If a hard object hits, flaws, and cracks may be caused on the plated surface.
- Starting from a flaw or a crack on the plated surface, peeling of the plating may occur.
Before use, check that there are no scratches, cracks, nor peeling of plating on the
plated surface of the tap and the thermostatic control knob.
If you keep using the equipment, you may become injured.
Caution
An example of peeling
on the plated surface
An example of scratches
on the plated surface

16
Before Using This Product
Accessories
<For back wash basin> <For side wash basin>
<Same parts for back wash (same as YUME basin), side wash basin>
- The back wash (YUME) basin is a shampooing product designed for performing back shampooing*1 or
hair/scalp care.
- The side wash basin is a shampooing product designed for performing side shampooing*2 or hair/scalp
care.
- The back approach*3 to this product is designed for performing shampooing while seated.
For performing shampooing more comfortably, the use of a ESPOIR stool (sold separately, part No.
ES-ESST) is recommended.
- Check that all accessories have been attached properly.
- Please note that the gap between covers may vary slightly from product to product.
- There is a slight gap between the basin and the cover. This is because the basin is made of ceramic,
and is not indicative of defective quality.
- Please note that the gap between the backrest and the basin when the backrest is reclined may vary
slightly from product to product.
- Please note that the neck position and height may vary slightly from product to product as the basin is
made of ceramic material.
*1 Back shampooing: the user sits behind the basin and performs shampooing from the back (back position).
*2 Side shampooing: the user stands next to the basin and performs shampoo from the side (side of basin).
*3 Back approach: the user performs hair/scalp care and the like from behind the basin.
・Mohair tape for
replacement...1
・Neck cushion...1
・Installation instructions...1
・Instruction...1
・YUME SPA Technical Manual(except for China)...1
・Neck core...1・Neck cushion...1・Head pillow...1 set
・Drain cap...1・Hair catcher...1 ・Sponge...1
Thin hose: Inside diameter ɸ13.5
Thick hose : Inside diameter ɸ18

17
Name of Parts
The external cover is made of plastic. There may be
streaked lines or different shades. However, these
are a result of the external cover manufacturing
process and not indicative of a defective product.
Power switch section Foot control
DN UP
Lumber cushion
Main body
Preset button
Automatic return button
Power switch Seat lifting switchSeat lowering
switch
Power switch
section
Backrest cover
Foot control
Base plate
Main body cover
(front)
Legrest
Backrest
Shower head bracket
Seat
Armrest of backrest
[page 34]
SUITESUITE
ESPOIRESPOIR
Legrest
Backrest
Seat
Backrest
Seat
Base cover
NOBLENOBLE

18
Shower head
Dual function shower headDual function shower head
YUME shower headYUME shower head Side shower headSide shower head
Protrusion
Shower head Shower head
*
Shower head
Shower head
plate
Foaming water outlet
Selection
switch
Spray nozzle
Spray nozzle
The back wash (YUME) basin has bumps in the
area marked with the * symbol.
However, these are a feature of the ceramic
basin manufacturing process and not indicative
of a defective product.
Basin body
For Back wash (same as YUME basin)For Back wash (same as YUME basin) For Side wash basinFor Side wash basin
Name of Parts
Head pillow
Maintenance cover Shower hose
Mohair tape
(inside cover)
Basin
Thermostatic
control knob
Shower head
Drain cap
Neck cushion
Neck core
Mohair tape
(inside cover)
Shower hose
Maintenance cover
Main body cover (rear)
Tap
Tap
Main body cover (rear)
Shower
head
Thermostatic
control knob
Neck cushion
Drain cap
Cover
Sponge
Sponge holder
Shower head
holder
Shower head holder

19
Remove the Cover
Sponge Installation
１Turn the cover counterclockwise.
Turn the cover around 5 degrees.
【Image】
２Pinch the front and back of the cover
to deform and remove the catch.
Catch
Cover
Attach the sponge to the shower hose.
Attach the sponge and sponge holder to the shower
hose, between the shower head holder and the
cover.
Installation of the Cover
Align groove in the cover and protrusion of the holder until they snap into place.
Protrusion
Sponge
Cover
Sponge holder
Shower head
holder
Do not remove the cover of holder forcibly.
Failure to follow the instruction may cause damage the product.
Caution
Ensure that the harder side of
sponge is facing upwards.
Caution
Note: Harder side of sponge to be
facing upwards.

20
Attach neck cushion
Back wash (same as YUME basin)Back wash (same as YUME basin)
The fastening pins can be removed.
Take care not to lose the fastening pins.
The short edge faces
the basin side
The long edge faces
the seat side
Snap button
Snap button
Align the neck cushion as shown in the
illustration, and fit the neck
cushion on the attachment fittings.
Attach the seat side snap buttons of the
neck cushion to the fastening pins on the
attachment fittings.
Adjust the shape of the neck cushion to
fix it to the attachment fittings, and attach
the basin side snap buttons of the neck
cushion to the fastening pins.
Snap button
Neck cushion
Attachment fitting
Fastening pin
１
２
３
Make sure the attachment direction is correct.
Seat sideSeat side
Basin sideBasin side