takepayments iWL251 User manual

We make it easy.
Your iWL251
installation guide.

Plugging in the
power supply.
Take the power cable and plug it into the
circular port on the base unit, as
shown opposite.
Placing your terminal
on the base.
It should just click into place. You’ll know it’s connected as the
terminal will automatically power up.
How to install.
Once the terminal has powered up, you’ll see the screen opposite.
Type in your merchant number and press 'Enter' when done.
You can find it in your welcome email.
Once completed, the terminal screen will display a READY
prompt and show your merchant number.
To make sure the terminal is fully installed, we recommend
doing a test transaction of 1p. You can find out how to do this in
your Ingenico IWL251 Quick-Start Guide.
and then press ENTER
1.
2.
3.
Power supply
Terminal Installation
Key In Merchant No.
(6 digit number)
iWL251
3
1. Plugging in the power supply.
2. Placing your terminal on the base.
3. How to install.
Our easy guide will help you get up
and running in no time.
We'll cover:
We’re excited to
have you on board.

We’re here to help
make things easy.
For any installation questions,
give our team a call on:
01606 566 600
Monday-Friday, 9am-5pm
Authorised and regulated by the Financial Conduct Authority. takepayments is a limited company registered in England and Wales under
company number 3102137 and is officially licensed by Mastercard and Visa International as an Independent Sales Organisation and
Member Service Provider, and works in association with a number of Merchant Acquirers, the preferred one being Barclaycard. These
acquirers undertake the processing of card transactions.
In association with
takepayments.com