takepayments M3500 3G User manual

We make it easy.
Your M3500 3G
installation guide.

Plugging in the
power supply.
1.
Power supply
2. Connecting your terminal
to the base.
Take the power cable and plug it into the circular port
on your base unit.
First, turn the base upside down and you’ll see a clip
(similar to where a battery would be stored).
Unclip it and you’ll find the circular power port
shown on the right.
After you’ve plugged the cable in, you can reclip the
casing back onto the base.
Our easy guide will help you get up and running in no time.
We’re excited to have you on board.
2
1. Plugging in the power supply.
2. Connecting your terminal to the base.
3. How to install your terminal.
We'll cover:
Take the terminal and place it onto the base unit.
It should click into place.
You’ll know it’s connected as the terminal will start to
automatically power up.

Once completed, the terminal screen will display a
READY prompt and show your merchant number.
To make sure the terminal is fully installed, we
recommend doing a test transaction of 1p. You can
find out how to do this in your Ingenico M3500 3G
Quick-Start Guide.
For the Supervisor code, you won’t be able to use a code
like ‘1234’ or 4 digits that are the same like ‘0000’.
Type in your merchant
number and press ‘OK’.
You can find it in your
welcome email.
Confirm the code you’ve
chosen by typing it in
again and press ‘OK’.
This screen will show
before going to the next
screen automatically.
This screen will show
before going to the next
screen automatically.
You’ll need to set up a new
supervisor code for admin
access to the terminal. Type
in a memorable code, and
press ‘OK’.
The terminal will then
reboot.
1
5
2
6
3 4
Terminal
Installation
Key In Merchant No.
Contacting GEMS
via mobile network.
READY
Merchant number:
11111
GPS signal
detection
in progress.
Supervisor
Enter new 4 digit
supervisor code.
Supervisor
Confirm new 4 digit
supervisor code.
and then
press OK Please wait...
Please wait...
and then
press OK
and then
press OK
M3500G
3
3. How to install your terminal.
Power your terminal up and please select your region, which will be GB + NI. Press
‘Enter’ and it will show the first screen below. Follow the steps to install your terminal.

We’re here to help
make things easy.
For any installation questions,
give our team a call on:
01606 566 600
Monday-Friday, 9am-5pm
takepayments Limited. Registered in England and Wales under company number 3102137. 4th Floor, Highbank House, Exchange Street,
Stockport SK3 0ET. Authorised and regulated by the Financial Conduct Authority. takepayments is officially licensed by MasterCard and Visa
International as an Independent Sales organisation and Member Service provider and works in association with a number of merchant
acquiring providers who undertake the processing of card transactions.
In association with
takepayments.com