
Product Content
Specification
Operation & Caution
Features
Frequency Response: 90Hz-12KHz
Rated Output Power: 4W
Max. Output Power: 8W
Output Impedence: 4Ω
Battery Specification: 3.7V/1000mAh lithium-ion battery
Power Adaptor: DC 5V 600mA
Recharging Time: 4-6hrs
Playtime: ≥15hrs
Dimension: 92×72×27mm
Net Weight: 122g
“ ”
Rare earth material speaker features light weight, excellent sound
quality and loud output volume
Digital circuitry technology, 8W output power
Powered by high capacity rechargeable polymer Li-ion battery
Built-in MCU intelligent recharging management system for reliable
battery operation, fast charging time (4-6hrs) and long play time
(more than 15hrs)
With AUX audio signal input function, as a small speaker
Compact and elegant design, durable ABS construction
Choices of waist or shoulder hanging wear style for convenient use
Small size and lightweight Mini amplifier
1
23
8
E129
1. Wear the headworn microphone correctly and adjust the suitable
microphone pick-up angle
2. Insert Φ3.5mm microphone plug into MIC in socket
3. Turn on the power, the power indicator will light up, then adjus the
volume
4. If the power indicator lights red, it means the battery power is low,
please recharge timely
5. This unit has perfect protection function. When the protection
function works, it needs recharging to recover.
Dear User:
Thank you for purchasing TAKSTAR E129 . Please read
the user manual before operation and keep it for reference in future.
Digital Amplifier
Function Illustration
How to Use
① Power switch and volume adjustment knob: rotate the knob to
till you hear “di”to turn on the amplifier, and the power indicator
②lights up, rotate to left continuously to increase the volume;
rotate to right to decrease the volume till turn off.
② Power indicator: it lights up when the amplifier is on. Green means
the power is normal, red means the power is low, please recharge
timely when the LED lights red.
③ MIC IN input socket: insert the microphone plug to this socket to
amplify; please do not point the microphone to the speaker to
avoid howling.
④ LINE IN input socket: connect the amplifier to DVD or MP3 with
Φ3.5mm audio cable, as a small speaker.
⑤ Charging input connector: connect USB charging cable with this
connector, and the other end with USB output charger (e.g. cell
phone charger, PC USB interface, etc) to recharge the battery.
⑥ Charging LED: plug USB charging cable into connector ⑤, and the
charging LED lights up. This means the battery is being recharged.
⑦ Waist wearing buckle
⑧ Shoulder hanging buckle
left
To avoid personal injury or property loss caused by electric shock,
over temperature, fire, radiation, explosion, mechanical risk and
improper use, please read carefully and abide by the following
items before operation:
1. Please check if the power of the connected equipment matches with
that of this product before operation. Adjust the volume to proper
level during operation. Do not operate at over-power or high volume
level for a long time to avoid abnormal functioning or hearing loss.
2. If abnormal phenomenon (smoke, abnormal smell) happens, please
turn off the power switch and disconnect the power plug with power
socket, and send the product to local dealer for maintenance.
3. The product and accessories should be put in dry and ventilated place
rather than humid or dusty environment. Prevent the product from
fire, liquid, rain, water, over-colliding, throwing, vibrating, vent hole
covered to avoid function damage.
4. When the product needs to be installed on wall or ceiling, please fix
it tightly to avoid dropping risk.
5. Please abide by safety rules during operation. Do not use the product
in the place prohibited by regulation or law to avoid accident.
6. Do not disassemble or repair the product by yourself to avoid personal
injury. If you have question or need service, please contact the local
dealer.
7. The applicable altitude and climate condition of this product is subject
to the power supply equipment.
Amplifier
USB charging cable
Headworn Mic
Strap
Buckle
User Manual
GB 8898-2011 9TS0E1291B
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644 Fax: +86 752 6383952 Website: E-mail: sales@takstar.comwww.takstar.com
Amplifier
Note: the above data is obtained from the test of Takstar laboraroty,
and Takstar has the final interpretation right!