Takstar E180 User manual

频率响应：80Hz-12kHz
峰值输出功率:12W
扬声器阻抗:4Ω
工作电压：3.7V
电池规格：3.7V/2000mAh 锂离子电池
充电器规格：DC 5V 600-750mA
充电时间：4-6小时
使用时间：≥20小时
产品规格:86×98×46mm
单机重量:350g
● 为了达到良好的效果，请对准头戴的咪芯（1-2cm) 处发音。
● 将头戴麦克风正确的佩戴在头部，并调整好麦克风的拾音角度，以防方向
不正引起啸叫
● 请根据实际使用空间适当调整音量大小，以获取理想使用效果。
● 长时间不使用时应将电池充满电，以确保电池的使用寿命。
● 请不要将外部音源信号（如DVD、MP3等）从MIC插孔输入, 以免声音幅
度过大而失真。
●
●
为了确保充电器的理想性能，请使用本机配送的DC 5V/600-750mA专
用充电器充电。
非专业技术员请不要擅自拆机改装或维修；如有问题或服务需求请联系当
地经销商。
使用与注意事项
控制面板功能示意图
① 电源开关和音量调整旋钮: 向左转动旋钮, 听到"嘀"一声, 表示扩音器
已通电, 此时电源指示灯②亮, 继续向左转动旋钮声音越大, 反之, 声
音越小直至关机.
② 电源指示灯: 当扩音器通电时, 此灯会亮。绿灯表示高电压, 红灯表
示低电压, 当此灯亮红灯时, 请及时为电池充电。
③ MIC IN 输入插孔: 将ø3.5mm的麦克风插头插入此孔, 进入扩音工作
状态; 操作时, 请不要将麦克风的拾音面朝向扩音器的扬声器, 以免产
生啸叫.
④ LINE IN 输入插孔: 用ø3.5mm插头的音频线将DVD、MP3等音乐信
号导入本机可做为有源音箱使用。
⑤ 充电输入插孔: 将随机配送的5V/600-750mA电源充电器插头插入
此孔, 即可开始对电池充电.
⑥ 充电指示灯: 将充电器插入⑤孔内时, 指示灯亮, 表示电池进入充电
状态; 指示灯由红色变为绿色后, 表示电已充满.
⑦ 肩挂扣
技术参数
教学、导游、培训、促销、宣传、晨练、娱乐等场合扩音使用。
产品特性
E180
欢迎使用 便携式数字扩音器。本产品是专为教学、导游
和参观等而设计的，采用数字技术，提供更长久的电池使用时间和输出
功率，是教学、导游的理想选择。在使用之前，请仔细 阅读说明书，
以便能正确的操作，发挥本扩音器的理想性能。
广东得胜电子有限公司
地址: 广东省惠州市博罗县龙溪镇富康一路2号 电话: 400 6828 333 传真: [phone]
邮箱：[email protected] 邮编：516121 网址：www.takstar.com
数字扩音技术，12W大功率音频输出
采用LOW-THD自适应技术，在大功率输出时也不会产生明显的声
音失真
内置大容量耐久型锂离子电池，可循环充电使用,节能环保
内置MCU充电管理系统，具有电池保护功能，使电池处于安全
可靠的模式下使用；充电只需4-6小时，使用时间可达20小时以上。
具有AUX音频信号输入功能，可充当小音箱使用
壳体采用ABS工程原料成型，坚固耐磨
产品外观设计时尚，具有肩挂及腰挂等多种佩戴方式，使用更方便
1
2
3
4
5
6
7
标准配置
便携式扩音器 头戴麦克风
适配器 绑带 说明书
适用场合

E180
Welcome to use TAKSTAR portable digital voice amplifier. This
product is ideal for teaching, tour guide etc. because of the
excellent digital technology, long battery playtime and high
output power. Please read this user manual detailedly before
using to make sure the correct operation.
Digital circuitry technology, 12W output power
LOW-THD AT Adaptive Technology features low distortion even
at high output power
Built-in high capacity rechargeable lithium-ion battery
Built-in MCU intelligent recharging management system for
secure battery charging and discharging, fast charging time
(4-6hrs) and long play time (more than 20hrs)
With AUX audio signal input function, as a small speaker
Exquisite and durable design
Choices of waist or shoulder hanging wear style for convenient
use
Features
Function Illustration
Specification
1. Aim at the headworn mic capsule when speaking and keep the
distance between vocal and mic as 1-2cm to avoid howling.
2. Put the battery into the battery compartment according to the polar.
3. Wear the headworn microphone correctly and adjust the suitable
microphone pick-up angle.
4. Adjust the volume according to the actual space size.
5. When long time no use, fully recharge the battery to assure the battery
life time, and then take out the battery.
6. Don’t insert external audio signal such as DVD or MP3 into the MIC
socket to avoid distortion due to extreme high voice.
7. Use the DC 5V/600-750mA power adapter provided with the voice
amplifier to make sure the best performance.
8. Non professional technician is prohibited to open/modify/repair the
voice amplifier
Operation & Caution
User Manual
1
2
3
4
5
6
7
Frequency Response: 80Hz-12kHz
Output Power: 12W
Output Impedance: 4Ω
Operating Voltage: 3.7V
Battery specification: 3.7V/2000mAh lithium-ion battery
Power Adaptor: DC 5V/600-750mA
Recharging Period: 4-6hrs
Playtime: ≥20hrs
Dimension: 86×98×46mm
Net Weight: 350g
1
2
3
4
5
65
7
便携式扩音器 头戴麦克风
适配器 绑带 说明书
Standard Configuration
Application
Teaching, tour guiding, outdoor activity, selling, morning exercise,
entertainment, presentation.
Power switch with volume control: Turn the wheel ① to the left
until you hear a clicking sound”Di”, the amplifier is now
switched on and the power LED will light, turn left for louder
voice, turn right for lower voice until power off.
Power indicator: It will light green when the amplifier is power-
on. If the battery is low, it will turn red, please recharge the
battery in time.
Microphone input socket: insert the microphone Φ3.5mm plug
into this socket; do not point the microphone directly to
amplifier, or it will cause howling.
Line input socket: Plug signal such as DVD, MP3 into the LINE IN
socket with a Φ3.5mm audio cable, the amplifier will be used as
a speaker.
DC 5V/600-750mA power adaptor socket.
2
Recharging Indicator: Plug in the power adaptor into socket , the
indicator will light, indicating that the rechargeable battery is under
charging. The indicator will change from red to green when the
battery is fully charged.
Hanging buckle
Guangdong Takstar Electronic Co., Ltd.
Address: No.2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: [phone] Fax: [phone] Website: E-mail: [e-mail]