Tamarack Technologies Airetrak 1A ADVANTAGE User manual

The Aire rak 1A Advan age™ is a
microprocessor based imer and fan speed
con rol, con rolling ven ila ion 24 hours a
day, every day. The override swi ch provides
full speed opera ion: Press he override
swi ch o run he fan a
full speed for wen y
minu es, or press
i again o urn i off.
320 Main Street • Buzzards Bay, Ma 02532
508-759-4660 / 800-222-5932 / Fax [phone]
Advantage
TM
PRODUCT GUIDE
Fea ures a full func ion 24
hour clock display wi h independen fan
and fan ligh con rol. Can swi ch up o
3.0 amps and has a field replaceable
fuse. Choose from a wide range of
programming capabili ies. Your
program is main ained in
he even of a power
ou age and carries a
one year warran y.
ADVANTAGE
Airetrak 1A
Patented
ETL Listed
™
1A

Specifications
Fan/Light
button adjusts
time up
OVR: Override Button - Determines how
long fan will run at full speed when
either Fan/Light or Fan Only is pressed.
DC: Duty Cycle Button - Determines
how many minutes of each hour
the Advantage will operate the fan.
Set in 5 minute intervals.
SS: Speed Set - Determines the
speed at which the fan operates.
TS: Time Set - Determines
how many hours each day
the Advantage will operate
the fan, either 12 or 24 hours.
Fan Only
button adjusts
time down
Power
Patented
UL Listed
1. To set the clock: Push the Power button. Hold both the Fan/Light
and Fan Onl buttons down until the LCD starts flashing (about 5
seconds). The Fan/Light button will adjust the time up. The Fan Onl
button will adjust the time down (holding either of these buttons
down will adjust the time more quickly). After the time is set, push
the Power button again. this will set the time into memory.
2. To program the Time Set (TS): This determines how many hours
each day the Advantage will operate the fan, either 24 hours or
12 hours. The 12 hour period is from 6PM to 6AM.
Push the Power button again. Push the button marked TS
the display will show 24 or 12.. To change the setting, push the
Fan/Light or Fan Onl button to shift from 24 to 12.
3. To program the Speed Set (SS): This determines the speed at
which the fan will operate. 1 is full speed. As you go higher in
number, the fan speed will be lower. Push the button marked SS
twice. The display will show 1-12. To change the speed, push the
Fan/Light or Fan Onl button to set your number.
4. To program the Dut C cle (DC): This determines how many
minutes of each hour the Advantage will operate the fan. The
time is in 5 minute intervals. Push the button marked DC twice.
The display will show 5, 10, 15 minutes etc. To change, push the
Fan/Light or Fan Onl button to set the run time.
5. To program the Override (OVR): This determines how long the fan
will run at full speed when either the Fan/Light or Fan Onl button is
pressed. 1 is continuous, 2 is 20 minutes and 3 is 40 minutes run
time. Push the button marked OVR twice. The display will show 1,
2 or 3. To change the override, push the Fan/Light or Fan Onl
button. The programming is now complete. the display will flash
for 15 seconds, then return to the clock display.
• The program will now run the fan at the top of the hour at the
speed and duration you have set.
• In the event of a power outage, the program will not be lost,
although the clock will need to be reset.
To avoid having the Fan or Light time out, restart the timer by
pushing the Fan/Light button again.
If you just want to leave the fan running for the 20 or 40 minutes
Override when exiting the bathroom, the Fan Onl button
must be pushed.
Programming the
Airetrak 1A Ad antage™
Advantage
TM
320 Main Street • Buzzards Bay, Ma 02532
508-759-4660 / 800-222-5932 / Fax [phone]
LIMITED WARRA TY IF, WITHI THE PERIOD OF O E YEAR FROM DATE OF PURCHASE THE AIRETRAK1A ADVA TAGE™ (THE PRODUCT) IS
DEFECTIVE OR MALFU CTIO S I ORMAL HOME USE, TAMARACK WILL REPAIR OR REPLACE THE product AT ITS DISCRETIO WITHOUT
CHARGE FOR LABOR OR MATERIALS. CUSTOMER IS RESPO SIBLE FOR SHIPPI G CHARGES.
CO DITIO S, EXCLUSIO S, A D LIMITATIO S -THIS WARRA TY IS SUBJECT TO THE FOLLOWI G CO DITIO S, EXCLUSIO S A D
LIMITATIO S. THIS WARRA TY DOES OT COVER PROBLEMS RESULTI G FROM I STALLATIO , OPERATIO OR MAI TE A CE THAT HAS
BEE U DERTAKE OTHER THA I ACCORDA CE WITH THE I STRUCTIO S. THIS WARRA TY DOES OT COVER PROBLEMS RESULTI G
FROM DEFECTS I OR CAUSED BY ASSOCIATED EQUIPME T (FUR ACES, SOLARIA, ETC.) ; FROM REPAIRS OR MODIFICATIO S ATTEMPTED
BY PERSO S OTHER THA TAMARACK.; FROM ABUSE, ACCIDE TAL OR SHIPPI G DAMAGE, ACTS OF GOD. THIS WARRA TY DOES OT
APPLY TO THE PRODUCT USED OUTSIDE THE U ITED STATES, ITS TERRITORIAL POSSESSIO S A D CA ADA. EXCEPT AS SET FORTH ABOVE,
O EXPRESS OR IMPLIED WARRA TY IS GIVE OR AUTHORIZED BY TAMARACK. A D ALL OTHER SUCH WARRA TIES ARE EXPRESSLY DIS-
CLAIMED. A Y WARRA TY OR MERCHA TABILITY OF FIT ESS FOR A Y PARTICULAR PURPOSE SHALL BE LIMITED TO THE WARRA TY HERE-
U DER. MOREOVER, A Y LIABILITY OF TAMARACK FOR THE PRODUCT SHALL BE LIMITED TO THE REPLACEME T OF THE PRODUCT. I O
EVE T SHALL TAMARACK BE LIABLE FOR A Y I CIDE TAL DAMAGES OR FOR A Y CO SEQUE TIAL PROPERTY OR COMMERCIAL DAMAGES,
IRRESPECTIVE OF THE CAUSE THEREOF, OCCURRI G EITHER DURI G OR AFTER THE WARRA TY PERIOD. I CLUDI G WITHOUT LIMITATIO
A Y DAMAGE TO A Y PART OF A BUILDI G OR ITS CO TE TS. OTE: SOME STATES DO OT ALLOW THE EXCLUSIO OR LIMITATIO OF I CI-
DE TAL OR CO SEQUE TIAL DAMAGES A D SOME STATES DO OT ALLOW LIMITATIO S O HOW LO G A IMPLIED WARRA TY LASTS, SO
THE ABOVE LIMITATIO S OR EXCLUSIO S MAY OT APPLY TO YOU. THIS WARRA TY GIVES YOU SPECIFIC LEGAL RIGHTS A D YOU MAY ALSO
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
PROOF OF PURCHASE REQUIRED.
Intended for installation in either a metal outlet box or a plastic outlet box. CAUTIO : DO OT USE THIS CO TROL
I A I SULATED WALL (ATTE TIO : E PAS UTILISER CETTE COMMA DE DA S U MUR ISOLE.)
P/ AA.2
Input . . . . . . . . . . . . . . . . . . . . . . .120 VAC 60 Hz
Maximum Power Output . . . . . . .300 Watts
Dimensions
Mounting Flange . . . . . . . .4 1/8” x 1 3/4”
Housing . . . . . . . . .2 3/4” x 1 3/4”x1 5/8”
WARNING: State and lo al ele tri al odes may require that the
Airetrak1A Advantage™ be installed by a li ensed ele tri ian, he k
with your lo al ode offi ials before installing. Some ventilation equip-
ment should not be used with a solid state speed ontrol. Please he k
with the manufa turer. Intended for use with GFCI ir uits ONLY.
ote: For Fans without a Light, cap the BLACK wire at the
Airetrak1A Advantage. Intended for use with GFCI circuits O LY.
1A