
USB-C 
ALT-MODE 
TRAVEL DOCK 
WITH PD PASS 
THRU
QUICK START GUIDE
410-3698-001A / DOCK412USZ
Docking Station Diagram Specifications
Windows Setup
To ensure the best Windows performance, please be sure to update your 
host PC BIOS (Firmware), display adapter driver. Using the Windows 
Control Panel Display Screen Resolution window, the connected monitors 
can be configured to either mirror your main screen, or extend the Windows 
desktop allowing visibility of more applications at the same time.
Screen Resolution window allows full configuration of all displays monitors, 
including:
• Display orientation and location modification
• Layout of displays
• Resolution up to 
 Single display mode:
 - mDP, HDMI : 4096 x 2160 p30 
 - VGA : 1920 x 1080
 
OS-X Setup
Macbook users can use the System Preferences for Displays to adjust the 
external monitors. OS-X allows configuration of all displays, including:
• Resolution up to 
 Single display mode:
 - mDP, HDMI : 4096 x 2160 p30 
 - VGA : 1920 x 1080
• Display orientation and location modification
• Layout of displays
Lock Slot
Gigabit 
Ethernet
USB-C 
USB-C 
HDMIVGA Mini DP
USB 3.0 USB 3.0
Contents
• USB-C Alt-mode Travel Dock with 
PD Pass Thru
System Requirements
Hardware
• USB-C enabled laptop with supporting DisplayPort Alternative Mode
Operating System (any of the following)
• Microsoft Windows®10 (32/64-bit)
• Mac OS ®X v10.11 or later
Visit www.targus.com for a list of the latest compatible 
operating systems
• Single display mode supporting either ofthe following:
 - mDP (4096 x 2160 p30 max)
 - HDMI (4096 x 2160 p30 max)
 - VGA (1920 x 1200)
• USB-C upstream cable (Laptop charging capable by PD pass through)
• 2 x USB 3.1 Gen 1 type A downstream port
• 1 x USB-C PD pass through port with USB 3.1 Gen 1 downstream data 
support
• Gigabit Ethernet
• Kensington Lock Slot
Features and specifications are subject to change without notice. Microsoft 
and Windows are registered trademarks of Microsoft Corporation in the United 
States and/or other countries. All trademarks and registered trademarks are 
the property of their respective owners. ©2017 Targus, 1211 North Miller 
Street, Anaheim, CA 92806 
Three Year Warranty
Declaration of Conformity
Regulatory Compliance
Product Registration
FCC Statement (Tested to Comply)
Targus recommends that you register your Targus accessory shortly after 
purchasing it. Go to:
http://targus.com/us/product_registration 
You will need to provide your full name, email address, country of residence 
and product information.
We pride ourselves on the quality of our products. For complete warranty 
details and a list of our worldwide offices, please visit www.targus.com. 
Targus product warranty does not cover any device or product that is not 
manufactured by Targus (including, but not limited to, laptops, smartphones, 
devices, or any other product that may be used in connection with the Targus 
product). Australian customers: For complete warranty details see warranty 
statement enclosed.
Targus is a registered trademark of Targus International LLC in the US and in 
certain other countries. Microsoft, Windows and Windows Vista are 
registered trademarks or trademarks of Microsoft Corporation in the United 
States and/or other countries. Mac is a trademark of Apple Inc., registered in 
the U.S. and other countries. USB Type-C is a trademark of USB 
Implementers Forum, Inc. HDMI is a registered trademark of HDMI Licensing, 
L.L.C. Corporation Delaware. All logos and registered trademarks are the 
property of their respective owners. ©2017 Targus, 1211 North Miller Street, 
Anaheim, CA 92806. All rights reserved. 
AUSTRALIAN AND NEW ZEALAND CONSUMERS ONLY
Thank you for your purchase. Targus warrants to the original purchaser that its 
products are free from defects in materials and workmanship, during the 
specified warranty period, and lasts as long as the original purchaser owns 
the product. The warranty period is stated on the packaging or in the 
documentation provided with this Targus product. Targus’ Limited Product 
Warranty excludes damage caused by accident, neglect, abuse, misuse, 
improper care, normal wear and tear, ownership transfer, or alteration. The 
limited warranty also excludes any product that is not manufactured by Targus 
(including, without limitation, laptops, smartphones, devices, tablets, or any 
other non-Targus item) that is used in connection with the Targus product. 
In the event that the Targus product has a defect in materials or workmanship 
Targus will, after receiving a warranty claim and inspecting the product, at its 
discretion, do one of the following: repair, replace, or refund with the same or 
a similar product (or part) of no lesser quality and ship it to the original 
purchaser at Targus’ expense. As part of this inspection, proof of purchase will 
be required. There is no charge for inspection. To make a warranty claim, 
please contact Targus Australia or New Zealand (see details below), or return 
the product to the place of purchase. The original purchaser must bear the 
cost of the delivery to Targus. 
Under Australian and/or New Zealand Consumer Laws, in addition to any 
warranty Targus gives, our products come with guarantees that cannot be 
excluded. You are entitled to a replacement or refund for a major failure and 
compensation for any other reasonably foreseeable loss or damage. You are 
entitled to have the products repaired or replaced if they fail to be of 
acceptable quality and the failure does not amount to a major failure. 
For any warranty question, contact Targus Australia Pty. Ltd. (i) by mail at 
Suite 2, Level 8, 5 Rider Boulevard, Rhodes NSW 2138, by phone AUS 
1800 641 645 or NZ 0800 633 222 or by Email: infoaust@targus.com. For 
additional information, check out our website at targus.com/au/warranty. 
This device complies with Part 15 of the FCC Rules. Operation is subject to 
the following two conditions: (1) This device may not cause harmful 
interference, and (2) This device must accept any interference received, 
including interference that may cause undesired operations.
This device complies with Part 15 of the FCC Rules. Operation is subject to 
the following two conditions: 
This device may not cause harmful interference, and 
This device must accept any interference received, including interference that 
may cause undesired operation. 
Warning: Changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate the 
equipment. 
NOTE: This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment o and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
. Reorient or relocate the receiving antenna. 
. Increase the separation between the equipment and receiver. 
. Connect the equipment into an outlet on a circuit dierent from that to which 
 the receiver is connected. 
. Consult the dealer or an experienced radio/TV technician for help. 
Hereby, Targus declares that this device is in compliance with the essential 
requirements and other relevant provisions of Directive: 2014/30/EU.
Technical Support
For technical questions, please visit:
US 
Australia 
 
 
New Zealand 
Internet: http://targus.com/us/support 
Internet: http://www.targus.com/au/support 
Telephone: 1800-641-645
Telephone: 0800-633-222