Targus CHILL HUB XC User manual

User Guide
410-1824-001C / AWE01US AWE20US
N2953
1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of
our products. For complete warranty details and a list of our worldwide
ofces, please visit www.targus.com. Features and specications are
subject to change without notice. Microsoft, Windows and Windows Vista
are registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. Mac is a trademark of Apple Inc.,
registered in the U.S. and other countries. All trademarks and registered
trademarks are the property of their respective owners. ©2010 Targus
Group International, Inc. All rights reserved.
NOTEBOOK COOLING
CHILL HUB XC

Targus Notetbook Cooling Chill Hub XC
2
Targus Notetbook Cooling Chill Hub XC
3
Congratulations on your purchase of the Targus Notebook Cooling Chill
Hub XC. This cooling device dissipates thermal heat, reducing your
computer’s overall temperature, resulting in maximum performance. It
also allows you to connect through a single USB connection up to 4 USB
devices. Its thin yet durable design is both portable and sturdy.
System Requirements
• USB 1.1/2.0 compliant port
To use the Chill Hub
1. Remove the USB cable from the bottom of the Chill Hub.
2. Decide on where you want to place the Chill Mat, either on a work
surface, such as a table or desktop, or your lap. If you choose to use
the Chill Mat on a work surface, you can extend the feet to the required
angle.
3. Place the Chill Mat on the work surface or your lap.
4. Position your laptop computer on top of the Chill Hub.
Introduction 5. If you have purchased the optional AC power adapter, connect one end
into the Chill Hub’s DC port and the other end into the power outlet.
6. Connect one end of the USB cable into the mini-B USB port located at
the rear of the Chill Hub.
7. Connect the other end of the USB cable into an available USB port on
your laptop computer.
8. Turn the fan on by sliding the Power switch to “I” for low speed fan and
“II” for high speed fan.
9. To connect a USB device to the Chill Hub, plug the USB cable from the
device into an available port on the Chill Hub.
1
2

Targus Notetbook Cooling Chill Hub XC
4
Targus Notetbook Cooling Chill Hub XC
5
NOTE: If there’s insufficient power after connecting USB devices to the Chill Hub,
you may purchase and use the separately sold AC Adapter (Targus model number
APA09USZ) on www.targus.com to provide more power to the USB devices.
WARNING: Keep all items, such as loose clothing and jewelry, and long hair away
from the fans to avoid possible personal injury or damage to the Chill Hub or
your computer.
Technical Support
For technical questions, please visit:
Product Registration
Targus recommends that you register your Targus accessory
shortly after purchasing it. Go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of
residence and product information.
Warranty
Targus warrants this product to be free from defects in materials
and workmanship for one year. If your Targus accessory is found
to be defective within that time, we will promptly repair or replace
it. This warranty does not cover accidental damage, wear and tear,
or consequential or incidental loss. Under no conditions is Targus
liable for loss of, or damage to devices; nor loss of, or damage to,
programs, records, or data; nor any consequential or incidental
damages, even if Targus has been informed of their possibility. This
warranty does not affect your statutory rights.
US Internet: www.targus.com/support.asp
Australia Internet: www.targus.com/au
Email: [email protected]
Telephone: [phone]
New Zealand Telephone: [phone]
8
0 I II
DC port
Mini-B USB port
USB port Power switch
9
6
7
Laptop
(not included)
3
5
AC adapter
(not included)

Targus Notetbook Cooling Chill Hub XC
6
Targus Notetbook Cooling Chill Hub XC
7
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive
1999/5/EC.
Microsoft, Windows, and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. All
trademarks and registered trademarks are the property of their respective owners.
All rights reserved. Features and specications are subject to change without notice.
© 2010. Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not authorized by the party responsible
for compliance could void the user’s authority to operate this
product.