Targus PAWM004E User manual

USER GUIDE
wireless
optical
notebook
mouse

2
INTRODUCTION................................ 6
Installing the Batteries . . . . . . . . . . . . . . . . . . 7
Connecting the Receiver . . . . . . . . . . . . . . . . 8
Setting the Identification Code . . . . . . . . . . . 9
Power Management . . . . . . . . . . . . . . . . . . . . 9
Operating Hints . . . . . . . . . . . . . . . . . . . . . . 10
Things to Remember . . . . . . . . . . . . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 13
Technical Support . . . . . . . . . . . . . . . . . . . . 14
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EINFÜHRUNG.................................17
Einlegen der Batterien . . . . . . . . . . . . . . . . . 18
Der Anschluss des Empfängers . . . . . . . . . 19
Einstellen des Identifikationscodes . . . . . . 20
Energie Einsparung . . . . . . . . . . . . . . . . . . . 20
Hinweise zum Betrieb . . . . . . . . . . . . . . . . . 21
Wichtige Hinweise . . . . . . . . . . . . . . . . . . . . 23
Fehlersuche und -behebung . . . . . . . . . . . . 24
Technische Unterstützung . . . . . . . . . . . . . . 25
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3
INTRODUCCIÓN..............................29
Instalación del Baterías . . . . . . . . . . . . . . . . 30
Cómo conectar el receptor . . . . . . . . . . . . . 32
Programación del código de identificación 33
Administración de la energía . . . . . . . . . . . . 34
Consejos de funcionamiento . . . . . . . . . . . 34
Cosas para recordar . . . . . . . . . . . . . . . . . . 36
Solución de problemas . . . . . . . . . . . . . . . . 37
Soporte técnico . . . . . . . . . . . . . . . . . . . . . . 38
Garantía . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
INTRODUCTION..............................41
Installation des piles . . . . . . . . . . . . . . . . . . . 42
Branchement du récepteur . . . . . . . . . . . . . 43
Réglage du code d’identification . . . . . . . . 44
Gestion du courant . . . . . . . . . . . . . . . . . . . 45
Conseils d'utilisation . . . . . . . . . . . . . . . . . . 45
Remarques importantes . . . . . . . . . . . . . . . 47
Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Support technique . . . . . . . . . . . . . . . . . . . . 50
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

4
I NT RO DU ZI ON E. .. .. .. ... .. .. .. .. .. .. ... .. .. . 5 3
Installazione delle Batterie . . . . . . . . . . . . . . 54
Collegare il ricevitore . . . . . . . . . . . . . . . . . . 55
Impostazione del codice di riconoscimento 56
Controllo consumo . . . . . . . . . . . . . . . . . . . 57
Suggerimenti per l'uso . . . . . . . . . . . . . . . . . 57
Cose da non dimenticare . . . . . . . . . . . . . . 58
Localizzazione e soluzione dei problemi . . . 60
Assistenza tecnica . . . . . . . . . . . . . . . . . . . . 61
Garanzia . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
INLEIDIN G.............. .. ............. .. .. .. ...64
De Batterijen Installeren . . . . . . . . . . . . . . . 65
Aansluiting van de ontvanger . . . . . . . . . . . 66
De identificatiecode instellen . . . . . . . . . . . 67
Energiebesparing . . . . . . . . . . . . . . . . . . . . . 68
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Zuinig Energieverbruik . . . . . . . . . . . . . . . . . 70
Probleemoplossing . . . . . . . . . . . . . . . . . . . . 70
Technische ondersteuning . . . . . . . . . . . . . 72
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

5
IN TR ODU ÇÃ O.............. .. .. .. .. .. ......... 75
Instalar os Pilhas . . . . . . . . . . . . . . . . . . . . . 76
Conexão do Receptor . . . . . . . . . . . . . . . . . 77
Definir o Código de Identificação . . . . . . . . 77
Gestão da energia . . . . . . . . . . . . . . . . . . . . 78
Sugestões de funcionamento . . . . . . . . . . . 79
Pontos importantes . . . . . . . . . . . . . . . . . . . 80
Resolução de Problemas . . . . . . . . . . . . . . 81
Assistência Técnica . . . . . . . . . . . . . . . . . . . 83
Garantia . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

6
Introduction
Contents
TARGUS WIRELESS
OPTICAL
NOTEBOOK MOUSE
Congratulations on your purchase of the Targus wireless
optical notebook mouse. This mouse offers the latest
technology for interference free operation with 27 MHz
wireless connection and 4,096 IDs per channel. The mouse
features an on/off switch and auto power saving manage-
ment for effective power conservation.This user’s guide
describes how to connect the receiver to your
computer,install default software drivers and setup the radio
link.
› Targus wireless optical notebook mouse
› USB receiver
› USB extension cable
› 2 x AAA batteries
› Carrying pouch

7
System Requirements
To use the mouse your computer must meet the following
hardware requirements and run one of the operating
systems listed below.
Hardware
• PC with an Intel®Pentium® processor or equivalent
• USB 1.1 interface
Operating System
• Windows ®98SE/Me/2000/XP
NOTE: The third button and the scrolling wheel of
the mouse only work with the operating systems listed
above. If you use the mouse with a different operating
system, it will lose its enhanced features and function
as a standard, two-button mouse.
Installing the Batteries
1 Remove the battery cover from the top of the mouse by
pressing the top center (over the Targus logo) and
sliding it back.
Removing the battery cover
2 Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends of each battery match
the polarity indicators inside the battery housing.
Targuswirelessopticalnotebookmouse
• Windows Vista™

8
WARNINGS: When replacing the batteries, you may use
alkaline or other heavy-duty NiMH batteries. Never
combine an alkaline with a NiMH battery in a device.
Avoid mixing new and used batteries in a device.
3 Slide the battery cover back in to position until it “clicks”
firmly into place.
4 Turn on the mouse by sliding the on/off switch on the
bottom of the mouse to the “on” position.
The optical sensor, located on the bottom of the mouse,
glows red.
Connecting the Receiver
To connect the receiver:
1 Plug the USB receiver into an available USB port on
your computer.
2 Follow any on-screen instructions to complete the
default driver installation.
The “Lock LED” light turns on.
You are now ready to set the identification code to establish
a communication link with the receiver.
LOCK LED
SETUP KEY
Targuswirelessopticalnotebookmouse

9
Targuswirelessopticalnotebookmouse
Setting the Identification Code
After your computer detects the USB receiver and the
driver software is installed, you must set the ID code
between the receiver and the mouse BEFORE you can use
it. To do this:
NOTE: Make sure that your computer is turned on and
has detected the USB receiver before you set the ID
code.
1 Press and release the setup key on the receiver. The
Lock LED light turns off.
2 Press the setup key on the bottom of the mouse.
When the LED on the receiver is lit, the mouse is set up
with an ID and the receiver is locked.
You are now ready to use the mouse.
Power Management
• To power the mouse on and off, slide the on/off switch to
the desired position.
Power switch
Setup Key

10
Targuswirelessopticalnotebookmouse
• When power is on, the mouse goes into “power saving
mode” after 4 minutes of inactivity. To activate the mouse,
move the mouse or press any button.
• To save battery power, turn off the mouse while travelling
or when you’re not using it.
CAUTION: Removing the batteries will require you to
reset the ID code.
Operating Hints
For optimal performance and RF reception:
• Place the receiver at least 20 cm away from all electrical
devices, such as your monitor, speakers or external
storage devices.
• If necessary, use the supplied extension cable to keep the
receiver away from the computer. Plug the receiver into
the extension cable, and the extension cable to the
computer.
• Avoid using the optical mouse on a metal surface. Metals,
such as iron, aluminum or copper, shield the radio
frequency transmission and may slow down the mouse’s
response time or cause the mouse to fail temporarily.
• The mouse will enter a suspend mode at the same time
your computer does. To activate the mouse, press any of
the buttons.
• If your computer has a metal case that contains aluminum
or magnesium, use the optical mouse to the side. The
display panel may interfere with the radio frequency signal
if you use the mouse directly in front of the computer.
• Never use the optical mouse on a glass or mirrored
surface as these surfaces will cause the mouse to fail
temporarily.