Tascam Portacapture X6 User manual

D01405020A
Linear PCM Recorder
Reference Manual

2TASCAM Portacapture X6
Contents
1 - Introduction...................................................................................... 4
1 - 1 Features................................................................................................................4
1 - 2 Conventions used in this manual ...............................................................4
1 - 3 Trademarks and copyrights ..........................................................................5
1 - 4 microSD cards....................................................................................................5
Precautions for use..............................................................................................5
Note about formatting.......................................................................................5
1 - 5 Accessories sold separately ..........................................................................6
USB cables (for communication or data transmission) ..........................6
PS-P520U AC adapter .........................................................................................6
AK-BT1 Bluetooth adapter................................................................................6
2 - Names and functions of parts ......................................................... 7
2 - 1 Front ......................................................................................................................7
2 - 2 Bottom..................................................................................................................7
2 - 3 Left side................................................................................................................8
2 - 4 Right side.............................................................................................................8
2 - 5 Bottom..................................................................................................................8
2 - 6 Using the wheel ................................................................................................9
2 - 7 Using the touchscreen....................................................................................9
Basic screen operations .....................................................................................9
2 - 8 App overview.....................................................................................................9
LAUNCHER screen................................................................................................9
Recording app signal flows ...........................................................................10
Recording app output files............................................................................11
Project status bar .............................................................................................. 12
Shortcut Menu ................................................................................................... 12
Character input.................................................................................................. 13
3 - Preparation ..................................................................................... 14
3 - 1 Inserting and removing microSD cards................................................. 14
Inserting microSD cards ................................................................................. 14
Removing microSD cards...............................................................................14
3 - 2 Preparing the power supply...................................................................... 14
Notes about power supplies.........................................................................14
Using AA batteries............................................................................................14
Using an AC adapter (sold separately) ......................................................15
Using USB bus power ...................................................................................... 15
3 - 3 Turning the power on and off................................................................... 16
Turning the power on......................................................................................16
Turning the unit off (putting it in standby)..............................................16
Resume function ............................................................................................... 16
Setting the language, date and time......................................................... 16
Formatting (initializing) microSD cards .................................................... 16
4 - Connections .................................................................................... 17
4 - 1 Connection examples ..................................................................................17
Using the MANUAL app.................................................................................. 17
Using the PODCAST app ................................................................................17
4 - 2 Setting the built-in mics.............................................................................. 17
4 - 3 Connecting external mics and other equipment .............................. 18
Connecting external mics..............................................................................18
Connecting mid-side mics............................................................................. 18
Connecting other equipment ......................................................................18
4 - 4 Connecting cameras .................................................................................... 18
Setting the output for camera use..............................................................18
4 - 5 Connecting monitoring equipment.......................................................19
4 - 6 Using the built-in speaker ..........................................................................19
4 - 7 Adjusting the playback volume ...............................................................19
4 - 8 Connecting computers and smartphones........................................... 19
5 - Input and output settings.............................................................. 20
5 - 1 Using the INPUT SELECT function ...........................................................20
5 - 2 Making input settings for each input.....................................................20
Using the STEREO LINK function ................................................................. 20
Setting recording input sources (INPUT).................................................. 20
Using phantom power (phantom voltage)..............................................20
Adjusting the input level automatically (AUTO GAIN)......................... 20
Setting the low-cut filter (LOW CUT)..........................................................21
Setting the noise gate (NOISE GATE) .........................................................21
Setting the limiter (LIMITER/COMP)........................................................... 21
Setting the equalizer (EQ).............................................................................. 21
Inverting the input phase (PHASE INVERT) ............................................. 21
Adjusting input gain (GAIN)..........................................................................22
Changing the input gain (GAIN).................................................................. 22
5 - 3 Adding reverb to inputs (REVERB)...........................................................22
5 - 4 Setting the phantom power voltage......................................................22
5 - 5 Setting plug-in power..................................................................................23
6 - Recording apps ............................................................................... 24
6 - 1 Recording app overview.............................................................................24
Recording pause function..............................................................................24
Recording operation flow..............................................................................24
6 - 2 Button operations during recording ...................................................... 25
6 - 3 Recording with the ASMR app.................................................................. 26
Screen overview ................................................................................................ 26
Shortcut Menu ................................................................................................... 26
Setting input levels...........................................................................................26
6 - 4 Recording with the MANUAL app ........................................................... 27
Recording guide function (MANUAL app only) .....................................27
Setting procedure.............................................................................................27
Screen overview ................................................................................................ 27
Shortcut Menu ................................................................................................... 27
Using the wheel.................................................................................................28
Setting input levels...........................................................................................28
Using the mixer..................................................................................................28
6 - 5 Recording with the MUSIC app ................................................................ 29
Screen overview ................................................................................................ 29
Shortcut Menu ................................................................................................... 29
Selecting the type of instrument to record.............................................29
Setting the input level.....................................................................................29
Adding reverb to the input (REVERB).........................................................29
6 - 6 Recording with the VOICE app .................................................................30
Screen overview ................................................................................................ 30
Shortcut Menu ................................................................................................... 30
Setting the inputs ............................................................................................. 30
Setting the input level.....................................................................................30
6 - 7 Recording with the FIELD app.................................................................. 31
Screen overview ................................................................................................ 31
Shortcut Menu ................................................................................................... 31
Setting the inputs ............................................................................................. 31
Selecting the recording subject...................................................................31
Setting the input level.....................................................................................31
Setting the filter (LOW CUT)..........................................................................31
6 - 8 Recording with the PODCAST app..........................................................32
Screen overview ................................................................................................ 32
Shortcut Menu ................................................................................................... 32
Using the wheel.................................................................................................32
Setting input levels...........................................................................................32
Using the mixer..................................................................................................32
Making sound pad settings...........................................................................32
Playing effect sounds during recording ...................................................33
Muting mics ........................................................................................................ 33
Starting playback .............................................................................................. 33
7 - Recording settings ......................................................................... 34
7 - 1 Monitoring individual inputs (solo monitoring) ................................ 34
7 - 2 Changing the recording file format........................................................ 34
7 - 3 Recording in mono ....................................................................................... 34
7 - 4 Pausing during recording (REC PAUSE) ................................................. 34
7 - 5 Starting recording automatically (AUTO REC)..................................... 34
7 - 6 Recording with two settings at the same time (DUAL REC)...........35
7 - 7 Capturing a few seconds before starting recording (PRE REC).....35
7 - 8 Adjusting input levels automatically (AUTO GAIN)........................... 35
7 - 9 Recording file naming ................................................................................. 35

TASCAM Portacapture X6 3
Contents
7 - 10 Designating the folder use for recordings.........................................35
7 - 11 Changing files while continuing to record
(file incrementation function) .................................................................35
Automatic ............................................................................................................35
Manual ..................................................................................................................35
7 - 12 Punch in/out (MANUAL app only).........................................................35
Punching in and out.........................................................................................35
Undoing punching in and out (UNDO)..................................................... 36
Canceling UNDO operations (REDO) .........................................................36
7 - 13 Recording times (in hours: minutes).................................................... 36
8 - Playing files..................................................................................... 37
8 - 1 Opening the playback screen................................................................... 37
Screen overview ................................................................................................ 37
Playing and pausing.........................................................................................37
Stopping playback............................................................................................ 37
Changing the playback position ................................................................. 37
Selecting files for playback............................................................................ 37
Searching backward and forward...............................................................37
Adjusting the mix balance of the tracks................................................... 37
9 - File operations ................................................................................ 38
9 - 1 File name overview.......................................................................................38
Changing how files are named.................................................................... 40
Resetting the file number .............................................................................. 40
9 - 2 File and project structure overview........................................................ 40
Folders...................................................................................................................40
Recording data................................................................................................... 40
9 - 3 Folder hierarchy example........................................................................... 40
9 - 4 Project overview ............................................................................................ 41
9 - 5 Using the BROWSE screen..........................................................................41
9 - 6 Folder operations .......................................................................................... 41
Screen overview ................................................................................................ 41
Folder menu........................................................................................................ 41
Creating folders (NEW)....................................................................................41
Changing the names of folders (RENAME) ..............................................41
Deleting all files in a folder (ALL FILES DELETE) ..................................... 42
Deleting folders (FOLDER DELETE)............................................................. 42
9 - 7 File and project operations........................................................................42
File menu..............................................................................................................42
SELECT................................................................................................................... 42
Playing master files(PLAY)..............................................................................42
Viewing file details (FILE INFORMATION).................................................. 43
Deleting files and projects (FILE DELETE)................................................. 43
Deleting tracks in projects (TRACK DELETE)............................................43
Enabling and disabling protection (CHANGE PROTECT).................... 43
Changing names (RENAME).......................................................................... 43
Viewing the mark list (MARK) .......................................................................44
Dividing files (DIVIDE)...................................................................................... 44
Normalizing recordings (NORMALIZE)...................................................... 44
9 - 8 Setting where recording files are saved................................................ 44
10 - Mark functions ............................................................................. 45
10 - 1 Mark types ..................................................................................................... 45
10 - 2 Adding marks ............................................................................................... 45
Adding marks manually.................................................................................. 45
Adding marks automatically (AUTO MARK).............................................45
Adding marks when peak levels occur (PEAK MARK) .......................... 45
10 - 3 Deleting marks.............................................................................................45
Deleting all marks ............................................................................................. 45
10 - 4 Jumping to set marks (mark skipping)................................................45
10 - 5 Dividing files at every mark..................................................................... 45
10 - 6 Opening mark lists...................................................................................... 45
11 - Camera functions ......................................................................... 46
11 - 1 Setting the output for camera use........................................................46
11 - 2 Using the auto tone function (AUTO TONE)...................................... 46
Setting the AUTO TONE function ................................................................46
Adjusting the tone volume............................................................................46
12 - USB connection ............................................................................ 47
12 - 1 Connecting with computers ...................................................................47
12 - 2 Connecting with iOS devices..................................................................47
12 - 3 Accessing microSD cards from a computer.......................................47
Exchanging files with computers................................................................ 47
12 - 4 Using the ASIO driver ................................................................................47
12 - 5 Using as an audio interface ..................................................................... 47
Portacapture X6 USB audio channel assignments................................ 47
12 - 6 Using the unit as a USB mic.....................................................................48
Inputting sound to the computer using the unit inputs.................... 48
Using the computer output as sound input to this unit..................... 48
13 - Other functions and apps ............................................................ 49
13 - 1 Mix down function ..................................................................................... 49
13 - 2 Using the mid-side decoding function ...............................................49
Connection settings.........................................................................................49
Adjusting mid and side levels.......................................................................49
14 - Controller app............................................................................... 50
14 - 1 Installing the dedicated controller app ..............................................50
14 - 2 Connecting with this unit using Bluetooth ....................................... 50
14 - 3 Using the dedicated smartphone app ................................................ 50
15 - Various settings ............................................................................ 52
15 - 1 Adjusting gain differences between built-in mics
(mic trim function).......................................................................................52
15 - 2 XRI function overview ............................................................................... 52
15 - 3 Showing various information .................................................................52
15 - 4 Resetting the date and time ................................................................... 52
15 - 5 Resetting the language.............................................................................52
15 - 6 Resetting the unit to its factory defaults. ...........................................52
15 - 7 Formatting microSD cards....................................................................... 52
15 - 8 Using the automatic power saving function.....................................53
15 - 9 Selecting the power source.....................................................................53
15 - 10 Setting the AA battery type (BATTERY)............................................ 53
15 - 11 Power saving (energy conservation) mode .................................... 53
15 - 12 Adjusting the display contrast (CONTRAST)................................... 53
15 - 13 MENU ............................................................................................................ 54
GENERAL SETTINGS.......................................................................................... 54
INPUT SETTINGS ................................................................................................55
Mixer......................................................................................................................56
BROWSE................................................................................................................ 56
INPUT SELECT ..................................................................................................... 56
LAUNCHER...........................................................................................................56
16 - Messages....................................................................................... 57
17 - Troubleshooting........................................................................... 58
18 - Specifications ............................................................................... 60
18 - 1 Specifications and rated values .............................................................60
Recorder specifications...................................................................................60
Analog audio input ratings............................................................................60
Analog audio output .......................................................................................60
USB .........................................................................................................................60
USB audio............................................................................................................. 60
Bluetooth device connector .........................................................................60
Audio performance.......................................................................................... 60
Recording times (in hours: minutes).......................................................... 60
Operating system and other requirements.............................................61
Other...................................................................................................................... 61
18 - 2 Dimensional drawings ..............................................................................62
18 - 3 Block diagram............................................................................................... 63

4TASCAM Portacapture X6
1 - Introduction
1 - 1 Features
o The 2.4-inch color touchscreen, which makes the interface easy to
view, enables easy and intuitive operation.
o In addition to basic multitrack recording, apps are ready for a wide
range of recording applications, including podcasts, music, inter-
views, field recording and ASMR.
o With 2 lockable XLR input jacks, recording with multiple mic/line
inputs is possible. Separate phantom power (24V/48V) is supported
for each channel.
o The mic units use high-quality condenser mics.
o Switching between X-Y and A-B recording formats is possible by
rotating the mic units.
o Multitrack recording with 6 tracks (4 tracks and a stereo mix) is possi-
ble.
o Recording with resolutions up to 96kHz/32-bit float (floating-point
arithmetic) is supported. This enables audio editing using DAW soft-
ware without reducing the audio quality of the recorded data.
o Dual recording with different formats is possible for each input track.
o USB audio interface functions support 6 ins and 2 outs.
o By connecting an AK-BT1 Bluetooth adapter (sold separately), wire-
less remote control using a smartphone or tablet can be enabled.
o Recording functions include low-cut filter, compressor, limiter, auto-
matic gain control and noise gate.
o CAMERA and MIC/EXT IN jacks are built-in. These support output
from a camera of the sound it is recording, wireless mic receivers and
plug-in power mics, for example.
o The CAMERA/LINE output jack has an attenuation function and
allows audio output to cameras and other devices.
o Audio can be monitored using the headphone output or the built-in
speaker.
o Supports micro SD/micro SDHC/micro SDXC (up to 512GB) recording
media
o Equipped with a USB Type-C port that supports USB bus power Sup-
ports operation on USB bus power.
o Various mark and slate tone functions are available.
1 - 2 Conventions used in this manual
The following conventions are used in this manual.
o “microSD/microSDHC/microSDXC memory card” is sometimes abbre-
viated as“microSD card”.
o Smartphones, tablets and other devices connected to this unit using
Bluetooth are called“Bluetooth devices”.
o Files created during a single recording are referred to collectively as a
project.
o The project that is currently selected is called the“current project”.
o Information shown on a computer display is written like this: “OK”.
o References to“iOS”in this document also include “iPad OS”.
o As necessary, additional information is provided under TIP, NOTE and
CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special cases.
CAUTION
Failure to follow these instructions could result in damage to equip-
ment or lost data, for example.
VCAUTION
Failure to follow these instructions could result in injury.

TASCAM Portacapture X6 5
1 - Introduction
1 - 3 Trademarks and copyrights
o TASCAM is a registered trademark of TEAC Corporation.
o microSDXC Logo is a trademark of SD-3C, LLC.
o MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
o Supply of this product does not convey a license nor imply any right
to distribute MPEG Layer-3 compliant content created with this prod-
uct in revenue-generating broadcast systems (terrestrial, satellite,
cable and/or other distribution channels), streaming applications (via
Internet, intranets and/or other networks), other content distribution
systems (pay-audio or audio-on-demand applications and the like) or
on physical media (compact discs, digital versatile discs, semiconduc-
tor chips, hard drives, memory cards and the like). An independent
license for such use is required. For details, please visit http://mp3li-
censing. com.
o Microsoft and Windows are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other
countries.
o Apple, Mac, macOS, iOS, iPad, iPadOS and iTunes are trademarks of
Apple Inc. in the United States and other countries. The iPhone trade-
mark is used under license from Aiphone Co., Ltd.
o App Store is a service mark of Apple Inc.
o Lightning is a trademark of Apple Inc.
o IOS is a trademark or registered trademark of Cisco in the U.S. and
other countries and is used under license.
o Android and Google are trademarks of Google LLC.
o ASIO is a trademark and software of Steinberg Media Technologies
GmbH.
o Other company names, product names and logos in this document
are the trademarks or registered trademarks of their respective own-
ers.
Information is given about products in this manual only for the
purpose of example and does not indicate any guarantees against
infringements of third-party intellectual property rights and other
rights related to them. TEAC Corporation will bear no responsibil-
ity for infringements on third-party intellectual property rights or
their occurrence because of the use of these products.
Properties copyrighted by third parties cannot be used for any
purpose other than personal enjoyment and the like without the
permission of the right holders recognized by copyright law. Al-
ways use this equipment properly. TEAC Corporation will bear no
responsibility for rights infringements committed by users of this
product.
1 - 4 microSD cards
A microSD card is necessary to record and play files with this unit. Pre-
pare one for use.
This unit can use microSD cards that are Class 10 or higher and compatible
with microSD, microSDHC or microSDXC standards.
A list of microSD cards that have been confirmed for use with this unit
can be found on the TASCAM website (https://tascam.jp/int/product/
portacapture_x6/docs). You can also contact TASCAM customer support.
Precautions for use
microSD cards are delicate media.
In order to avoid damaging microSD cards, take the following precau-
tions when handling them.
o Do not leave them in extremely hot or cold places.
o Do not leave them in extremely humid places.
o Do not let them get wet.
o Do not put things on top of them or twist them.
o Do not hit them.
o Do not remove or insert them during recording, playback, data trans-
mission or other access.
o Always put memory cards in cases when transporting them.
Note about formatting
microSD cards formatted by this unit are optimized to improve perfor-
mance during recording. Use this unit to format the microSD cards to be
used with it. Errors might occur when recording with this unit using a
microSD card formatted by a computer or other device.

6TASCAM Portacapture X6
1 - Introduction
1 - 5 Accessories sold separately
This product does not include the following items.
Please purchase any that you need for your uses.
USB cables (for communication or data transmission)
A USB cable must be prepared to connect this unit to a computer (Win-
dows/Mac) or smartphone.
This unit has a USB Type-C port.
Prepare a USB cable suitable for the USB port of the computer or smart-
phone being used.
o USB cables designed only for charging cannot be used.
Connecting to an iOS device with a lightning port
A genuine Apple Lightning to USB Camera Adapter and a com-
mercially-available Type-A to Type-C cable are necessary.
Connecting to a computer or smartphone with a USB Type-C port
A commercially-available Type-C to Type-C cable is necessary.
Connecting to a smartphone with a USB micro-B port
A commercially-available micro-B to Type-C cable is necessary.
Connecting to a computer with a USB Type-A port
A commercially-available Type-A to Type-C cable is necessary.
PS-P520U AC adapter
This is necessary to operate this unit using AC power.
NOTE
This unit does not have a battery charging function when using an AC
adapter.
AK-BT1 Bluetooth adapter
This is necessary to control this unit from a smartphone or tablet using
Bluetooth connection.

TASCAM Portacapture X6 7
2 - Names and functions of parts
2 - 1 Front
1 Built-in mics (Input 1/2)
This is a stereo pair of electret condenser mics. They can be switched
between X-Y and A-B recording formats. (page 17)
2 y/9button
Press when stopped to start playback.
Press during playback to pause.
Press when a file is selected on the Browse Screen to play that file.
3HOME [8] button
Press during playback to stop playback and set the playback position
to the beginning of that file.
Press this when recording or paused to stop recording and return to
the HOME screen.
When the GENERAL SETTINGS screen is open, press this to return to
the LAUNCHER screen.
4 .//buttons
5 MENU (shortcuts) button
When stopped, this opens the Shortcut Menu on the Home Screen.
6Wheel
Use this make fine adjustments to mixer fader and input level set-
tings.
7Built-in speaker (mono)
Use this built-in speaker to listen to recordings.
Sound will not be output from the speaker in the following condi-
tions.
o GENERAL SETTINGS screen > I/O SETTINGS page > SPEAKER item
set to OFF
o When not playing back
o When headphones are connected
o When punching in/out
8Touchscreen
This shows a variety of information.
Tap it and swipe it to make settings and operate the unit. (page 9)
9REC [0] button
Press when stopped to start recording.
Press when recording to put the unit in recording standby.
The function changes according to the RECORDING GUIDE and REC
PAUSE settings. See“Recording operation flow” on page 24 for
details.
0MARK button
Press when recording or playing back to add marks manually.
2 - 2 Bottom
qTripod mounting threads (1/4-inch)
Use to attach this unit to a tripod.
CAUTION
o Ensure the tripod or mic stand screw is securely fastened to prevent
the unit from falling.
o When attaching this unit to a tripod or mic stand, be sure to place it
on a level surface.
o Some tripods have different screw specifications that make direct
connection impossible. Use a commercially-available adapter with
such tripods.
o Screws that are longer than 4.5 mm cannot be used for attachment.
wBattery compartment (AA batteries)
Install four AA batteries in this compartment to power the unit.

8TASCAM Portacapture X6
2 - Names and functions of parts
2 - 3 Left side
eInput jacks 3/4 (Inputs 3/4)
These analog inputs are balanced XLR jacks.
XLR (1: GND, 2: HOT, 3: COLD)
r MIC/EXT IN jack
Use a stereo mini jack cable to connect this to the line output jack
of an audio device, for example, or an external mic (3.5mm TRS) that
supports plug-in power.
tLINE OUT jack
Use this to connect with the line input jack of an amp or other equip-
ment.
y(headphone) jack
Connect headphones to this jack.
u(headphone/speaker) volume
Use this to adjust the volume output from the built-in speaker or the
(headphone) jack.
2 - 4 Right side
i ¤/HOLD switch
Slide this switch toward the ¤icon to turn the unit on and off
(put it into standby). Set it to the HOLD position to activate the hold
function. Neither the touchscreen nor any buttons can be used when
HOLD is active.
Even when HOLD is active, operation is possible using the remote
app (Portacapture Control).
VCAUTION
Before turning the unit on, lower the volumes of connected equip-
ment to their minimum levels.
Failure to do so might cause sudden loud noises, which could harm
hearing or result in other trouble.
oUSB Type-C port
Use a commercially-available USB cable to connect a computer or
smartphone. (page 19)
When using an AC adapter, connect it to this port. (page 15)
pmicroSD card slot
Insert microSD cards into this slot.
2 - 5 Bottom
a Bluetooth adapter connector
Connect an AK-BT1 Bluetooth adapter (sold separately) here.
sPEAK indicator
This lights when the input level exceeds the peak level.
dREC indicator
This blinks when in recording standby and lights when recording.

TASCAM Portacapture X6 9
2 - Names and functions of parts
2 - 6 Using the wheel
After tapping a fader or knob on the touchscreen, turn the wheel left or
right to change the setting precisely.
This is convenient for precise adjustments after making rough value
changes by sliding.
2 - 7 Using the touchscreen
Basic screen operations
Functions can be set and adjusted by tapping, swiping and sliding on
the touchscreen of this unit.
The first time the unit is started, after setting the language, date and time,
the LAUNCHER screen will open.
The LAUNCHER screen can be used to launch various recording apps and
setting screens.
Launching recording apps
As shown in the illustration below, slide the middle of the screen to
select an app to launch, and tap its icon to launch it.
Icon
App name
Returning to the LAUNCHER screen
1. Press the Shortcut Menu button at the bottom left of the unit.
2. Tap the LAUNCHER icon in the Shortcut Menu.
LAUNCHER
icon
Shortcut Menu
This reopens the LAUNCHER screen.
NOTE
When any app screen is open and the unit is stopped, press and
hold the HOME button to return to the LAUNCHER screen.
Switching screens
Tap the name of a screen on the right of the display to switch to it.
2 - 8 App overview
LAUNCHER screen
This can be used to launch recording apps and to open the GENERAL
SETTINGS screen.
To GENERAL
SETTINGS screen
Recording apps
Recording apps
The following apps for typical recording situations are available.
ASMR The screen effect changes in response to the input
sound in this recording app. (2-channel recording app)
VOICE This recording app is good for recording audio for inter-
views and video blogs. (2-channel recording app)
MUSIC This recording app is good for easily capturing instru-
mental and vocal performances. (2-channel recording
app)
MANUAL This is the basic app of the unit. This enables multitrack
recording of up to 4 channels.
FIELD This app is good for recording outdoors.
(2-channel recording app)
PODCAST This app is good for recording podcasts with up to 2
people.
Other apps
SD CARD READER This unit can be used as an SD card reader by con-
necting it to a computer with a USB cable.
BROWSE This can be used to select folders and files for play-
back, deletion and other operations.
NOTE
The designs and functions of apps and other features could change
with firmware updates.
GENERAL SETTINGS screen
Use this to make specific unit settings.
Tap the GENERAL SETTINGS icon at the bottom right of the LAUNCHER
screen.
e
LAUNCHER screen GENERAL SETTINGS screen
See “GENERAL SETTINGS”on page 54 for a list of setting items.

10 TASCAM Portacapture X6
2 - Names and functions of parts
Recording app signal flows
This unit is capable of multi-track recording with up to 6 tracks (4 tracks and a stereo mix). In each app, a maximum of 6 inputs can be assigned to up to 6 tracks.
Tracks 1–4 can be used in the MANUAL app, tracks 1–2 can be used in the PODCAST app, and tracks 1 and 2 can be used in 2-channel recording apps.
o The built-in mics and the MIC/EXT IN jack cannot be used at the same time.
MANUAL app
Input setting Input selection Mixer Master
Tracks 1/2
Tracks 3/4
♪
MASTER
Inputs
Built-in mics
MIC/EXT IN jack
Input jacks 3/4
or
USB Type-C port
ASMR app MUSIC app VOICE app FIELD app (2-channel recording apps)
♪
MASTER
Input setting Input selection Mixer Master
Tracks 1/2
Inputs
Built-in mics
MIC/EXT IN jack
Input jacks 3/4
or
USB Type-C port
PODCAST app
♪
MASTER
Input setting Input selection Mixer Master
Tracks 1/2
Inputs
Built-in mics
MIC/EXT IN jack
Input jacks 3/4
or
USB Type-C port

TASCAM Portacapture X6 11
2 - Names and functions of parts
Recording app output files
The types of files produced by recording depend on the app.
Apps capable of multi-track recording produce a master file as well as track files.
MANUAL app
♪

MASTER
Mixer Master
Tracks 1/2 (stereo/
mono)
Tracks 3/4 (stereo/
mono)
Track files Master files
ASMR app MUSIC app VOICE app FIELD app (2-channel recording apps)
♪
MASTER
Mixer Master
Tracks 1/2 (stereo/
mono)
Master files ASMR, MUSIC, FIELD: Stereo files
VOICE: Mono files
PODCAST app
Mixer Master
Tracks 1/2 (stereo/
mono)
Sound pads
Track files Master files
♪

MASTER
o The PODCAST app cannot use tracks 3–4.
Track files
These are mono recording files of audio from each track. Two tracks that are stereo-linked are recorded as single stereo files.
Master files
These files are recordings of the mixer output.

12 TASCAM Portacapture X6
2 - Names and functions of parts
Project status bar
When an app is launched, its HOME screen will show the status of the unit, the counter and other information.
In apps that have multiple screens, this data will be abbreviated on screens other than the HOME screen.
Tapping the project status bar on the HOME screen will show details.
Project status
bar
MANUAL recording app example
Showing details
Tap the project status bar to show additional details.
When additional details are shown, tap the file format area to restore the normal display.
Home Screen Home Screen
e
d
Normal display Detail display
Information shown
State Status icon Counter File format
Stopped 8File remaining time/recordable time According to recording
settings
Record pRecording time/recordable time According to recording
settings
Recording
paused p9 Recording time/recordable time According to recording settings
Playing files tPlayback position/remaining playback
time
According to the playback
file
Paused 9Playback position/remaining playback
time
According to the playback
file
Shortcut Menu
Tap the MENU button on the bottom left of the unit to show various menu shortcuts.
ASMR VOICE MUSIC MANUAL FIELD PODCAST
LAUNCHER LAUNCHER LAUNCHER LAUNCHER LAUNCHER LAUNCHER
BROWSE BROWSE BROWSE BROWSE BROWSE BROWSE
REC SETTINGS REC SETTINGS REC SETTINGS REC SETTINGS REC SETTINGS REC SETTINGS
INPUT SELECT INPUT SELECT INPUT SELECT INPUT SELECT INPUT SELECT INPUT SELECT
INPUT SETTINGS INPUT SETTINGS
RECORDING
GUIDE
MIX DOWN
PUNCH I/O
GENERAL SET-
TINGS
GENERAL SET-
TINGS
GENERAL SET-
TINGS
GENERAL SET-
TINGS
GENERAL SET-
TINGS
GENERAL SET-
TINGS

TASCAM Portacapture X6 13
Character input
Tap an item for character input to open the character input screen.
The following example shows the character input screen opened from the GENERAL SETTINGS screen > SYSTEM page > FILE NAME > WORD EDIT item.
Shift Delete one char-
acter
Switch input char-
acter type
Press the character type key to switch between letters of the English alphabet and numbers/symbols.
2 - Names and functions of parts

14 TASCAM Portacapture X6
3 - Preparation
3 - 1 Inserting and removing microSD cards
Inserting microSD cards
Insert a microSD card into the microSD card slot on the right side to
enable playback and recording by this unit.
NOTE
microSD cards can be inserted when the unit is on or off.
1. Open the microSD slot cover.
2. Insert the microSD card label side up.
3. Close the microSD slot cover.
Removing microSD cards
Turn the unit off or stop operation before removing a microSD card.
VCAUTION
Never remove a microSD card when the unit is operating (including
recording, playing back, or writing data to the microSD card). Doing
so could cause proper recording to fail, data to be lost, and sudden
loud noises from monitoring equipment, which might damage the
equipment, harm hearing or cause other trouble.
1. Press the microSD card in gently and then release it to allow it to
come out.
2. Pull the microSD card out.
3 - 2 Preparing the power supply
Notes about power supplies
This unit can be powered by 4 AA batteries, a TASCAM PS-P520U AC
adapter (sold separately) or a commercially-available USB cable (USB bus
power).
Alkaline, Ni-MH or lithium AA batteries can be used.
NOTE
This unit does not have a battery charging function when using an AC
adapter.
Using AA batteries
1. Remove the battery compartment cover, and install 4 AA batteries
with their ¥and ^marks as shown in the battery compartment.
2. Reattach the battery compartment cover.
Set the type of battery in order to show the amount of power remaining
and allow the unit to determine whether enough power is available
for proper operation. (“Setting the AA battery type (BATTERY)” on page
53)
NOTE
o The included alkaline batteries are for confirming operation of the
unit. For this reason, they might not last very long.
o When using dry cell batteries, the potential operation time will vary
according to the environmental temperature and operating condi-
tions.
For continuous operation over a long time, we recommend using an
AC adapter or other external power supply.

TASCAM Portacapture X6 15
3 - Preparation
Using an AC adapter (sold separately)
Connect a PS-P520U AC adapter (sold separately) to the unit's USB port.
AC outlet
USB-C plug
TASCAM PS-P520U (sold separately)
Type-A to Type-C cable
included with PS-P520U
CAUTION
o We highly recommend using the AC adapter designed for use with
this unit (PS-P520U sold separately). When using another external
power supply device, use one with the following specifications.
o Supplied voltage: 5 V
o Supplied current: 1.5A or more
Using a power supply device with specifications other than the above
could cause malfunction, overheating, fire or other problems.
If trouble should occur, stop using the unit and contact the retailer
where you purchased it or a TEAC service center to request repair.
o Noise may occur when recording with a microphone if the unit is
too close to the AC adapter. In such a case, keep sufficient distance
between the AC adapter and the unit.
NOTE
o If the supplied current of the external power supply cannot automat-
ically be determined, a power supply current confirmation pop-up
will appear.
If the power supply current is less than 1.5 A, the POWER SAVE MODE
will be enabled, restricting some functions.
(“Power saving (energy conservation) mode” on page 53)
o If the POWER SOURCE SELECT setting is AUTO, power will be supplied
from the external source when both that source and batteries are
available.
Using USB bus power
Use the supplied USB cable to connect the unit and the computer as
illustrated below.
ComputerUSB cable
USB Type-C port
NOTE
o If a computer is going to be used only to supply power, a driver does
not need to be installed.
o We recommend connecting it to a USB Type-C port on a computer or
other device.
o If the current supplied by USB cannot automatically be determined, a
power supply current confirmation pop-up will appear.
If the power supply current is less than 1.5 A, the POWER SAVE MODE
will be enabled, restricting some functions.
(“Power saving (energy conservation) mode” on page 53)

16 TASCAM Portacapture X6
3 - Preparation
3 - 3 Turning the power on and off
CAUTION
Turn down the volume of the sound system connected to the unit
before starting up or shutting down the unit.
Do not wear connected headphones when turning the unit on and
off. Noise could damage the headphone driver unit or harm your
hearing.
Turning the power on
Slide the ¤/HOLD switch toward ¤until the display is activated.
Then, release the switch.
Start up screen
When the unit starts up, the touchscreen display becomes active. The
first time the unit is started, the LANGUAGE screen will open. From the
second time, the Home Screen of the app selected on the LAUNCHER
screen when the unit was last turned off will reopen.
Turning the unit off (putting it in standby)
Slide the ¤/HOLD switch toward ¤until the display turns off. Then,
release the switch.
The unit turns off after it completes its shutdown process.
CAUTION
Always use the ¤/HOLD switch to turn the unit off.
If the unit is not able to conduct shutdown procedures properly,
recording data, settings and other changes could be lost. Lost data
and settings cannot be restored.
NOTE
The unit cannot be turned off when it is recording or in recording
standby.
Resume function
When this unit is turned off, it remembers the position where playback
was stopped.
The next time it is turned on, playback can be started from where it was
stopped.
NOTE
Since the stopped position is saved on the microSD card, it will not
be saved if the microSD card is replaced while the power is on.
Setting the language, date and time
Selecting the language
The first time the unit is turned on after purchase, the LANGUAGE screen
will open.
1. Swipe the screen vertically to find the desired language.
2. Tap the desired language to set it.
NOTE
The language setting can be set again using the GENERAL SETTINGS
screen > SYSTEM page > LANGUAGE item.
Setting the date and time
After setting the language and whenever the date and time has been
reset, the DATE/TIME screen will open to enable setting them.
1. Tap and slide the numbers to set the date and time.
2. Tap the SET button to confirm the settings.
NOTE
Date and time settings can also be changed using the GENERAL
SETTINGS screen > SYSTEM page > DATE/TIME item.
Formatting (initializing) microSD cards
The following message will appear if an unformatted card is loaded.
Tap OK to start formatting.
o We recommend using ERASE FORMAT when formatting microSD
cards the first time they are used with this unit.
o After formatting completes successfully, the LAUNCHER (app selec-
tion) screen will open.
CAUTION
Formatting will erase all data on a microSD card.
Back up to a computer, for example before formatting a card.
NOTE
o Formatting can also be executed using the GENERAL SETTINGS
screen > SYSTEM page > MEDIA FORMAT item. (page 9)
o Using the ERASE FORMAT option might improve writing performance
that has decreased due to repeated use. If “Write error. Recording will
continue.” or “Card speed reduced. Check BOF mark.”appears during
recording, format the card using the ERASE FORMAT option.
o ERASE FORMAT checks the memory for errors while formatting, so it
takes more time than QUICK FORMAT.

TASCAM Portacapture X6 17
4 - Connections
4 - 1 Connection examples
Using the MANUAL app
Multitrack recording of up to 4 inputs is possible.
Input jacks 3/4
MIC/EXT IN
(headphone) jack
LINE OUT jack
Mics
Digital SLR camera
Headphones
Built-in mics
Using the PODCAST app
Multitrack recording of up to 2 inputs is possible.
Input jacks 3/4
(headphone) jack
Mics
Headphones
Computer
USB Type-C port
NOTE
To use multiple sets of headphones, use a commercially-available
multichannel headphone amplifier, for example.
4 - 2 Setting the built-in mics
Using the built-in stereo mic
This unit’s built-in mics are adjustable, enabling the mic format to be
changed by setting their angles.
True X-Y method
This enables recording with a clear stereo field and reduced phase differ-
ence.
A-B method
This enables recording with a wide left–right stereo field.
Hold the rings indicated by the black arrows and turn the built-in mics to
change their angles.
True X-Y method A-B method
Turn the mics
to change their
orientations.
The built-in mics become usable by turning their lock rings until they
stop and are tight.
The built-in mics will not be set properly if their rings have not been
turned until they stop.

18 TASCAM Portacapture X6
4 - Connections
4 - 3 Connecting external mics and other
equipment
Connecting external mics
Connect mics to the Input 3/4 XLR connectors.
Point the mics at the sound source and place the unit in a stable location
where there is little vibration.
When connecting to the XLR jacks, insert the plug until a clicking sound
is made. When disconnecting, pull the plug out while pressing the lock-
ing mechanism.
Example connecting to input jacks 3–4
Mics
After connecting and making INPUT SELECT settings, use the INPUT set-
tings to select MIC or LINE level. (“Making input settings for each input”
on page 20)
NOTE
o Make phantom power settings when using a mic that requires phan-
tom power. (page 22)
o When connecting a device with unbalanced output, use the MIC/EXT
IN jack.
Connecting mid-side mics
Mid-side mics can be connected to input jacks 3 and 4.
Connect the mid-side mic mid to input jack 3 and the side to input jack 4.
After connecting them, select the tracks assigned to the jacks they are
connected to using the GENERAL SETTINGS screen > I/O SETTINGS > MS
DECODE> SOURCE item.
See “Using the mid-side decoding function”on page 49 for details
about recording with mid-side mics.
Connecting other equipment
o Use the MIC/EXT IN jack to connect stereo mini cables.
After connecting and making input selection settings (page 20),
change the input setting to MIC/EXT IN. (“Making input settings for
each input” on page 20)
o To connect XLR plugs, use input jacks 3/4.
After connecting and making the INPUT SELECT setting (page 20),
change the input setting to LINE. (“Making input settings for each
input” on page 20)
XLR plugs
Audio device
or other equip-
ment
Audio device
or other equip-
ment
MIC/EXT IN jacks
Input jacks 3/4
XLR-3-31 equivalent(1: GND, 2: HOT, 3: COLD)
4 - 4 Connecting cameras
When recording video with a camera, the same sound can be recorded
simultaneously by the camera and this unit. In order to input sound to
the camera, connect it with this device as shown below.
Digital SLR camera
External mic input jack
LINE OUT jack
Setting the output for camera use
The line output level can be attenuated up to 30 dB for camera use.
See “Setting the output for camera use”on page 46.

TASCAM Portacapture X6 19
4 - Connections
4 - 5 Connecting monitoring equipment
To listen with an external monitoring system (powered monitor speakers
or an amplifier and speakers), connect it to the LINE OUT jack.
To listen with headphones, connect them to the (headphone) jack.
Depending on the settings, monitoring might not be possible until the
REC0button is pushed. See“Recording operation flow” on page 24
for details.
Powered monitor speakers or
amplifier and speakers
Headphones
LINE OUT jack (headphone) jack
4 - 6 Using the built-in speaker
To listen to the playback sound through the built-in speaker, set the
GENERAL SETTINGS > I/O SETTINGS > SPEAKER item to ON.
NOTE
If anything is connected to the (headphone) jack, sound will not be
output from the speaker even if SPEAKER output is set to ON.
4 - 7 Adjusting the playback volume
Press +/– on the (headphone/speaker) volume control to adjust the
volume output from the built-in speaker and (headphone) jack.
CAUTION
To listen to the playback sound through the built-in speaker, set the
GENERAL SETTINGS > I/O SETTINGS > SPEAKER item to ON. This is off
when shipped new from the factory.
NOTE
Sound will not be output through the speaker when the unit is
recording, in recording standby, in recording guide mode or when
headphones are connected.
4 - 8 Connecting computers and smart-
phones
The following functions can be used when connected by USB to a com-
puter (Windows/Mac) or smartphone.
o Use the unit as a USB mic
o Simultaneously record to a computer while recording on the microSD
card in the unit (backup recording)
o Monitor sound from the computer
o Use as a microSD card reader (only when connected to a computer)
NOTE
A USB cable must be prepared to connect this unit to a computer
(Windows/Mac) or smartphone. (see “USB cables (for communication
or data transmission)”on page 6)
ComputerUSB cable
USB Type-C port
o Stream live mixes of sounds playing back from a computer and input
through mics connected to this unit (loopback function)
Music
Mics
Music
Mics
Mics (con-
nected or
built-in) Computer
See “USB connection”on page 47 for details about use.

20 TASCAM Portacapture X6
5 - Input and output settings
5 - 1 Using the INPUT SELECT function
Track numbers and input jacks can be assigned in pairs.
The INPUT SELECT function can be used from recording app screens.
1. Press the Shortcut Menu button at the bottom left of the unit.
MANUAL recording app example
2. Tap the INPUT SELECT icon in the Shortcut Menu.
3. Tap a pair of tracks to change their input connector assignments.
4. Tap the input connector(s) to assign.
Repeat steps 3–4 as necessary.
5. Tap the BACK icon to complete the setting.
CAUTION
Since the built-in mic and MIC/EXT IN cannot be used at the same
time, only one can be assigned to tracks.
NOTE
o Input settings are retained by newly assigned tracks. The stereo link
function is an exception.
o “MIC” will be shown for tracks that have the built-in mics assigned to
them.
o “EXT”will be shown for tracks that have the EXT IN jack assigned to
them and “EXT MIC” will be shown if plug-in power is turned on (page
23).
5 - 2 Making input settings for each input
Tap the input settings icon of the track to set or INPUT SETTINGS in the
shortcut menu to open the settings screen.
MANUAL recording app exam-
ple
e
Tap the input settings icon.
NOTE
o Input settings cannot be made for USB.
o Not all setting items are shown on a single screen. Swipe the screen
up and down to show the necessary sitting items.
o The tracks that can be set depend on the app. (page 11)
o Even though tracks are selected to make settings, they are saved as
settings for the input jacks assigned to those tracks. For this reason,
when the INPUT SELECT function is used to change the track assign-
ments of input jacks, the settings do not change for those inputs. The
stereo link function is an exception.
Using the STEREO LINK function
Audio from track pairs 1–2 and 3–4 can be sent to the mixer as stereo.
Select one of the tracks to be stereo-linked, and turn the STEREO LINK
setting on.
NOTE
o When shipped new from the factory, the built-in mics are connected
to tracks 1–2, which are stereo-linked. “MIC” is shown when the tracks
for the built-in mics are stereo-linked.
o Stereo-linking is always on for MIC/EXT IN input and USB input, so
the STEREO LINK button is disabled with them.
Setting recording input sources (INPUT)
Track input sources can be set.
For inputs 1/2, set“MIC” to “EXT”.
For inputs 3/4, set“MIC” to “LINE”.
o When “EXT” is selected, the MIC/EXT IN jack will be assigned with
stereo-linking to tracks.
o When “LINE” is selected the input signal is attenuated −22 dB.
Using phantom power (phantom voltage)
Make this setting when using mics that require phantom power. (page
22)
Adjusting the input level automatically (AUTO GAIN)
When this function is on, the input level will be adjusted automatically
in response to the input audio. Using this function, the recording level is
automatically increased when the input sound is too quiet or decreased
when it is too loud. This function is useful for recording meetings, for
example. When AUTO GAIN is on, the recording level cannot be changed
manually.