
A waterproof Quick Disconnect Wrist
If using a TASKA HandGen2 with a Seal Ring provided by TASKA, then you
may immerse both the wrist and the hand into water to the first opening
on the arm socket.
See Appropriate Use Guide for more details on the Limits of Use for your
TASKA Hand.
TASKA Prosthetics is not responsible for the waterproofness of
the prosthetic socket that your TASKA Hand will be attached to.
Please discuss your socket’s waterproofness with your clinician.
Caring for your wrist
When using a TASKA HandGen2, care must be taken to maintain the
waterproof seal. Your Lamination Collar Kit includes a Seal Ring fitted to
your hand, and a sealing surface on the Lamination Collar itself
(see diagram over the page). Regularly check these parts for damage
such as tearing or deep scratches which could compromise the seal.
If you notice damage to the Seal Ring or sealing surfaces, the
waterproof seal may be compromised. Do not submerge your hand in
water above the Wrist Flexion buttons and contact your clinician.
Regularly clean the Seal Ring and sealing surfaces on your Lamination