TDK DEA Series DEA200710LT-1238A1 User manual

(1/2)
001-02 / 20080113 / e731_dea200710lt_1238.fm
• All specifications are subject to change without notice.
Multilayer Chip Low Pass Filters Conformity to RoHS Directive
For DVB-H/ISDB-T
DEA Series DEA200710LT-1238A1
SHAPES AND DIMENSIONS
0.65±0.1
0.2±0.15 0.35±0.1
2.0±0.1
654
123
Dimensions in mm
0.3+0.1
–0.15
0.25+0.1
–0.2
0.6±0.1
1.25±0.1
1 GND
2IN
3 GND
4 GND
5 OUT
6 GND
Terminal functions
RECOMMENDED PC BOARD PATTERNS
0.6
0.8
2.4
0.3
1.0
1.7
Products
GND
OUT/IN
ø0.3 Through-hole
Solder resist
Dimensions in mm
This width is 50Ω.
Micro-strip line for 0.4mm thick glass-epoxy substrate.
ELECTRICAL CHARACTERISTICS
Item Minimum value Typical value Maximum value
Insertion loss [470 to 710MHz] (dB) —0.88 1
Ripple [470 to 710MHz] (dB) —0.02 0.5
Attenuation [880 to 960MHz] (dB) 20 25 —
Return loss [470 to 710MHz] (dB) 10 15 —
Temperature range Operating (°C) –40 —+85
Storage (°C) –40 —+85
• Ta: +25±5°C
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

(2/2)
001-02 / 20080113 / e731_dea200710lt_1238.fm
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
INSERTION LOSS
Frequency(MHz)
–3.0
–2.0
–2.5
–1.0
–1.5
–0.5
0
Insertion loss(dB)
1: 470MHz
–0.354dB
2: 710MHz
–0.888dB
50 250 450 650 850 1050 1250 1450
1
2
RETURN LOSS
Frequency(MHz)
50 250 450 650 850 1050 1250 1450
10
20
–40
–30
–20
–10
0
Return loss(dB)
1: 470MHz
–15.4dB
2: 710MHz
–23.2dB
1
2
ATTENUATI ON
–50
–40
–45
–30
–35
–20
–25
–10
–15
–5
0
Frequency(MHz)
Attenuation(dB)
1: 830MHz
–6.0dB
2: 880MHz
–25.6dB
3: 960MHz
–33.5dB
50 550 1050 1550 2050 2550
1
3
2
VSWR
1: 470MHz
1.41dB
2: 710MHz
1.15dB
–0.2
0.2
0.4
0.6
0.8
0
–0.4
–0.6
–0.8
1
1
–1
jV
U
–1 12