Team Magic g4rs User guide

61060

01
Thank you for choosing the Team Magic G4RS. Before you start building the G4RS, we suggest you
read though the instruction manual first. Be sure to check all assembly and performance tips before
you start. We hope you enjoy the fine building processes.
General Building Tips:
Read the instruction manual before building.
Clear a work area and try to work on a light color towel to avoid missing dropped parts.
Don't forge the thread lock. Be certain to use thread-lock on all the machine screws that thread into metal. Put it
on the screws that are secured with locknuts and the setscrews that secure the linkage stops, too. Don't skimp on
the thread-lock or you'll be searching in the dirt for screws that vibrated loose.
Don't over-tighten fasteners. Many assembly problems are caused by over-tightening screws or nuts. Don't use too
large a grip. Please go slowly and feel the resistance build. Just snug it up.
As you put more time and runs on the car, the suspension arms, and basically anything else that moves, can stretch
and wear. Though we have a very rigorous quality control program and make every effort to ensure that the parts
have the best possible fit when you get them. Unfortunately there is very little, or nothing we can do to prevent
these parts from wearing out. When the arms begin to wear you will notice that some slop develops between the
carrier or hub and the arms. This slop can be taken out by shimming the arm, hub or carrier. If you take a look at
any of the factory driver's cars you will definitely find that they use shims to take up some of the slop that occurs over
a period of time. The shims can also be used on the inside of the suspension arms in the same manner. When
shimming the parts, care must be taken not to add too many shims. The parts must still move freely without binding.
When it doesn't fit, please double check. If an assembly is not going together correctly, then either there really is a
bad fit (e.g. a part is damaged or defective) or a mistake in assembly. Always re-read the instructions when there
are any problems. If you cannot figure out what's wrong, always ask dealer, distributor or Team Magic. Don't use
force beyond what the instructions call for.
Using the right tools makes assembly much easier. The instructions below finely indicate you what tools to get to
make things easier. We don't want to scare you by saying that all these tools are required, but you will have an
easier time if you have them. Borrow them from a friend to check if necessary.
The assembly is arranged so that you will open the bag and finish that bag before you go on to the next bag.
Sometimes, you will have parts remaining at the end of a bag. These will become part of the following bags.
A Good Dealer Is Extremely Important!!
A good hobby dealer can help you with most assembly problems you might encounter. This is the main reason why
you should buy your kits from a good dealer rather than from the cheapest dealer. Bring your problematic parts to
the dealer and, most likely, you'll walk away soon thereafter with the problem solved. If you think that you really
don't have the mechanical skills to complete the assembly, you may pay your dealer to finish the job for you. We
can recommend good dealers to you if you need. Please send us mails for more information. Email:
[email protected]

02
1
504014
504013
504013
151218
12x18
504012
504011 126303S
3x3
504016
504015
130110
3.6x8.5x0.2
504015
116228
2x9.0
130109
5.2x15x0.3
152005
4.7x1.4
504017
504018
504015
116228
2x9.0
130109
5.2x15x0.3
152005
4.7x1.4
504017
504018
122506
2.5x6
152006
23x1
151218
12x18
504014
#50000
02 B
01 B
x4
126303S
3x3mm screw
x4
151218
12x18 ballbearing
x2
116228
2x9.0 pin
x2
152005
4.7x1.4 oring
x4
122506
2.5x6 screw
x1
152006
23x1 oring
x2
130109
5.2x15x0.3 washer
x4
130110
3.6x8.5x0.2 washer

03
2
111161
M2.0
504019
130111
2.6x6
504020
504021
504019
152007
P3
504022
504023
#600
12mm
504024
504025
504019
504026 152002
11.2x1.7
504027
504028
504023
504030
504032-56
151015
10x15
126306
3x6
126306
3x6
504029
504031-62
03 B
04 B
x4
111161
M2.0 locknut
x4
130111
2.6x6 washer
x8
152007
P3 oring
x4
152002
11.2x1.7 oring
x6
126306
3x6 screw
x2
151015
10x15 ballbearing

04
1
126314HBU
3x14
126305S
3x5
116206
2x9.8
504035
504036
504033
504034
504037
1.50mm
116203
E5.0
126308C
3x8
504038
504041
504040
504039
504047 504046
504044
504042
504045
504043
504049-16
504050-22
504048
126312C
3x12
130113
5x9x0.15
130112
5x9x0.3
504051
150510TL
5x10
150510
5x10
05 B
PULL PUSH
We suggest the clutch gap
should be between 0.4~0.7mm
x2
126314HBU
3x14 screw
x2
126305S
3x5 screw
x1
116206
2x9.8 pin
x1
116203
E5.0 E-clip
x4
126308C
3x10 screw
x1
126312C
3x12 screw
x3
130113
5x9x0.15 washer
x3
130112
5x9x0.30 washer
x2
150510
5x10 ballbearing
x2
150510TL
5x10 trustbearing

05
1
504054
504052
504053
126303S
3x3
126306
3x6
126308
3x8
2.0mm
504060
150508C
5x8
504059
504061
150407C
4x7
504118
126314HBU
3x14
06 B
A
07 B
A
504055
504057
504058
111003
504056
126305S
3x5
126310
3x10
126308
3x8
126310
3x10
126308
3x8
x1
126303S
3x3mm screw
x1
126306
3x6 screw
x9
126308
3x8 screw
x2
126305S
3x5 screw
x6
126310
3x10 screw
x1
150508C
5x8 collar
x1
150407C
4x7 collar
x2
126314HBU
3x14 screw

06
1
504105
504079
504110
504059
504079 504110
504110
126308BU
3x8
126308
3x8
126314BU
3x14
126308BU
3x8
126308
3x8
504105
504062
504063
504063
115007
4x4
115030
5x4
504064
504065
504066
150407C
4x7
A B C D
Four different Ackermann angel settings
Basic set up : Mode D
B
A
x4
126308BU
3x8 screw
x8
126308
3x8 screw
x1
126314BU
3x14 screw
x1
115007
4x4 ballstud
x2
115030
5x4 ballstud
x2
150407C
4x7 collar

07
1
504013-19T
504013-19T
504013-25T
116206
2x9.8
150612
6x12x4
152009
9x2
126303S
3x3
504067
504068
116223
2x11.8
504069
126308
3x8
116214
E7.0
504013-21T
504070
08 B
A
x2
126303S
3x3mm screw
x2
152009
9x2 oring
x1
116206
2x9.8 pin
x1
116223
2x11.8 pin
x2
150612
6x12 ballbearing
x1
116214
E7.0 E-clip
x2
126308
3x8 screw

08
1
504071
116206
2x9.8
152009
504072
126404S
4x4
126303S
3x3
150612
6x12
150816
8x16
116212BU
2x12
126308
3x8
126308BU
3x8
126310BU
3x10
504073
504074
504075
504076
504024
126308BU
3x8
TightLoose
126308
3x8
504077
504078
126308BU
3x8
09 B
A
Tight Loose
x1
150816
8x16 ballbearing
x1
150612
6x12 ballbearing
x1
126404S
4x4 screw
x1
126303S
3x3mm screw
x1
116206
2x9.8 pin
x1
152009
9x2 oring
x2
116212BU
2x12 screw
x2
126310BU
3x10 screw
x8
126308BU
3x8 screw
x6
126308
3x8 screw

09
1
504081
504081
504080 504082
126312BU
3x12
126305S
3x5
115029
4x6
126308S
3x8
504084
504083
504119
504086
504087
504085
126308S
3x8
115029
4x6
126308
3x8
126308BU
3x8
504058
504088
504089
504084
The same as above
The same as above
10 B
A
11 B
A
x2
126312BU
3x12 screw
x2
126305S
3x5 screw
x4
126308S
3x8 screw
x4
115029
4x6 ballstud
x3
126308BU
3x8 screw
x2
126308
3x8 screw
1
x4
126204BU
2x4 screw
x4
126308BU
3x8 screw
x2
116220
3x10.8 pin
x2
116210
1.8x9.8 pin
x2
151015
10x15 ballbearing
x2
115030
5x4 ballstud
x2
150612
6x12 ballbearing
x2
116206
2x9.8 pin
504056
504091
504084
504090
126204BU
2x4
126308BU
3x8
504092
504093
12 B
A
13 B
A
The same as above
16.5mm
x2
The same as above
504024
504097
504096
150612
6x12
115030
5x4
151015
10x15
116210
1.8x9.8
116220
3x10.8
504062
504094
504095
504120
504099
504098
116206
2x9.8

10
1
x4
126204BU
2x4 screw
x4
126308BU
3x8 screw
x2
116220
3x10.8 pin
x2
116210
1.8x9.8 pin
x2
151015
10x15 ballbearing
x2
115030
5x4 ballstud
x2
150612
6x12 ballbearing
x2
116206
2x9.8 pin
504056
504091
504084
504090
126204BU
2x4
126308BU
3x8
504092
504093
12 B
A
13 B
A
The same as above
16.5mm
x2
The same as above
504024
504097
504096
150612
6x12
115030
5x4
151015
10x15
116210
1.8x9.8
116220
3x10.8
504062
504094
504095
504120
504099
504098
116206
2x9.8

11
1
126304BU
3x4
116201
2x10.8
115029
4x6
504067
126305S
3x5
126310BU
3x10
126308
3x8
504089
126303S
3x3
504102
504103
504104
504121
504097
150612
6x12
116206
2x9.8
126314S
3x14
151015
10x15
504100
504096
504095
504120
504062
116210
1.8x9.8
504099
504101
116220
3x10.8
x2
x2
14 B
A
15 B
A
33.5mm
x2
116220
3x10.8 pin
x2
116210
1.8x9.8 pin
x2
151015
10x15 ballbearing
x2
150612
6x12 ballbearing
x2
116206
2x9.8 pin
x2
126308
3x8 screw
x2
126310BU
3x10 screw
x2
126303S
3x3 screw
x1
115029
4x6 ballstud
x1
126304BU
3x4 screw
x1
126305S
3x5 screw
x2
126314S
3x14 screw
x1
116201
2x10.8 pin

12
1
126308BU
3x8
126308BU
3x8
130114
3x6
111007ST
504074
126308
3x8
504074
504124
504073
116212BU
2x12
126312BU
3x12
126312BU
3x12
504074
504107
504106
to bettery
to receiver
504109
504108
504108
126206C
2x6
126306BU
3x6
16 B
A
17 B
A
504108
504084 502222
servo
( Not Included )
126308SBU
3x8
115006
4x3
502268 Futaba
502269 ko sanwa.JR
Thick for steering
( Not Included )
( Not Included )
x4
126308BU
3x8 screw
x2
111007ST
M3 locknut
x2
126308
3x8 screw
x2
116212BU
2x12 screw
x4
126312BU
3x12 screw
x4
126308SBU
3x8 screw
x1
115006
4x3 ballstud
x2
126206C
2x6 screw
x3
126306BU
3x6 screw

13
1
504112
504112
504111
504112
150407C
115006
4x3
122508BU
2.5x8
servo
( Not Included )
504108
504084
502221 Futaba
502223 ko sanwa.JR
Thin for Throttle
502222
504122
126312S
3x12 126308SBU
3x8
( Not Included )
115006
4x3
116212BU
2x12
126310
3x10
152001
P5
122506
2.5x6
504073
504074
504089
504113
126308
3x8
126306
3x6
114062
( Not Included )
Glass tape
( Not Included )
504105
115016
126303S
3x3
126306
3x6
18 B
A
504081
504081
504114
Receiver
( Not Included )
122505BU
2.5x5
x2
115006
4x3 ballstud
x1
126312S
3x12 set
x4
126308SBU
3x8 scre
x2
122508BU
2.5x8 screw
x2
150407C
4x7x2.5 collar
x3
126308
3x8 screw
x4
126306
3x6 screw
x1
116212BU
2x12 screw
x2
122506
2.5x6 screw
x1
126310
3x10 screw
x2
122505BU
2.5x5 screw
x1
126303S
3x3mm screw
x1
152001
P5 O-ring

14
1
126308
3x8
111003
19 B
A
504116
111160
( Not Included )
126303S
3x3
115023
116208
116207
119004
117001
( Not Included )
126316BU
3x16
126308BU
3x8
504115
111118
R5
504123
x4
126308
3x8 screw
x4
126308BU
3x8 screw
x4
111160
M4 locknut
x4
126303S
3x3mm screw
x2
126316BU
3x16 screw

15

16

17
PARTS
1
111003
114062
115016
115023
116207
116208
117001
119001
502221
502222
502223
502268
502269
504011
504012
504013
504014
504015
504016
504017
504018
504019
504020
504021
504022
504023
504024
504025
504026
504027
504028
504029
504030
504031-62
504031-63
504031-64
504032-56
504032-57
504032-58
504033
504034
504035
504036
504037
504038
504039
504040
504041
504042
504043
504044
504045
504046
504047
504048
504049-16
504049-17
504050-21
504050-22
504050-23
3mm Alum Fh Washer(6)
6V Square Receiver Pack
Antenna Rod(2)
Throttle Ball Cup(4)
Throttle/Break Linkage Spring(4)
Throttle/Break Linkage Rod(4)
Alum Stopper(4)
Silicone Fuel Tube(60cm)
Servo Arm (Futaba)(2)
Servo spacer(4)
Servo Arm (Ko Sanwa JR)(2)
Thick Servo Arm (Futaba)(2)
Thick Servo Arm (Ko Sanwa JR)(2)
G4 Front Spool
G4 Front Spool Outdrive(2)
G4 Pully Set 27T, 19T, 25T, 19T, 21T
G4 Belt Adjuster(4)
G4 Bevel Gear Set
G4 Differential Bevel Shaft (2)
G4 Differential Gear Box Set
G4 Rear Differential Outdrive (2)
Shock Piston Plastic Parts
Shock Shaft (2)
Shock Body (2)
Shcok Body Lower Cap(2)
Shock Ball End & Nylon Set
5.8mm Ball
Shcok Body Upper Cap(2)
Shcok Bladder (4)
Shcok Body Collar (2)
G4 Shock Spring(2)
G4 One-Way Hub Set
G4 2 Speed Housing
G4 Spur Gear 62T
G4 Spur Gear 63T
G4 Spur Gear 64T
G4 Spur Gear 56T
G4 Spur Gear 57T
G4 Spur Gear 58T
G4 2 Speed Shaft (Rear)
G4 2 Speed Shaft (Front)
G4 2 Speed Spring(2)
G4 2 Speed Shoe(2)
G4 2 Speed Shoe Cam Post (2)
G4 Engine Mount (pair)
Flywheel Bushing
G4 Flywheel
G4 Clutch Nut
G4 Push Type Clutch Centrifugal Shoe
G4 Push Type Clutch Shoe Plate
G4 Push Type Clutch Shoe
G4 Push Tyep Clutch Spring Holder
Push Type Clutch Spring (Green)
G4 Clutch Adjusting Nut
G4 Push Type Clutch Bell
G4 Push Tupe Clutch Gear 16T
G4 Push Tupe Clutch Gear 17T
G4 Push Tupe Clutch Gear 21T
G4 Push Tupe Clutch Gear 22T
G4 Push Tupe Clutch Gear 23T
504051
504052
504053
504054
504055
504056
504057
504058
504059
504060
504061
504062
504063
504064
504065
504066
504067
504068
504069
504070
504071
504072
504073
504074
504075
504076
504077
504078
504079
504080
504081
504082
504083
504084
504085
504086
504087
504088
504089
504090
504091
504092
504093
504094
504095
504096
504097
504098
504099
504100
504101
504102
504103
504104
504105
504106
504107
504108
504109
50411 0
504111
G4 Thrust Bearing Retainer
G4 Chassis
Pipe Holder
G4 Servo Saver Post
G4 Front Bulkhead (pair)
G4 Front Hinge Pin Mount Set
G4 Rear Bulkhead (pair)
G4 Rear Hinge Pin Mount Set
G4 2 Speed Shaft Side Plate(pair)
G4 Brake Cam
G4 Brake Piston
G4 Steering Adjusting Spacers, 9mm Ball Spacers
G4 Servo Saver Set
G4 Servo Saver Alum. Post
G4 Servo Saver Spring
G4 Servo Saver Adjusting Nut
G4 Middle Shaft Mount , Brake Lever
G4 Middle Shaft
G4 Front Belt (204mm)
G4 Rear Middle Pully Mount
G4 Brake Disk
G4 Rear Belt (186mm)
Floating Body Mount
G4 Bumper and Body post set
G4 Rear Shock Tower
G4 Rear Bulkhead Upper Mount
G4 Front Shock Tower
G4 Front Bulkhead Upper Mount
G4 Alum. Side Plate(Pair)
G4 Front Anti-Roll Bar Set(pair)
G4 Front Anti-Roll Bar Mount , Receiver Box
G4 Front Lower Arm(Pair)
G4 Front Lower Hinge Pin (3x71.5mm)
Adjustment Washer Set
G4 Rear Lower Arm(pair)
Rear Anti-Roll Bar Turnbuckle(2)
Rear Anti-Roll Bar Nut
G4 Rear Lower Hing Pin (3x54mm)
G4 Rear Plate, Handle, Rear Anti-Roll Mount
G4 Front Upper Arm (pair)
G4 Front Upper Hinge Pin (3x41mm)
4x25mm Adjustable Rod (2)
5.8mm Ball End (10)
G4 Front Steering Block (L&R)
M10 Wheel Adapter Nut (4)
Quick-Change Bearing Stopper (4)
Hex Wheel Adapter (4)
G4 CVA Front Drive Shaft(2)
Wheel Adapter Outdriver(2)
G4 Rear Hub Carrier(pair)
G4 CVA Rear Drive Shaft(2)
Rear Anti-Roll Bar
5.0mm Anti-Roll Bar Ball End(4)
3x50mm Adjustable Rod (2)
G4 Radio Plate Support Set
3x25mm Adjustable Rod (2)
4mm Ball End (10)
G4 Servo Mount Set
G4 Receiver Extended Line
G4-Side Belt Tensioner Set
G4 Throtte Swing Arm Screw (2)
Parts List

18
PARTS
1
111003
114062
115016
115023
116207
116208
117001
119001
502221
502222
502223
502268
502269
504011
504012
504013
504014
504015
504016
504017
504018
504019
504020
504021
504022
504023
504024
504025
504026
504027
504028
504029
504030
504031-62
504031-63
504031-64
504032-56
504032-57
504032-58
504033
504034
504035
504036
504037
504038
504039
504040
504041
504042
504043
504044
504045
504046
504047
504048
504049-16
504049-17
504050-21
504050-22
504050-23
3mm Alum Fh Washer(6)
6V Square Receiver Pack
Antenna Rod(2)
Throttle Ball Cup(4)
Throttle/Break Linkage Spring(4)
Throttle/Break Linkage Rod(4)
Alum Stopper(4)
Silicone Fuel Tube(60cm)
Servo Arm (Futaba)(2)
Servo spacer(4)
Servo Arm (Ko Sanwa JR)(2)
Thick Servo Arm (Futaba)(2)
Thick Servo Arm (Ko Sanwa JR)(2)
G4 Front Spool
G4 Front Spool Outdrive(2)
G4 Pully Set 27T, 19T, 25T, 19T, 21T
G4 Belt Adjuster(4)
G4 Bevel Gear Set
G4 Differential Bevel Shaft (2)
G4 Differential Gear Box Set
G4 Rear Differential Outdrive (2)
Shock Piston Plastic Parts
Shock Shaft (2)
Shock Body (2)
Shcok Body Lower Cap(2)
Shock Ball End & Nylon Set
5.8mm Ball
Shcok Body Upper Cap(2)
Shcok Bladder (4)
Shcok Body Collar (2)
G4 Shock Spring(2)
G4 One-Way Hub Set
G4 2 Speed Housing
G4 Spur Gear 62T
G4 Spur Gear 63T
G4 Spur Gear 64T
G4 Spur Gear 56T
G4 Spur Gear 57T
G4 Spur Gear 58T
G4 2 Speed Shaft (Rear)
G4 2 Speed Shaft (Front)
G4 2 Speed Spring(2)
G4 2 Speed Shoe(2)
G4 2 Speed Shoe Cam Post (2)
G4 Engine Mount (pair)
Flywheel Bushing
G4 Flywheel
G4 Clutch Nut
G4 Push Type Clutch Centrifugal Shoe
G4 Push Type Clutch Shoe Plate
G4 Push Type Clutch Shoe
G4 Push Tyep Clutch Spring Holder
Push Type Clutch Spring (Green)
G4 Clutch Adjusting Nut
G4 Push Type Clutch Bell
G4 Push Tupe Clutch Gear 16T
G4 Push Tupe Clutch Gear 17T
G4 Push Tupe Clutch Gear 21T
G4 Push Tupe Clutch Gear 22T
G4 Push Tupe Clutch Gear 23T
504051
504052
504053
504054
504055
504056
504057
504058
504059
504060
504061
504062
504063
504064
504065
504066
504067
504068
504069
504070
504071
504072
504073
504074
504075
504076
504077
504078
504079
504080
504081
504082
504083
504084
504085
504086
504087
504088
504089
504090
504091
504092
504093
504094
504095
504096
504097
504098
504099
504100
504101
504102
504103
504104
504105
504106
504107
504108
504109
50411 0
504111
G4 Thrust Bearing Retainer
G4 Chassis
Pipe Holder
G4 Servo Saver Post
G4 Front Bulkhead (pair)
G4 Front Hinge Pin Mount Set
G4 Rear Bulkhead (pair)
G4 Rear Hinge Pin Mount Set
G4 2 Speed Shaft Side Plate(pair)
G4 Brake Cam
G4 Brake Piston
G4 Steering Adjusting Spacers, 9mm Ball Spacers
G4 Servo Saver Set
G4 Servo Saver Alum. Post
G4 Servo Saver Spring
G4 Servo Saver Adjusting Nut
G4 Middle Shaft Mount , Brake Lever
G4 Middle Shaft
G4 Front Belt (204mm)
G4 Rear Middle Pully Mount
G4 Brake Disk
G4 Rear Belt (186mm)
Floating Body Mount
G4 Bumper and Body post set
G4 Rear Shock Tower
G4 Rear Bulkhead Upper Mount
G4 Front Shock Tower
G4 Front Bulkhead Upper Mount
G4 Alum. Side Plate(Pair)
G4 Front Anti-Roll Bar Set(pair)
G4 Front Anti-Roll Bar Mount , Receiver Box
G4 Front Lower Arm(Pair)
G4 Front Lower Hinge Pin (3x71.5mm)
Adjustment Washer Set
G4 Rear Lower Arm(pair)
Rear Anti-Roll Bar Turnbuckle(2)
Rear Anti-Roll Bar Nut
G4 Rear Lower Hing Pin (3x54mm)
G4 Rear Plate, Handle, Rear Anti-Roll Mount
G4 Front Upper Arm (pair)
G4 Front Upper Hinge Pin (3x41mm)
4x25mm Adjustable Rod (2)
5.8mm Ball End (10)
G4 Front Steering Block (L&R)
M10 Wheel Adapter Nut (4)
Quick-Change Bearing Stopper (4)
Hex Wheel Adapter (4)
G4 CVA Front Drive Shaft(2)
Wheel Adapter Outdriver(2)
G4 Rear Hub Carrier(pair)
G4 CVA Rear Drive Shaft(2)
Rear Anti-Roll Bar
5.0mm Anti-Roll Bar Ball End(4)
3x50mm Adjustable Rod (2)
G4 Radio Plate Support Set
3x25mm Adjustable Rod (2)
4mm Ball End (10)
G4 Servo Mount Set
G4 Receiver Extended Line
G4-Side Belt Tensioner Set
G4 Throtte Swing Arm Screw (2)
Parts List
SCREW
2
111007ST
111160
111161
115006
115007
115029
115030
116212BU
122505BU
122506
122508BU
126206C
126303S
126304BU
126305S
126306
126308
126308S
126308C
126308BU
126308SBU
126310
126310BU
126312S
126312C
126314BU
126314S
126314HBU
126316BU
126404S
M3.0 Lock Nut(10)
M4.0 Lock Nut(4)
M2.0 Lock Nut(10)
4x3mm Bsll Stud(10)
4x4mm Ball Stud(10)
4x6mm Ball Stud(6)
5x4mm Ball Stud(6)
2x12mm BH Screw(10)
M2.5x5mm BH Screw(10)
M2.5x6mm FH Screw(10)
M2.5x8mm BH Screw(10)
M2.0x6mm Cap Screw(6)
M3x3mm Set(6)
M3x4mm BH Screw(10)
M3x5mm Set(6)
M3x6mm FH Screw(6)
M3x8mm FH Screw(6)
M3x8mm Set(10)
M3x8mm Cap Screw(6)
M3x8mm BH Screw(6)
M3x8mm SBH Screw(10)
M3x10mm FH Screw(6)
M3x10mm BH Screw(6)
M3x12mm Set(6)
M3x12mm Cap Screw(6)
M3x14mm BH Screw(6)
M3x14mm Set(6)
M3x14mm BH Screw H(10)
M3x16mm BH Screw(10)
M4x4mm Set(6)
50411 2
50411 3
50411 4
50411 5
50411 6
50411 7
50411 8
50411 9
504120
504121
504122
504123
504124
G4 Throtte Swing Arm Set
G4 Radio Plate
G4 Receiver Box Hinge
G4 Feul Tank Set
G4 Side Belt (360mm)
#50000 Silicone Oil
Brake Pad(pair)
5.0mm Ball End(6)
9.0mm Pivot Ball(2)
5.0mm Long Ball End(6)
4.0mm Short Ball End(6)
Pipe Holder Spring
G4 Foam Bumper
PIN
5
111118
111120
116201
116203
116206
116210
116214
116220
116223
116228
R5 R-Clip(10)
R6 R-Clip(10)
2x10.8mm Pin(10)
E5.0 E-Clip(10)
2x9.8mm Pin(10)
1.8x9.8mm Pin(10)
E7.0 E-Clip(4)
3x10.8mm Pin(10)
2x11.8mm Pin(10)
2x9.0mm Pin(10)
WASHER
6
130109
13011 0
130111
13011 2
13011 3
13011 4
5.2x15x0.3 Washer(10)
3.6x8.5x0.2 Washer(10)
2.6x6x0.5 Washer(10)
5x9x0.30 Washer(10)
5x9x0.15 Washer(10)
3x6x1 Washer(10)
BEARING
3
150407C
150508C
150510
150510TL
150612
150816
151015
151218
4x7x2.5 Collar(4)
5x8x2.5 Collar(4)
5x10x4 Ball Bearing(4)
5 x 10 x 4 Trust Bearing
6x12x4 Ballbearing(4)
8x16x5 Ball Bearing(4)
10x15x4 Ball Bearing(4)
12x18x4 Ball Bearing(4)
O-RING
4
152005
152006
152007
152002
152009
152010
O-Ring 4.7x1.4(10)
O-Ring 23x1(10)
O-Ring P3(10)
O-Ring 11.2x1.7(10)
O-Ring 9x2(10)
O-Ring P5(10)

19
ARRANGEMENT OF PLASTIC PARTS
504013 504017
504055
504074
504056 504057
504058
504062 504063 504067
504059