Team Magic 507007 User guide

5070071/10 Electric Touring Car

Thank you for choosing the Team Magic E4RSIII , Before you start building the E4RSIII , we suggest you
read though the instruction manual first. Be sure to check all assembly and performance tips before
you start. We hope you enjoy the fine building processes.
General Building Tips:
Read the instruction manual before building.
Clear a work area and try to work on a light color towel to avoid missing dropped parts.
Don't forge the thread lock. Be certain to use thread-lock on all the machine screws that thread into metal. Put it
on the screws that are secured with locknuts and the setscrews that secure the linkage stops, too. Don't skimp on
the thread-lock or you'll be searching in the dirt for screws that vibrated loose.
Don't over-tighten fasteners. Many assembly problems are caused by over-tightening screws or nuts. Don't use too
large a grip. Please go slowly and feel the resistance build. Just snug it up.
As you put more time and runs on the car, the suspension arms, and basically anything else that moves, can stretch
and wear. Though we have a very rigorous quality control program and make every effort to ensure that the parts
have the best possible fit when you get them. Unfortunately there is very little, or nothing we can do to prevent
these parts from wearing out. When the arms begin to wear you will notice that some slop develops between the
carrier or hub and the arms. This slop can be taken out by shimming the arm, hub or carrier. If you take a look at
any of the factory driver's cars you will definitely find that they use shims to take up some of the slop that occurs over
a period of time. The shims can also be used on the inside of the suspension arms in the same manner. When
shimming the parts, care must be taken not to add too many shims. The parts must still move freely without binding.
When it doesn't fit, please double check. If an assembly is not going together correctly, then either there really is a
bad fit (e.g. a part is damaged or defective) or a mistake in assembly. Always re-read the instructions when there
are any problems. If you cannot figure out what's wrong, always ask dealer, distributor or Team Magic. Don't use
force beyond what the instructions call for.
Using the right tools makes assembly much easier. The instructions below finely indicate you what tools to get to
make things easier. We don't want to scare you by saying that all these tools are required, but you will have an
easier time if you have them. Borrow them from a friend to check if necessary.
The assembly is arranged so that you will open the bag and finish that bag before you go on to the next bag.
Sometimes, you will have parts remaining at the end of a bag. These will become part of the following bags.
A Good Dealer Is Extremely Important!!
A good hobby dealer can help you with most assembly problems you might encounter. This is the main reason why
you should buy your kits from a good dealer rather than from the cheapest dealer. Bring your problematic parts to
the dealer and, most likely, you'll walk away soon thereafter with the problem solved. If you think that you really
don't have the mechanical skills to complete the assembly, you may pay your dealer to finish the job for you. We
can recommend good dealers to you if you need. Please send us mails for more information. Email:
[email protected]
01

A
B
150510ST
116203
507110
116238
507109
126304BU
507110
116203
150510ST
K6601-110
507305BK
507304
507303BK
507302BK
126306
126306
507302BK
507303BK
507301
02
126306
3x6mm Steel FH
Screw
116203
E-clip 5
150510ST
5x10x4mm Steel
Bearing
116238
2x12.8mm Pin
126304BU
M3X5mm BH Screw

C
: Grease lubrication
507206
130137
507206
130129
130129
116228
152005
507207
507208
507114
507115
126308
507116
151015ST
507209
126312C507212 507211
507213
507212
126312C
507210
126304BU
151015ST507116
151015ST 507116
151015ST
507116
K6330-1000
152005
507207
507208
507206
Front
Rear
116228
03
151015ST
10x15x4mm Steel
Bearing
126308
3x8mm Steel Flat
Head Screw
126312C
3X12mm CAP Screw
116228
2x9.0mm Pin
152005
4.7x1.42 O-RING
130129
5.2x12x0.2mm Shim
126304BU
M3X4mm BH Screw
130137
3.1x8x0.3mm Washer

D
E
507329BK
507307 507330BK
126308BU
126306
507308BK
126305
507202
126308
116216
507331
507306
507309
126308BU
Front
04
126308BU
3X8mm Button
Head Screw
116216
3X6X1mm Washer
126306
3x6mm Steel F.H.
Screw
126308
3x8mm Steel F.H.
Screw
126305
3x5mm Steel FH
Screw

126308BU
507308BK
126308BU
507217
126212BU
507310
126306BU
126306BU
E
E
05
126308BU
3x8mm Steel Button
Head Screw
126212BU
2X12mm BH Screw
126306BU
3x6mm Button
Head Screw
Rear

F
F
503127BK
116134AS
503117BK
507312
126312BU
507326
507325
150508ST
507311BK
150306F
126306BU
06
150508ST
5x8x2.5mm Steel
Bearing
503117BK
5x4mm Ball Stud
126306BU
3x8mm Steel Button
Head Screw
503127BK
5x10mm Ball Stud
65.5mm
Front
126312BU
3x12mm Steel Button
Head Screw
150306F
3x6x2.5mm Flanged
Bearing

G
G
507130
126405S
503123
126204BU
503121
507127H
507313
130136 0.2 0.2
507315
507316
507314BK
130114
130114
507316
507315
507317BK
130136
130136
126307
126308S
Front
Front
0.4 0.4
07
130114
3X6X1mm Washer
126308S
M3X8mm Set
126204BU
2x4mm Steel Button
Head Screw
21mm
!
3mm
126405S
M4x5mm Set Screw
130136
3x5x0.75mm Alum.
Washer
126307
3x7mm Steel FH
Screw

H
H
Rear
Rear
08
130114
3X6X1mm Washer
503117BK
5x4mm Ball Stud
126310S
M3X10mm Set
507314BK
130114507316
507315
126310S
126405S
507319H
507218
503117BK
503117BK
507318
507312
130136
130114
507316
507315
130136
126307
507317BK
126307
3x7mm Steel FH
Screw
126405S
M4x5mm Set Screw
0.4 0.4 0.2 0.2
130136
3x5x0.75mm Alum.
Washer

I
I
(R)
(L)
507312
503117BK 116133AS
507138
126310BU
507219
507234-1
507234-4
507234-4
507136
507136
116240
507139
126206C
507234-5
507234-3
507234-6
507234-2
507140BK
150510ST
507234-7
130114
503127BK
130114
54mm
507234
111165
126303S
507141
Front
Front
09
130114
3X6X1mm Washer
150510ST
5x10x4mm Steel
Bearing
116240
2x9.8mm Pin
126206C
2x6mm Cap Screw
503127BK
Steering Block
5x10mm Ball Stud
126310BU
3x10mm Button Head
Screw
507234-7
5x10x3mm Steel
Bearing
503117BK
5x4mm Ball Stud
507234-6
1.5x8.5mm Pin
126303S
3x3mm Set Screw
111165
3mm Flanged Nut

J
J
507312
507320
503127BK
503117BK
116219
507142
507140BK
126206C
507312
116133AS
116240
116244
507138
507320-1
507320-2 507320-3
507320-4
150510ST
130114
507143 126304S
Rear
Rear
503117BK
5x4mm Ball Stud
10
130114
3X6X1mm Washer
150510ST
5x10x4mm Steel
Bearing
126206C
2x6mm Cap Screw
503127BK
Steering Block
5x10mm Ball Stud
116219
3x6x2mm Alum.
Washer 53.5mm
116240
2x9.8mm Pin
126304S
3x4mm Set Screw
116244
2x7.8mm Pin

507222
126303S
507321
150508
126304S
126304S
K
K
126303S
507321
150508
507258
126303S
Front
Rear
11
126303S
3x3mm Set Screw
126304S
3x4mm Set Screw
150508
5x8x2.5mm Bearing
1.2mm
1.3mm

L
L
126308SE
130125
116132AS
507312
507322
503138BK
116219
126306
126306BU
126308SE
507223
507147 (25T/Futaba/Savox/Orion/Power HD)
507148 (23T/KO/JR/Sanwa/Airtronics)
12
126308SE
3x8mm Steel Flat
Round Servo Mount
Screw
503138BK
5x7mm Ball Stud
130125
3x6x4mm Alum.
Washer
126306BU
3x6mm Steel Button
Head Screw
126306
3x6mm Steel FH
Screw
116219
3x6x2mm Alum.
Washer

M
M
13
126306BU
126306BU 507323
130114
126306BU
3x6mm Steel Button
Head Screw
126306
3x6mm Steel FH
Screw
507324
126306
126306
507152
126306BU 507324
126306BU
130114
3X6X1mm Washer
126306BU
3x6mm Steel Button
Head Screw
126306
3x6mm Steel FH
Screw
116219
3x6x2mm Alum.
Washer

N
N
#400
116219
3x6x2mm Alum.
Washer
507327
126308BU 116219
126308BU
K6310-400
14
116227
E-clip 2.0
130130
2.6X6X0.3mm
Washer
116227
507327-2
152002
507327-2
507327-3
507327-4
F:K4901-27
R:K4901-25
507328BK
507233
507227
130130
507228
507327-1 115033
115034
507161
126308BU
3x8mm Steel Button
Head Screw

O
N
O
126310BU
3x10mm Button Head
Screw
507162
126310BU
507164
507163
507162
507164
126308
126310
126306
115016BK
507422
126308
111007ST
507164
507162
126212BU 126212BU
15
126306
3x6mm Steel FH
Screw
126308
3x8mm Steel F.H.
Screw
126310
3x10mm Steel FH
Screw
111007ST
3mm Steel Locknut
126212BU
2X12mm BH Screw

O
O
111160BK
111160BK
16
111160BK
4mm Special Wheel
Lock Nut-Black
126308SE
3x8mm Steel Flat
Head Screw

Stiff Setting
P
Motor Position
Setting
P
130114
126306
126306
126314
507332
507333
126318
126306
130114
130114
17
126306
3x6mm Steel FH
Screw
126318
3x18mm Steel Button
Head Screw
126314
3x14mm Steel Button
Head Screw

Spur 1.9
Pinion
DRIVE RATIO
TIRES
ESC Timing Turbo Timing
ESC
2.3 mm 2.5 mm Aluminum 2 mm 2.3 mm 2.5 mm
wt
Spool
wt
Diff.
High
Low
Diff.
High
Low
Spool
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+2 mm
0 mm
- 2 mm
ARM MOUNT +2 mm
0 mm
- 2 mm
ARM MOUNT
+2 mm
0 mm
- 2 mm
ARM MOUNT
+2 mm
0 mm
- 2 mm
ARM MOUNT
Inside (0mm)
Outside (1mm)
mm
Motor Position :
3D Flex
Screw

Spur 1.9
Pinion
DRIVE RATIO
TIRES
ESC Timing Turbo Timing
ESC
1.1
400
K-factory 27 K-factory 25
400
1.1
110 33
wt
Spool
wt
Diff.
High
Low
Diff.
High
Low
Spool
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+0.4 mm
+0.2 mm
0 mm
- 0.2 mm
- 0.4 mm
ARM HOLDERS
+2 mm
0 mm
- 2 mm
ARM MOUNT +2 mm
0 mm
- 2 mm
ARM MOUNT
+2 mm
0 mm
- 2 mm
ARM MOUNT
+2 mm
0 mm
- 2 mm
ARM MOUNT
2.3 mm 2.5 mm Alumn. 2 mm 2.3 mm 2.5 mm
186 189 1000
-3 °
5.5
51.2
4
1
2
1
-1.5 °
+1 °
4 °
-2 °
51.3
6
1
1
1
0.75 1
0.75
0.75
0.75