Techly IDATA EXT-676E User manual

P/N: IDATA EXT-676E
(transmitter + receiver)
8059018362312
EN User's Manual
IT Manuale d’istruzione
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6
Technical features
70
extension
M
connection
1 1
TO
a/v series

HDMI EXTENDER BY CAT.6
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
IMPORTANT SAFETY INSTRUCTION
INTENDED USE
We do not permit using the device in other ways like
described in this user’s manual. Use the product only
in dry interior rooms. Not attending to these
regulations and safety instruction might cause fatal
accidents, injuries, and damages to persons and property. The
manufacturer/supplier assumes no liability for damages caused by
failure to comply with the intended use.
To reduce risk of electric
shock, this product should
ONLY be opened by an
authorized technician when
service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product
to water or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• Your product is not a toy and is not meant for children, because it
contains small parts which can be swallowed and can injure when
used inappropriately!
• Please install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for example
by dropping or stumbling.
• Please remove the packing materials, because children may cut
themselves on them while playing. Furthermore, there is a risk of
swallowing and inhalation of incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which
might come into contact with water. Do not install the product close
to openings of air conditioners, or at places with an excessive
amount of dust or smoke.
• Do not install the product at places subject to vibration, or
oscillation
• Do not modify and alter the product and any accessories! Do not
use any damaged parts.
• Keep enough space around all devices for a good ventilation and
free motion and to avoid damages.
• Do not mix up HDMI to RJ45 transmitter and RJ45 to HDMI receiver
before installation
EN - 2
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6

• Do not unplug the deive when it is in using, keep distance from
flammable and explosive devices.
• Power supply: DC 5V/2A, usage only the supplied power unit, do
not use the power supply if it is damaged. Make sure specification
matched if using 3rd party adapters.
• Static electricity will cause damage of the device, please do ESD
protection when using the device.
FEATURES
This HDMI Extender includes a transmitter unit and a receiver unit, allows
HDMI signal to be transmitted up to 70 meters at 4K resolution using a
CAT6/6A/7 network cable. It is perfect for outdoor advertising, video clips,
monitor system, home entertainment, and conference, etc.
SPECIFICATIONS
• Zero latency.
• 4K@60Hz HDMI signal can be transmitted 70 meters through a
CAT6/6A/7 network cable.
• The receiver can extract the digital audio from the transmitter
through the S/PDIF port.
• Supports audio formats (Dolby TrueHD 7.1CH/Dolby Digital
5.1CH).
• Supports HDR(YUV4:4:4), EDID passback.
• Transmitter support one HDMI loop-out.
• Support bi-directional IR passback function (20~60KHz).
• Lightning Protection, Surge Protection, ESD Protection.
PACKAGE CONTENTS
Make sure your package includes the following items:
• Transmitter Unit *1
• Receiver Unit *1
• Power supply DC5V/2A *2
• IR blaster extension cable *1
• IR receiver extension cable *1
• Mounting brackets *8
• Screw *18
• User Manual
INSTALLATION REQUIREMENTS
• HDMI source device like computer graphic cards, DVD, PS3, HD
monitoring equipment etc.
• HDMI display device like SDTV, HDTV, projector with HDMI port.
• UTP/STP CAT6/CAT6A/CAT7 cable. Follow standard IEEE-568B.
It is recommended to select a network cable with less loss and
crosstalk.
EN - 3
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6

INTERFACES
Transmitter (TX)
① ② ③
④ ⑤ ⑥ ⑦ ⑧
① ② ③ ④
⑤ ⑥ ⑦ ⑧ ⑨
① ② ③
④ ⑤ ⑥ ⑦ ⑧
① ② ③ ④
⑤ ⑥ ⑦ ⑧ ⑨
EN - 4
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6
1 Reset button Press to restart the device
2
RJ45 signal
output Connect with network cable
3
Power/Signal
indicator
When there is power and no HDMI signal, the
indicator will flash, when there is HDMI signal, the
indicator will light solid blue
4 DC5V input Connect with DC5V/2A power adapter
5 HDMI output Connect with HDMI display device
6 HDMI input Connect with the source device
7 IR in
Connect with IR receiver extension cable, please
make sure the remote control used is within the
effective range
8 IR out Connect with IR blaster extension cable, please get
closer to the source device while using

Receiver (RX)
① ② ③
④ ⑤ ⑥ ⑦ ⑧
① ② ③ ④
⑤ ⑥ ⑦ ⑧ ⑨
① ② ③
④ ⑤ ⑥ ⑦ ⑧
① ② ③ ④
⑤ ⑥ ⑦ ⑧ ⑨
EN - 5
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6
1 Reset button Press to restart the device
2 Audio switch Choose to decode audio from HDMI or ARC output
from fiber optic interface
3
RJ45 signal
input Connect with network cable
4
Power/Signal
indicator
When there is power and no HDMI signal, the
indicator will flash, when there is HDMI signal, the
indicator will light solid blue
5 DC5V input: Connect with DC5V/2A power adapter
6 S/PDIF out Output digital audio signal
7 HDMI output Connect with HDMI display device
8 IR in
Connect with IR receiver extension cable, please
make sure the remote control used is within the
effective range
9 IR out Connect with IR blaster extension cable, please get
closer to the source device while using

INSTALLATION PROCEDURES
Connection
one-to-one
Follow the standard of IEEE-568B. It is recommended to select a
network cable with less loss and crosstalk.
1-Orange/white
2-Orange
3-Green/white
4-Blue
5-Blue/white
6-Green
7-Brown/white
8-Brown
Video Source
TX RX
HDMI IN
HDMI OUT
ARC
HDMI Display
HDMI Display
Speaker
Network Cable
EN - 6
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6

CONNECTION INSTRUCTION
1) Connect the source device to the HDMI in port of the transmitter
with an HDMI cable, and connect the HDMI out port of the receiver
to the display device with another HDMI cable.
2 ) Connect the CAT out port of the transmitter and the CAT in port of
the receiver via a network cable (CAT6/CAT6A/CAT7)
3 ) If using HDMI loop out, connect the display device to the HDMI
OUT port of the transmitter
4 ) Plug the power supply into the device to get started.
NOTE: It is recommended to use a length range within 2~70m
network cable. If the cable is too short, there may be no display
output because the signal is too strong. If the cable is too long, the
output may be with poor quality.
IR USER GUIDE
1) IR blaster extension cable should plug in the IR OUT port of the
transmitter and receiver, IR receiver extension cable should plug in
the IR IN port of the transmitter and receiver.
2 ) The emitter of the IR blaster extension cable should be as close as
possible to the IR receiving window of the source device.
3 ) Face the receiving head of the IR receiver extension cable to the
user for convenient remote control.
FAQ
Q: There is no output on screen when all connections are
correct?
A: 1) Please make sure the HDMI cables supports 4K×2K if the
output signal from the source device is 4K×2K resolution.
2) Please check and make sure the network cable insert to the
RJ45 port well.
3) Restart the transmitter or receiver by pressing the reset
button.
Q: Black screen happened on the display/monitor?
A: 1) Check if the length of the cable is within the specified range.
2) Reset the transmitter to re-built the connection.
Q: The display shows unusual color or no sound?
A: 1) Reset the transmitter or receiver to re-built the connection.
2) Check if the HDMI cables are connected well.
3) Reconnect the network cable.
EN - 7
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6

In compliance with EU Directive WEEE this product is marked with this symbol. It
means that used electrical and electronic products should not be mixed with general
household waste. There is a separate collections system for these products in
compliance with WEEE directive, otherwise contaminative and hazardous substances
can pollute the environment.
With the CE sign, Techly®ensures that the product is conformed to the basic European
standards and directives
SPECIFICATION
EN - 8
WWW.TECHLY.COM
HDMI EXTENDER
BY CAT. 6
Power Supply Voltage/Current DC5V/2A
Power Consumption TX<4W RX<4W
HDMI Performance
and Interface
HDMI Compliance HDMI 2.0
HDCP Compliance HDCP 2.2
HDMI Resolution
480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz,
3840x2160@24/25/30/50/60Hz
4096x2160@24/25Hz, 1280x960,
1280x800, 1280x768, 1680x1050,
1360x768, 1366x768, 1600x900,
1024x768, 800x600
Supports audio
formats
LPCM/DTS-HD/DTS-Audio/Dolby TrueHD
7.1CH/ Dolby Digital 5.1CH
Input and Output
TMDS signal 0.7~1.2Vp-p(TMDS)
Input and output DDC
signal 5Vp-p(TTL)
Input cable length ≤8m(AWG24)
Output cable length ≤8m(AWG24)
Transmission
Distance CAT6/6A/7 ≤70m
Protection Level
Electrostatic
Protection of the
whole machine
1a Contact discharge level 3
1b Air discharge level 3 Implementation
of the standard: IEC61000-4-2"
Operating
Environment
Working Temperature -20~60°C
Storage Temperature -30~70°C
Humidity (no
condensation) 0~90%RH
Body Properties
Dimension 106.0(L) x 99.0(W) x 26.2(H)mm
Material Aluminium alloy material + crystal panel
Color black
Weight TX: 210g RX: 210g

EXTENDER HDMI SU CAVO CAT. 6
Gentile Cliente
Grazie per aver acquistato questo prodotto. Per ottenere il massimo
delle prestazioni nella salvaguardia della sua sicurezza, le consigliamo
di leggere con attenzione il presente manuale prima di collegare
e mettere in funzione il prodotto. Tenga sempre a disposizione il
presente manuale per ulteriori esigenze future.
IMPORTANTI INFORMAZIONI SULLA SICUREZZA
• Questo prodotto non è un giocattolo e non è pensato per i bambini,
contiene piccolo parti che potrebbero venir ingerite o inalate e
provocare danni se non utilizzato correttamente!
• Installare l’apparecchio e le periferiche ad esso collegate in modo
che non possano provocare danni a persone e oggetti come far
inciampare o causare cadute.
• Rimuovere tutti gli imballi che potrebbero causare soffocamento se
manipolati da bambini.
• Evitare di installare l’apparecchio in luoghi con temperature o
umidità eccessive, o luoghi che potrebbero venire a contatto con
l’acqua. Non installare vicino a bocchette dell’aria condizionata o in
luoghi che presentano polvere o fumi eccessivi.
• Non installare il prodotto in luoghi soggetti a vibrazioni o oscillazioni.
• Non modificare o alterare il prodotto e i suoi accessori! Non
utlizzare parti danneggiate.
• Mantenere sufficiente spazio attorno alla periferica per garantire
una buona ventilazione, permettere una maggiore libertà di
movimento ed evitare danni.
• Non invertire il trasmettitore da HDMI a RJ45 con il ricevitore da
RJ45 a HDMI prima dell'installazione.
USO PREVISTO
Non è consentito l’uso dell’apparecchio in modi diversi
da quello indicato nel presente manuale. Utilizzare il
prodotto solo in luoghi interni asciutti. Non rispettare le
istruzioni e le precauzioni di sicurezza riportate nel
presente manuale potrebbe causare incidenti mortali, lesioni e
danni a persone e cose. Il costruttore/fornitore non risponde dei
danni risultanti da un utilizzo non conforme all’uso previsto.
Per ridurre il rischio di
shock elettrico, questo
prodotto dovrebbe essere
aperto SOLO da un tecnico
autorizzato quando è necessario ripararlo. Scollegare il prodotto
dall’alimentazione e da altri apparecchi se dovesse esserci un
problema. Non esporre il prodotto ad acqua o umidità.
ATTENZIONE
RISCHIO DI SCOSSE ELETTRICHE
NON APRIRE
WWW.TECHLY.COM
IT - 9
EXTENDER HDMI
SU CAVO CAT. 6

• Non scollegare la periferica durante l’uso, mantenere il prodotto
distante da materiali infiammabili ed esplosivi.
• Alimentatore: DC 5V/2A, utilizzare solo l’alimentatore fornito nella
confezione. Non utilizzare se l’alimentatore risulta danneggiato. Se
si usa un alimentatore di terze parti verificare che le specifiche di
questo coincidano con l'alimentatore originale.
• L'elettricità statica può danneggiare il dispositivo, si prega di usare
una protezione contro le cariche elettrostatiche quando si utilizza il
dispositivo.
CARATTERISTICHE
Questo Extender HDMI è costituito da un trasmettitore e da un ricevitore
e permette di estendere il segnale HDMI fino a 70m ad una risoluzione
di 4K utilizzando un cavo di rete di Cat.6/6A/7. Rappresenta la soluzione
ideale per la pubblicità esterna, videoclip, sistema di monitoraggio, home
entertainment e conferenze, ecc.
SPECIFICHE
• Zero latenza
• Il segnale 4K@60Hz può essere trasmesso fino a 70 metri attraverso
un cavo di rete Cat.6/6A/7
• Il ricevitore può estrarre l'audio digitale dal trasmettitore tramite la
porta S/PDIF
• Supporta Dolby Audio (Dolby TrueHD 7.1CH/Dolby Digital 5.1CH)
• Supporta HDR (YUV4:4:4), EDID passback
• Il trasmettitore supporta un loop-out HDMI
• Supporta funzione IR pass-back bidirezionale (20 ~ 60KHz)
• Protezione contro i fulmini, protezione contro le sovratensioni,
protezione antistatica
CONTENUTO DELLA CONFEZIONE
Verificare che nella confezione siano inclusi i seguenti elementi:
• Trasmettitore *1
• Ricevitore *1
• Alimentatore DC5V/2A *2
• Prolunga IR blaster *1
• Prolunga ricevitore IR *1
• Staffe di montaggio *8
• Viti *18
• Manuale d'istruzione
REQUISITI PER L'INSTALLAZIONE
• Sorgente HDMI come schede grafiche per computer, DVD, PS3,
telecamere HD...
• Schermo HDMI come SDTV, HDTV, proiettore con porta HDMI
WWW.TECHLY.COM
IT - 10 EXTENDER HDMI
SU CAVO CAT. 6