2
Model: TX-196/7/8 Article No. 5005/6/7, 11/2022
Warnings
●The device is intended exclusively for private and not for
commercial use. ●Only use this device as described in this user
manual. ●Protect the product from dirt, moisture and overheating
and use it in dry rooms only. • Do not drop the product and do not expose
it to any major shocks. • Do not operate the product outside the power
limits given in the specifications. •Do not modify the device in any way.
Doing so voids the warranty. • Do not continue to operate the device if it
becomes visibly damaged. • Use the product for its intended purpose only.
• Keep this product, as all electrical products, out of the reach of children!
• Do not use the product in the immediate vicinity of heaters or other heat
sources or in direct sunlight. • Lay all cables so that they do not pose a
tripping hazard. • Do not bend or crush the cable. • Always pull directly on
the plug when disconnecting the cable, never on the cable itself. • Dispose
of packaging material immediately according to locally applicable
regulations. • The product is intended for indoor use only. • Use the item
only in moderate climatic conditions. • Do not use the product in areas
where the use of electronic devices is not permitted. • Do not use the
product in moist environments and avoid splashes. Children are not
allowed to play or use the equipment. ●Do not let children play with plastic
bags, foils or small parts. ●There is a danger of swallowing or suffocating!
●The device is intended only for private use. ● Always disconnect the item
from the mains when not in use
Note Before connecting a terminal device, check whether the power
output of the charger can supply sufficient power for the device. •
Ensure that the power of the connected terminal device does not exceed
the max. rated power. • Please refer to the instructions in the operating
manual of your terminal device. •Plug & go: No manual setup necessary,
just connect and start: Voltage and power are automatically configured
by Power Delivery/QC 3.0, 2.0. • For efficient and optimised charging,
the Power Delivery (PD)/QC 3.0, 2.0 function must be supported by your
terminal device. • With the large quantity of PD/QC-enabled terminal
devices with different firmware versions, it can happen that the function
is not fully supported.
Product overview /Specifications