TechniSat DigitRadio 225 User manual

Important Safety Instructions
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, fire, etc.:
1. Do not place unit near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
2. Do not block any ventilation openings of unit.
3. The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the unit.
4. Do not place any heavy loads onto the unit, and do not step on it, the load may fall and cause
serious injury to the unit.
5. Please read Rating Labels at the rear of unit for power input and other safety information.
6. This unit is intended to be used only with the power supply provided.
7. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at any point where they exit from the unit.
8. Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and pull
straight out from the outlet.
9. Repair or replace all electric service cords that have become frayed or otherwise damaged
immediately. Do not use a cord that shows cracks or abrasion damage along its length, the
plug, or the connector end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other outlet
unless the blades can be fully inserted to prevent blade exposure.
11. During lightning or raining days, unplug the unit for additional protection during
thunderstorms or when the unit is not used for prolonged periods. This will prevent damage
to the unit from lightning and power surges.
12. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
13. Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
14. The built-in battery must be replaced by the manufacturer, its service agent, or similarly
qualified persons in order to avoid a hazard.
15. Do not attempt to carry out any service work yourself. By opening or removing the cabinet,
you may be exposed to dangerous voltage or other hazards. Any service work should be

carried out by qualified technicians.
16. The normal function of the product may be disturbed by strong Electro-Magnetic Interference.
If so, simply reset the product to resume normal operation by following the instruction manual.
In case the function could not resume, please use the product in other location.
17. The means of disconnecting this apparatus from the mains supply is plug of adaptor. The
disconnect device shall remain readily operable.
18. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit
switched on while unattended for long periods of time, e.g. overnight, while on holiday or
while out of the house. Switch it off and disconnect the mains plug from the mains socket.

Contents
Important Safety Instructions .......................................................................................................... 2!
Contents.......................................................................................................................................... 4!
Your radio ....................................................................................................................................... 5!
Getting Started................................................................................................................................ 6!
DAB Mode....................................................................................................................................... 8!
Scanning Stations.................................................................................................................... 8!
Manual Tune............................................................................................................................ 8!
DRC (Dynamic Range Control) value...................................................................................... 9!
Selecting another Station......................................................................................................... 9!
Secondary Service................................................................................................................... 9!
Prune Invalid............................................................................................................................ 9!
Viewing Station Information................................................................................................... 10!
Storing Preset Stations .......................................................................................................... 10!
Recalling a Preset Station ..................................................................................................... 10!
FM Mode....................................................................................................................................... 11!
Selecting FM Mode................................................................................................................ 11!
Scan settings ......................................................................................................................... 11!
Audio Settings........................................................................................................................ 11!
Viewing Station Information................................................................................................... 12!
Storing Preset Stations .......................................................................................................... 12!
Recalling a Preset Station ..................................................................................................... 12!
Bluetooth Mode............................................................................................................................. 13!
NFC (Near Field Communication)................................................................................................. 13!
Aux in Mode.................................................................................................................................. 14!
General Operation ........................................................................................................................ 15!
Setting Sleep ......................................................................................................................... 15!
Setting Alarm ......................................................................................................................... 15!
Setting Equaliser.................................................................................................................... 16!
Setting Time........................................................................................................................... 16!
Setting Backlight .................................................................................................................... 16!
Setting Language................................................................................................................... 17!
Factory Reset ........................................................................................................................ 17!
Software Upgrade.................................................................................................................. 17!
Viewing SW Version .............................................................................................................. 17!
Troubleshooting ............................................................................................................................ 18!
Specifications................................................................................................................................ 19!

Your radio
1. VOLUME/knob
lPress to switch unit on or standby.
lTurn to adjust volume level.
2. INFO/MENU button
lPress to view station information when a
program is playing.
lPress and hold to display or exit menu screen.
3. MODE button
Press to switch among DAB, FM, Bluetooth and
Aux in mode.
4. PAIR button
lPress to select a paired Bluetooth device from
device list.
lPress and hold to disconnect Bluetooth
connection.
5. Display
6. button
Press and hold to fast reverse current playing track
in Bluetooth mode.
7. /PRESET button
lPress to pause or play current playing track in
Bluetooth mode.
lPress and hold to save preset station.
lPress to recall preset station.
8. button
lPress to skip to next track in Bluetooth mode.
lPress and hold to fast forward current playing
track in Bluetooth mode.
9. SCROLL&SELECT/SNOOZE knob
lTurn to browse options.
lPress to confirm selection.
lPress to activate snooze function when alarm
sounds.
10. Handle
11. NFC sensor
12. UPDATE PORT – For service professional only.
13. Headphones socket
14. AUX IN socket
15. DC IN socket
16. POWER switch
17. DAB/FM antenna

Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
nMain unit
nPower adaptor
nInstruction manual
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
nWhere the unit will be exposed to direct sunlight.
nWhere the unit will be close to heat radiating sources.
nWhere the humidity is high and ventilation is poor.
nWhere it is dusty.
nWhere it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to adjust the position of the radio and /or antenna to achieve the best
signal.
Turning the Unit On/Off
Connect the plug at the end of power adaptor cable to the DC IN socket at the rear of the unit.
Then insert the power adaptor into the mains socket.
Slide POWER switch to POWER ON side, unit will on and then start battery charging. Keep mains
power connecting and charge the built-in battery for 12 hours before first time use.
Press the VOLUME/ knob to switch unit standby.
To turn off unit completely, slide POWER switch to POWER OFF side and disconnect the power
adaptor from the mains socket, especially you attempt to not use radio for long periods of time.
Caution: the built-in battery must be replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid a hazard.
Volume Control
Adjust the radio volume by turning VOLUME/ knob. Turn anti-clockwise to decrease volume
and turn clockwise to increase volume.

Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphonessocket
is located at the rear of this unit. Headphones are not supplied with this radio.
Turn down the volume before connecting headphones. Slowly raise the volume with the
headphones on until you reach your desired level.
Caution: long-term exposure to loud music may cause hearing damage. It is best to avoid
extreme volume when using headphones, especially for extended periods of time.
Automatically Setting the Clock
The clock can be set and updated automatically if is received DAB / FM signals in your location. In
order for the clock to synchronise to the current local time you must leave it on a DAB or FM
station for a short period of time. You can also choose how you would like to keep the clock up to
date from the DAB or FM radio signals. Press and hold INFO/MENU button > Time > Auto
update.

DAB Mode
When you turn on the radio it will automatically search and store all the available stations. You
should conduct an additional Full Scan to ensure all stations are picked up and stored. It is also
recommended every few months to run a new scan to pick up any new DAB/DAB+ that may have
begun broadcasting after purchasing your DAB radio.
1. For initial use, radio will carry out a full scan and store stations list in memory
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric
order. The first station in the list will be automatically selected to broadcast, press
SCROLL&SELECT/SNOOZE knob to broadcast.
@Note:if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your
radio to a stronger signal area.
Scanning Stations
Press and hold INFO/MENU button,turn SCROLL&SELECT/SNOOZE knob to select ‘Full scan’,
and then press SCROLL&SELECT/SNOOZE knob to full scan.
Manual Tune
This can help you when adjusting your antenna or when adding stations that were missed while
auto tuning.
1. Press and hold INFO/MENU button,turn SCROLL&SELECT/SNOOZE knob to select
‘Manual tune’, and then press SCROLL&SELECT/SNOOZE knob to confirm, the display will
show the channel number and frequency.
2. Turn SCROLL&SELECT/SNOOZE knob to select the channel you wanted, and then press
SCROLL&SELECT/SNOOZE knob to confirm. If there is a multiplex on this channel, the
multiplex name will be shown. A signal strength bargraph will be displayed
@Note: The new stations will be added to station list automatically.
3. To play the station, first press and hold INFO/MENU button twice to exit manual tune.

DRC (Dynamic Range Control) value
If you are listening to music with high dynamic range in a noisy environment (for example classical
music while cooking), you may wish to compress the audio dynamic range. This makes quiet
sounds louder and loud sounds quieter.
1. Press and hold INFO/MENU button, turn SCROLL&SELECT/SNOOZE knob to select ‘DRC’,
and then press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select 'DRC high', 'DRC low' or 'DRC off' (default),
and then press SCROLL&SELECT/SNOOZE knob to confirm.
Selecting another Station
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Auto select’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL/SELECT knob to select ‘Disable’ (default) or ‘Enable’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
a) If ‘Disable’ is selected, while a program is playing, turn SCROLL&SELECT/SNOOZE
knob to browse station list, and then press SCROLL&SELECT/SNOOZE knob to
confirm broadcasting.
b) If ‘Enable’ is selected, while a program is playing, turn SCROLL&SELECT/SNOOZE
knob to browse stations list, the station you desired will be automatically broadcast.
Secondary Service
You may see a “>>” symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are related
to the primary station. E.g. a sports station may want to add extra commentaries. The secondary
services are inserted directly after the primary station (a “<<” symbol is before the name of the
station) in the station list.
To select the secondary station, turn SCROLL&SELECT/SNOOZE knob until you find the
secondary service you want, then press SCROLL&SELECT/SNOOZE knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.
Prune Invalid
You may remove all unavailable stations from the station list.
1. Press and hold INFO/MENU button, turn SCROLL&SELECT/SNOOZE knob to select ‘Prune’,
and then press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select ‘Yes’, and then press
SCROLL&SELECT/SNOOZE knob to confirm removing all invalid stations.

Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO/MENU button repeatedly while
a program is playing to view information through DLS (Dynamic Label Segment), Signal Strength,
Program Type, Ensemble, Program Frequency, Signal Quality, Bitrate, Codec, Time and Date.
Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show
on the display.
The indicator on the signal bar shows the
minimum acceptable signal level.
@Note: Stations with signal strength below the
minimum signal level may not provide a
steady stream of audio.
Storing Preset Stations
Your radio can store up to 10 of your favourite DAB/DAB+ stations. This will enable you to access
your favourite stations quickly and easily.
1. While playing your favourite station, press and hold /PRESET button until display shows
‘Preset Store <#: (Empty) >’.
2. Turn SCROLL&SELECT/SNOOZE knob to cycle through the preset numbers 1-10.
3. Select one preset number and then press the SCROLL&SELECT/SNOOZE knob, display will
show ‘Preset # stored’.
Recalling a Preset Station
1. Press /PRESET button to show the saved preset stations.
2. Turn SCROLL&SELECT/SNOOZE knob to select the preset station you want to play and
then press the SCROLL&SELECT/SNOOZE knob to confirm.
3. The display will show ‘Preset Empty’ if the preset station isn’t allocated.

FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise,
the last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, turn
SCROLL&SELECT/SNOOZE knob clockwise or anticlockwise to change the frequency by
0.05MHz per step.
4. To automatically scan, while FM frequency shows up, turn SCROLL&SELECT/SNOOZE
knob clockwise or anti-clockwise and then pressSCROLL&SELECT/SNOOZE knob, your
radio will skip forward or backward until it reached the next available station.
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press and hold
INFO/MENU button, turn SCROLL&SELECT/SNOOZE knob to select ‘Scan setting’, and
then press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select 'Strong stations only' (default), and then
press SCROLL&SELECT/SNOOZE knob to confirm.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press and hold INFO/MENU button, turn
SCROLL&SELECT/SNOOZE knob to select ‘Audio setting’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select ‘Forced mono’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.

Viewing Station Information
There is a variety of station information transmitted by broadcast, and this radio offers a
convenient way for you to view them.
To view currently playing station information, press INFO/MENU button repeatedly the display will
show the information through Radio text, Program Type, Program Name, Audio info, Time and
Date.
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations. This will enable you to access your
favourite stations quickly and easily.
1. While playing your favourite station, press and hold /PRESET button until display shows
‘Preset Store <#: (Empty) >’.
2. Turn SCROLL&SELECT/SNOOZE knob to cycle through the preset numbers 1-10.
3. Select one preset number and then press the SCROLL&SELECT/SNOOZE knob, display will
show ‘Preset # stored’.
Recalling a Preset Station
1. Press /PRESET button to show the saved preset stations.
2. Turn SCROLL&SELECT/SNOOZE knob to select the preset station you want to play and
then press the SCROLL&SELECT/SNOOZE knob to confirm.
3. The display will show ‘Preset Empty’ if the preset station isn’t allocated.

Bluetooth Mode
Pair the unit with a Bluetooth device to listen to music:
1. Press the MODE button to select Bluetooth mode.
2. The display will show 'Bluetooth discoverable…'.
3. Activate your Bluetooth device and select the search mode.
4. ‘DigitRadio 225’ will appear on your Bluetooth device.
5. Select ‘DigitRadio 225’ and enter “0000” for the password if necessary.
6. ‘BT connected: Your Bluetooth Device’ will show on the display when connection is
successful.
7. While a track is playing, you can:
a. Press button once to resume to the beginning of track, and then press button
once again to skip to previous track; press and hold button to fast reverse current
playing track.
b. Press /PRESET button to pause or play current playing track.
c. Press button to skip to next track; press and hold button to fast forward current
playing track.
8. To disconnect current Bluetooth connection, press and hold PAIR button for 2 seconds.
9. To connect to another paired Bluetooth device, press PAIR button repeatedly to select the
Bluetooth device you desired, and then press SCROLL&SELECT/SNOOZE knob to confirm
connecting.
@Note: the unit will automatically switch to standby mode after 10 minutes if the source device
is disconnect, switched off or the volume is too close to mute.
NFC (Near Field Communication)
NFC enables you pair and connect with Bluetooth devices in an easy way.
1. Press MODE button repeatedly to select Bluetooth mode.
2. Make sure that your NFC is turned “On” on your mobile device.
3. Hold your mobile device about 2cm close to NFC sensor at right side panel for receiving an
auto-connection between your mobile device and radio.
4. Your device then will turn-on Bluetooth automatically and will pair your device with radio. No
additional settings are necessary.

Aux in Mode
AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to
your external audio device through the AUX IN socket at the rear of unit.
2. Connect power adaptor to mains socket, press VOLUME/ knob to switch unit on.
3. Press MODE button repeatedly to select Auxiliary Input mode.
4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device as well
is recommended.
@Note: the unit will automatically switch to standby mode after 10 minutes if the source device
is disconnect, switched off or the volume is too close to mute.

General Operation
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Sleep’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select a sleep time, and then press
SCROLL&SELECT/SNOOZE knob to confirm. The sleep icon will show on the display.
The sleep time options: Sleep off/15/30/45/60/90 minutes
3. To turn the sleep function off while the sleep timer is still counting down, select 'Sleep' option,
turn SCROLL&SELECT/SNOOZE knob to select 'Sleep off'.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Alarm’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select ‘Alarm 1 Setup’ or ‘Alarm 2 Setup’, and
then press SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to select options, and then press
SCROLL&SELECT/SNOOZE knob to confirm the setting.
Alarm states:
On or Off
Alarm time:
On Time: 00:00 (manually set up the time )
Alarm duration time:
15/30/45/60/90 minutes
Alarm source:
Buzz, DAB or FM
(if the wake-up mode is DAB and the DAB signal strength is
low, the buzzer alarm will be triggered.)
Last listened:
Last listened or saved preset station (not available for
Buzz mode).
Alarm active day:
Daily, Once, Weekends or Weekdays
Alarm volume:
turn VOLUME / INFO knob to set the alarm volume
4. When the display shows 'Alarm Saved', the alarm setting is successful. or will show
on the display.
5. To temporarily switch off alarm, press SCROLL&SELECT/SNOOZE knob repeatedly to
set snooze time for 5, 10, 15 or 30 minutes in turn. The unit will go to standby and snooze
time will show on the display.
@Note: the options of Snooze time depends on which alarm duration time you selected.

Alarm duration time
Snooze time
15 minutes
5 or 10 minutes
30 minutes
5, 10 or 15 minutes
45/60/90 minutes
5, 10, 15 or 30 minutes
6. To turn off alarm, press VOLUME/knob when the alarm sounds and then unit will go to
standby.
7. To cancel Alarm, refer to steps1-3 to enable alarm ‘Off’.
Setting Equaliser
This feature enables you to set a sound equalization profile. The equalization setting will change
the tone of the sound from your radio.
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Equaliser’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse through ‘Treble’ and ‘Bass’, and then
press SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to set the level of Treble and Bass among ‘-3’ to
‘+3’, and then press SCROLL&SELECT/SNOOZE knob to confirm.
Setting Time
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Time’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select options, and then press
SCROLL&SELECT/SNOOZE knob to confirm the setting.
Set Time/date:
Manually set-up both Time and Date
Auto update:
‘Update from Any’, ‘Update from DAB’, ‘Update
from FM’ or ‘No update’
Set 12/24 hour format:
‘Set 24 hour’ or ‘Set 12 hour’
Set date format:
‘DD-MM-YYYY’ or ‘MM-DD-YYYY'
3. Then setting time according to your personal preference.
Setting Backlight
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Backlight’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select ‘Power on' or 'Standby', then press
SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to select backlight level, and then press
SCROLL&SELECT/SNOOZE knob to confirm the setting.

Power on
lHigh
lMedium
lLow
Standby
lHigh
lMedium
lLow
Setting Language
This feature enables you to change menu language. There are four languages available: English/
French/Italian/German.
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Language’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select your language, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
Factory Reset
Doing a factory reset clears all user defined setting, replacing them with the original default values,
so time/date, DAB station list and preset stations are all lost.
1. Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to
select ‘Factory Reset’, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select ‘Yes’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
Software Upgrade
Please leave this for service professional!
If you selected Software Upgrade menu accidentally, please select 'No' to exit this option.
Viewing SW Version
This information may be requested when dealing with technical support issues.
Press and hold INFO/MENU button, and then turn SCROLL&SELECT/SNOOZE knob to select
‘Info’, press SCROLL&SELECT/SNOOZE knob to confirm. The software version will show on the
display.

Troubleshooting
If a problem occurs, it may often be due to something very minor. The following table contains
various tips.
Problem
Solution
How long do I charge the
battery before first use?
lKeep mains power connecting and charge the battery for
12 hours before first time use.
Does my unit use battery
when on standby?
lUnit use battery on standby if mains power is not
connected.
Is it safe to use power
adaptor together with the
battery?
lMains power is used when use power adaptor together
with the battery and the charge current will be cut off by
protection circuit once battery is fully charged.
No Power.
lEnsure the mains cable is properly connected or battery
power is not used up.
lMake sure that the unit is turned on.
The unit does not respond
when pressing any buttons.
lThe unit may freeze up during use. Switch the unit off
and then on again to reset it.
Poor radio reception.
lMake sure the antenna is fully extended.
lElectrical interference in your home can cause poor
reception. Move the unit away from them (especially
those with motors and transformers).
Desired station not found.
lWeak signal. Search manually.
I cannot find “DigitRadio
225” on my Bluetooth
device.
lEnsure the Bluetooth function is activated on your
Bluetooth device.
lRe-pair the unit with your Bluetooth device.
If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect
it again.

Specifications
Items
Specifications
Description:
DAB/DAB+ and FM digital radio with Bluetooth
Frequency Range:
FM: 87.5-108 MHz
DAB/DAB+: 174.928-239.200 MHz
Power Requirements:
AC Input: 110-240V~, 50-60 Hz
DC Output: 12V, 2000mA
(please use our provided adaptor)
Battery:
7.4V 5000mAh
Audio Output Power:
5W rms x 2
Power Consumption:
Operation: 24W (Max)
Standby: < 1W
Dimension (W x D x H):
260mm x 105mm x 167mm
This symbol on the product or in the instructions means that
your electrical and electronic equipment should be disposed
at the end of its life separately from your household waste.
For more information, please contact the local authority or
your retailer where you purchased the product.