TechniSat TechniStar S2 User manual

Please aim the remote control
toward the decoder and operate slowly.
If the decoder fails to respond properly,
we suggest replacing the existing set
of batteries with new ones.
How to re-tune to the new frequency of JSTV HD
TechniSat TECHNISTAR S2
Our frequency has been updated.
If you have a TechniSatTECHNISTAR S2, please follow the instructionsbelow to add JSTV HD channels to your decoder.
Number Keys
OK
Blue
矢印ボタ
＜＜Buttons you need＞＞
Arrow
MENU
Yellow
Green
If your decoder is currently connected to the TV with a SCART cable, connecting with a HDMI cable will allow you to watch JSTV with a higher resolution.
Please note that changing cables means you need to choose a different TV input channel such as HDMI 1.

How to edit the channels
(This process will take approximately 5 minutes)
1Press the Menu button on your remote control to show the Main menu on your screen.
2Using the arrow button, select TV list organizer(fourth item on the list) and press the OK button.
3Whenthe TV list organizer menu screen appears, make sure the cursor is on the right side of the screen.
If the cursor is on the left side, press the green button and move the cursor to the TV list on the right.
4Using the arrow buttons on your remote control, move the cursor to the channel JSTV 1 HD.
5Press the yellow button on your remote control to displaythe triangle mark next to the channel name.
6Press the number 1 button, then the OK button on your remote control to move JSTV 1 HD as channel 1.
The triangle mark will disappear when the transaction completed.

7Repeat step “5” and “6” to move JSTV 2 HD as channel 2.
Press Menu button to save your settings and exit the Main menu.
Now, you have successfully added the JSTV channels as No.1 and No.2 on your TV list.
Please follow the instruction below to remove the old channels.