TechniSat VIACCESS DigiBox VIACCESS User manual

Integrated VIACCESS deco-
ding unit. Receives free-to-air
as well as VIACCESS enco-
ded/scrambled satellite pro-
grammes.
+++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++
+++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++
Instruction Manual
DigiBox VIACCESS
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 1

On/Standby
Numeric keypad
Programme list on/off
Back
Menu on/off
Sound on/off
EXTERNAL
Language selection
Programme -
Information (blue)
Delete (red)
Programme informa-
tion (yellow)
Transponder informa-
tionen (green)
Volume +
Programme +
TV/Radio mode
EPG
MONO1/MONO2
OK
Volume -
Arrow right
Arrow left
Arrow up
Arrow down
Remote control
FERNBEDIENUNG V1.qxd 20.09.00 11:30 Seite 2

Contents
1 Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 5
3 Important - please read first . . . . . . . . . . . . . . . . .6
Disposal instructions . . . . . . . . . . . . . . . . . . . . . .6
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . .7
4 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1 Mains connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.2 External unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.3 Connecting to a TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.3.1 Via SCART cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.3.2 Via HF cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.4 Adjusting the UHF output channel . . . . . . . . . . . . . . . . . . . .10
4.5 Connecting a video cassette recorder (VCR) . . . . . . . . . . . .11
4.5.1 Connecting a Super-VHS video recorder . . . . . . . . . . . . . . .11
4.6 Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.7 Serial/parallel connection/interface . . . . . . . . . . . . . . . . . . . .11
5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.1 OSD language selection . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.2 Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.3 Audio and video settings . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5.4 Adjusting to conform to external unit . . . . . . . . . . . . . . . . . . .15
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
6.1 On/off switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
6.2 Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
6.2.5 Infobox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
6.3 Receiving scrambled/encrypted programmes . . . . . . . . . . . .19
6.4 Volume adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
6.5 Selecting a different language . . . . . . . . . . . . . . . . . . . . . . .19
6.6 TV/radio switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
6.7 Going back to last/previous programme selected . . . . . . . . .20
6.8 Display clock/timer and programme information . . . . . . . . . .20
6.9 Additional programme information . . . . . . . . . . . . . . . . . . . .20
6.10 Transponder information . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
6.11 Videotext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
6.12 Display sub-titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
6.13 Electronic Programme Guide (EPG) . . . . . . . . . . .21
6.13.1 Entering EPG data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.13.2 Interrupting the data entry process . . . . . . . . . . . . . . . . . . . .21
6.13.3 Calling up the Electronic Programme Guide . . . . . . . . . . . . .21
6.13.4 Table of current contents . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.13.5 Table of contents immediately following . . . . . . . . . . . . . . . .22
6.13.6 Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
inhalt1.qxd 07.09.00 10:41 Seite 4

6.13.7 EPG functions . . . . . . . . . . . . . . . . . . . . . . . . . . .23
6.13.7.1 EPG information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
6.13.7.2 Pre-selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . .23
6.13.7.3 Activating the VCR (timer mode) . . . . . . . . . . . . . . . . . . . . .23
6.13.7.4 Overview of EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
6.13.7.5 Searching the EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
6.13.7.6 Manual programming of timer . . . . . . . . . . . . . . . . . . . . . . . .26
7Changing basic programme settings . . . . . . . . . .28
7.1 Adding/deleting programmes . . . . . . . . . . . . . . . . . . . . . . . .29
7.2 Sorting programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
7.3 Locking programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
7.4 Changing the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
7.5 Programming the Electronic Programme Guide . . . . . . . . . .31
7.6 Unlocking reception of specific programmes . . . . . . . . . . . . .33
7.7 Programme search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
7.7.1 All programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
7.7.2 Satellite programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
7.7.3 Transponders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
7.7.4 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
7.8 Factory settings/System configuration . . . . . . . .36
7.8.1 Restoring original factory settings . . . . . . . . . . . . . . . . . . . . .37
7.8.2 Delete total programme memory . . . . . . . . . . . . . . . . . . . . .37
7.8.3 Service channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
7.8.4 EPG channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
7.9 System configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
7.10 Embedded Viaccess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
8 Technical Terms . . . . . . . . . . . . . . . . . . . . . . . . .39
9 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . .42
10 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . .44
5
inhalt1.qxd 07.09.00 10:41 Seite 5

VIACCESS card reader: Insert appropriate smart card carefully into the slot (gold chip at bottom, and in direction of insertion) until it meets resi- stance
On/standby mode
LNB input SCART connection TV set
SCART connection VCR
Audio outputs
RS-232 connection/interface
HF output
Mains power
connection
Input terrestri-
al antenna
Programme selection
up/down LED display
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 2

6
3 Please read this first
NOTE:English-speaking customers - the default setting of your receiver is German.
You should go directly to Chapter 5 to change the setting to English (point 5.1
on Page 12)
> Before connecting the receiver, first check that you have received all necessary parts.
The following are included:
1 receiver 1 mains cable 1 remote control unit
1 instruction manual 1 guarantee card 2 batteries (1.5V size AAA)
> Insert the enclosed batteries in the battery compartment of the remote control unit,
ensuring the polarity is correct as indicated
> Before switching on the receiver, please first read the safety hints in Chapter 3
>Chapters 4 and 5 show you how to adjust and connect the receiver so that it con-
forms to the requirements of the external unit (dish antenna, LNB, etc.) as well as to
those of the TV set, VCR, etc. These settings have to be made only once when com-
mencing operation, and only need to be augmented when you attach additional
equipment to the set-up, or if the specifications of your external unit are changed.
>Chapter 6 describes all functions required for everyday usage, such as volume
adjustment and programme selection.
>Chapter 7 shows you ways of setting additional programmes, and of changing the
order of programmes.
> Technical terms used in the instruction manual are explained in Chapter 8.
> Technical data and specifications are to be found in Chapter 9.
>Hints on finding and correcting faults and malfunctions are described in Chapter 10.
Disposal Instructions:
The packaging of your receiver consists entirely of recyclable and re-usable materials. Plea-
se dispose of these in the manner prescribed by your local authorities ("Dual System" in Ger-
many). Please note that spent batteries (from the remote control unit) as well as general
electronic components should not be disposed of in domestic garbage, but must be disposed
of in special containers, or returned to the retail stockist, as local regulations may prescribe.
Important hints on Usage
The use of a so-called "On Screen Display" (see example of screen shots) simplifies the use
of the receiver, and makes it possible to manage with fewer buttons on the remote control
unit. All functions are displayed on the TV screen, and can be adjusted with a few clicks of
the button.
Functions that logically belong together are combined into a single "MENU".
The function selected is marked by a blue background in the relevant line. A short comment
on the selected function is shown in the lower half of the display.
Terms used in the OSD menu are shown in bold type in this instruction manual.
Example:
> Use the button MENU to open the Main Menu.
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 6

Safety Instructions
For your own safety, you should read the safety instructions carefully before switching on
your new receiver for the first time.
The manufacturer can accept no responsibility for damage caused by inappropriate handling,
or by ignoring the safety advice.
> To ensure a sufficient ventilation, place the receiver on a plain, flat underground. Do
not lay any objects on the upper surface of the receiver. This contains cooling slots,
which are essential to ensure that the heat generated inside the receiver can escape
freely.
> Do not place any burning objects e.g. burning candles on the receiver.
> Do not expose the receiver to drop and splash water. Do not place any liquid filled
objects e.g. vase on the receiver.
> The receiver should only be used in moderate climate.
> NEVER open the receiver! You are in danger of receiving an electrical shock. If it is
ever necessary to open the equipment housing this should be done only by appro-
priately trained personnel.
Equipment not in use:
During an electrical storm as well as during extended periods when the equipment is not in
use it is advisable to disconnect it from the electrical mains.
In the following cases you should disconnect the equipment
from the mains and call a specialist for assistance :
>when the mains cable or plug are damaged;
> when the equipment has been exposed to extreme damp, or when liquid has entered
the equipment;
> when there are serious malfunctions;
> if there is severe external damage to the receiver.
7
> Now select the line of text OSD LANGUAGE, by marking the appropriate line with
the aid of the arrow up/down controls.
> Confirm with OK.
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 7

8
Connecting a DVB receiver
to a satellite installation a. Connection from LNB to LNB IN connection on DVB receiver
b. Mains connection c. Connection from terrestrial antenna to antenna input (RF IN) on
DVB receiver.
d. SCART connection between a VCR and the VCR Scart connection
on the DVB receiver.
e. SCART connection between DVB receiver and the TV set. Optional: f. Connection from HF output on the DVB receiver to the HF input of
your TV set.
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 8

4 Connections
The references in bold type - a b c etc. refer to the diagram on page 8.
4.1 Mains connection
The receiver should only be connected to the mains supply after all connections with other
components and equipment have been made. This helps to eliminate the likelihood of dama-
ge to the receiver or other components.
bOnce all other cable connections have been made, connect the receiver to a mains
supply of 230 V/50 Hz, using the mains cable included.
4.2 External Installation
aUse a suitable coaxial cable to connect the LNB INPUT of the receiver to the LNB
unit of your external installation. Also note Point 5 "Installation".
4.3 Connection to a Television set
After you have connected your receiver to the TV set as described in this chapter, it may be
necessary to adjust the receiver to the TV broadcasting norm used by your TV set, before
making further adjustments and settings.
Please also note Point 5.3 (Video system).
4.3.1 By means of a Scart cable:
In order to obtain the best picture quality possible, we advise you to use a Scart cable to
connect your receiver to the TV set.
The procedure is as follows:
eConnect the receiver (SCART TV connection) with the TV set (Scart connection),
using a Scart cable. If your TV set is fitted with an appropriate connection, the set will
automatically switch to AV mode, and thus receive the satellite signal, whenever the
receiver is switched on.
4.3.2 By means of an HF connection
If your TV set is not fitted with a Scart connector, the receiver will have to be connected to
the antenna input of the TV set. If this form of connection is used, sound will only be availa-
ble in mono mode, and not in stereo.
The procedure is as follows:
fUsing a suitable TV connection cable (coaxial), connect the receiver (HF OUT) to
the antenna input connector of your TV set.
cThe cable feeding the terrestrial signal from the antenna should be connected to the
Terrestrial Antenna Input of the receiver.
Now you must tune the TV set to the transmission channel used by the receiver. Select a
free programme slot on your TV set, and select channel 38 (if necessary, refer to the instruc-
tion manual of your TV set for this).
If you do not receive a clear picture on channel 38, this may indicate that either this or a
neighbouring channel are already receiving a programme signal via the antenna. You can
check on this by temporarily disconnecting the antenna cable from the Terrestrial Anten-
na Input of the receiver. If you then temporarily receive a clear picture, you should select a
different transmission channel within the receiver's range of 21 to 69.
9
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 9

4.4 Setting the UHF Output Channel
The procedure is as follows:
> Use the Menu key to select the Main Menu
>Now select the entry Settings, marking it in blue by using the up/down arrow keys
>Confirm by pressing OK
The sub-menu Settings will be displayed.
> Now use the up/down arrow keys to mark the line Audio/Video Settings
>Confirm by pressing OK.
The sub-menu Audio/Video will be displayed
> Now select the line UHF Out Channel, marking it in blue by using the up/down
arrow keys.
> Select a free UHF channel on your TV set in the range between 21 and 69.
> Finally, use the numeric key pad to enter the new output transmission channel in
your receiver's memory.
The receiver will now transmit the signal on the UHF channel shown in the display.
Should you still experience interference on the channel selected, please repeat the
procedure until you find a suitable channel, free from interference.
10
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 10

>Once you have found a UHF channel with optimal quality, please remember to enter it
into the memory of your TV set.
You can now select further settings in the Audio/Video Settings menu, or you can
press the Menu key to return to normal operation. The selected setting will be auto-
matically stored in memory when you exit the menu.
> If your TV set is only equipped with an automatic channel scan, select any UHF chan-
nel on your receiver, then start the automatic scan run on your TV set. If necessary,
repeat this procedure until you find a suitable transmission channel (as described
above), and store the selected channel in your TV set's memory.
> It may be necessary to finish off with some fine tuning of the channel on the TV set.
4.5 Video Cassette Recorders (VCR)
dConnect the video cassette recorder to the Scart connection marked VCR on your
receiver. When the video player is set to PLAY, it will send a switching signal to the
receiver, which will transmit the video player signal to the TV set automatically.
If your video recorder is not equipped to provide this switching signal, set your recei-
ver to the external input AV1, using the EXTERNAL key on your remote control.
Pressing this key again will take you back into normal operating mode.
4.5.1 Super VHS Video Cassette Recorders
If you have a Super VHS video recorder, you can use this to make recordings in Super VHS
quality through your DVB receiver. In order to achieve this, make all the necessary settings
as described in 5.3 (Audio/video Settings)
Note: this setting applies to both the TV and VCR Scart connections of your receiver.
4.6 Amplifier
In order to achieve the best possible sound quality, the receiver can be connected to a hi-fi
amplifier. Use a suitable cable to connect the cinch outputs Audio R and Audio L of the
receiver with an input connection of your hi-fi amplifier (use either CD or AUX inputs, the
Phono connection is not suitable).
4.7 Serial Interface RS 232
The RS 232 interface can be used to update the operating software, and in order to pre-pro-
gramme the receiver via a PC.
11
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 11

5 Installation
Now that you have made all the necessary connections to and from your receiver, and have
switched it on, you may, if necessary resp. if you wish, optimise the operation of the receiver.
5.1 OSD Language
This menu heading gives you the opportunity of selecting a language of your choice, in
which the menus will be displayed. The receiver is given a default setting of German in the
factory. You have a choice of German, English, Arabian, French, Italian, Turkish, Norwegian,
Finnish, Danish, Swedish, Portuguese and Spanish.
In order to change the OSD language, please follow these steps:
> Use the Menu key to select the Main Menu
>Select the entry OSD Language (OSD-Sprache), marking it in blue by using the
up/down arrow keys.
>Confirm by selecting OK
The sub-menu OSD Language (OSD-Sprache) will be displayed
> Select the preferred language by means of the up/down arrow keys. Use the
up/down arrow keys to move the marker by one line at a time, while the
left/right arrow keys are used to scroll to the previous or the following page res-
pectively.
> Press OK to store the selected language.
> Press Back to return to the Main menu.
5.2 Basic Settings
In order to gain the optimal benefit from your DVB receiver, you can still set several individu-
al preferences.
> Press the Menu key to call up the Main Menu display.
>Use the up/down arrow keys to mark the entry Settings.
> Press OK to confirm this selection
The sub-menu Settings will be displayed.
12
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 12

>Use the up/down arrow keys to mark the entry Basic Settings.
> Press OK to confirm this selection
> The sub-menu Basic will be displayed.
> You can use the up/down arrow keys to move the marker within the menu, and to
change the individual positions as stated. When selecting a menu item, please also
note any additional screen notices.
The following settings can be made:
Parental lock:
Your receiver is provided with a security circuit to prevent use by children. Any programmes
whose reception you have blocked as per points 7.3 and 7.4 can only be received after a
four-digit PIN is entered. You can enable or disable the parental lock facility by pressing the
OK key while this entry is marked.
GMT Time Offset (hrs.)
Your receiver is provided with a clock. This is synchronised to Greenwich Mean Time by
means of satellite signals. If you do not live in the GMT time zone, you must correct the time
display with the aid of the OK key, to correspond to your local time. In Germany, standard
time is GMT + 1 hour, and Daylight Savings Time is GMT + 2 hours. When the receiver is in
stand-by mode, the time is shown on the receiver display.
Country
This function provides an automatic change-over between standard (winter) time and day-
light savings (summer) time. Mark the entry Country to select your home country, and con-
firm by pressing the OK key.
As this information is currently not broadcast by all programme providers, you should initially
select None for this setting.
> Press the key Back to return to the menu Settings, or press the Menu key to
return to normal operation. All settings selected will be automatically stored.
Searchmode
When you are on this line of the menu, decide by means of the OK key whether a program-
me search (see Point 7.7 of this instruction manual) should include only free or all (free-to-air
and encoded/scrambled) channels.
5.3 Audio/Video Settings
In order to further optimise the operation of your receiver in conjunction with your TV set, you
can make further selections in the Audio/Video settings menu.
>Press the Menu key for the Main Menu to be displayed.
> Use the up/down arrow keys to highlight the entry Settings
> Confirm this selection by pressing the OK key
The sub-menu Settings will be displayed.
13
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 13

>Now highlight the entry Audio/Video Settings, using the up/down arrow keys.
>Confirm by pressing OK
The sub-menu Settings Audio/Video will be displayed
> Use the up/down arrow keys to move the marker (blue highlighted entry) within
the menu, and to change the individual settings as indicated. When selecting an opti-
on, please also note any additional on-screen notices.
The following selections are possible:
Screen Format (TV):
Use the OK key to select either the 4:3 (standard) or 16:9 (widescreen) picture format, in
accordance with the features of your TV set. This function automatically adjusts the picture
format to the specifications of your TV set.
Language (audiosignal)
Use the OK key to select your preferred language. Where a programme is broadcast with
several language soundtracks, this feature will automatically select your preferred language,
if available.
UHF-Output Channel
See Point 4.4
SCART-Mode
Use the OK key to select either FBAS, RGB or S-VHS, in accordance with the specificati-
ons of your TV set. For standard equipment retain the default setting RGB.
Videosystem
In this line of the menu, use the OK key to set the video standard appropriate to your TV
set. You can choose from the following options: PAL I, PAL G, SECAM G and SECAM L.
14
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 14

Subtitel
Your DVB receiver has the facility to display sub-titles. Provided the function Sub-titles has
been enabled, and the preferred language selected in terms of the Audio signal selection is
available, the sub-titles will be superimposed on the picture automatically. If the function has
not been enabled, it can be set manually, Sub-titles are indicated by the symbol in the
information display. Please also refer to Point 6.12 in this instruction manual.
5.4 Adjustments for the External Unit
Once you have made all the individual selections, to make the receiver conform to your pre-
ferences, it may still be necessary to make some adjustments for the receiver to work opti-
mally with your antenna/satellite dish. The default factory setting is pre-programmed for
reception of ASTRA and EUTELSAT broadcasts by means of a universal LNB (see Glossary
at end for technical terms). Once the receiver has been connected to an external reception
unit and switched on, these programmes can be received without any further adjustments.
Should you also wish to receive signals from other satellites, or if you have a different type of
LNB, you can make the following adjustments in your receiver to provide for these program-
mes:
> Press the Menu key to display the Main Menu
>Use the up/down arrow keys to select the entry Settings.
> Confirm by pressing the OK key.
The menu Settings will be displayed.
> Now use the up/down arrow keys to select the entry LNB Settings
>Confirm by pressing the OK key.
The menu Settings LNB will be displayed.
15
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 15

The following selections can be made in this sub-menu:
5.4.1 Switching DiSEqC on or off
DiSEqC (Digital Satellite Equipment Control) is a digital signal that can control the functions
of DiSEqC-compatible components via the antenna connection.
If your external installation features DiSEqC components, you should enable the DiSEqC
control function:
> When this entry is highlighted, use the OK key to switch the DiSEqC function on or
off.
5.4.2 Adjusting the Switching Matrix and LNB Properties
The menu reflects the four switching criteria of the DiSEqC control.
Your receiver is pre-programmed to receive ASTRA broadcasts on switch setting A/A, and
EUTELSAT signals on setting B/A of a Multiswitch. Should the switching matrix of your exter-
nal receiving unit be set up differently, or should you wish to receive satellite signals other
than those mentioned, you can adjust the receiver settings as follows:
> Use the up/down arrow keys to select the DiSEqC switch position (1-4) that you
wish to use for allocation to a satellite (e.g. A/B 3 No Satellite), and highlight the
appropriate entry.
> Press the OK key to confirm.
A list of several satellites will be displayed, from which you can make your selection.
> Use the up/down arrow keys to select the appropriate satellite.
Pressing the up/down arrow keys will move the marker by one line at a time, up or
down, while the left/right arrow keys will take you to the previous or following
pages respectively.
Should the satellite you are looking for not be included in the list, please select one of
the spare settings, which are marked User 1 to User 15.
>Confirm by pressing the OK key.
The highlighted entry will now be inserted in the Menu >Settings>LNB at the pre-
viously selected position
In this way, you can continue to customise the Menu>Settings>LNB until all the informa-
tion in this menu correspond to those of your receiving unit. For those switiching criteria you
do not require you should select the setting No Satellite.
5.4.3 Additional Settings
Now that the switching matrix of your DVB receiver has been adjusted to conform to your
external reception equipment, you should also check on the other settings for your receiving
equipment, and adjust the settings where necessary.
> Use the left/right arrow keys to mark the entry Check LNB.
>Using the up/down arrow keys to move around the field Check LNB, select the
satellite position (1-4) that you wish to adjust resp. check on; mark the entry Pro-
ceed in blue.
16
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 16

>Confirm by pressing OK.
The menu >LNB>Check will now be displayed, together with the DiSEqC setting
selected (e.g. A/A 1).
The following settings can be made:
LOF low band
LOF (local oscillator frequency) is the frequency used by the LNB to convert the frequency
received into the so-called 1st Intermediate Frequency, which can then be utilised by the
receiver. So-called universal LNBs utilise 2 LOFs in order to cover the whole frequency
range of 10.7 to 11.8 GHz (low band) and 11.7 to 12.75 GHz (high band). Using the numeric
key pad of your remote control, enter here the LOF frequency corresponding to the low band
of your LNB.
LOF high band
As above - using the numeric key pad of your remote control, enter here the LOF frequency
corresponding to the high band of your LNB.
Transition LOF low/high
Use the numeric key pad of your remote control to enter the frequency at which your LNB
switches from low band to high band.
Transponder Test
The following points of this menu should only be entered if you want to test a satellite signal
by means of a self-generated satellite (User 1 to 15).
Transponder frequency
Use the numeric key pad to enter a frequency at which digital programmes are broad-
cast.
Polarisation
Use the OK key to enter the appropriate polarisation plane (horizontal or vertical) on which
the selected programme is broadcast.
Symbol rate
The symbol rate is an indication of the volume of data being transmitted per second. A typi-
cal rate might be 27000, indicating that 27000 symbols per second are being transmitted.
Use the numeric key pad to enter the appropriate symbol rate.
FEC Rate
The FEC function adjusts error correction to the requirements of the selected transponder.
Use the OK key to enter the appropriate FEC. This can be 1/2, 2/3, 3/4, 5/6, 6/7 or 7/8.
If the FEC rate is not known, use the Auto setting.
Signal
This line will indicate the signal strength, provided the details of the transponder have been
entered correctly.
Red bar: poor reception, digital reception not possible
17
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 17

Yellow bar: good reception
Green bar: excellent reception
6 Operation
6.1 Switching on and off
>Use the key On/standby on the receiver or on the remote control to switch the
receiver on.
> Pressing the same key on the receiver or on the remote control again will switch the
receiver off again.
> The receiver is now in standby mode, the display on the receiver will now show the
time.
If the time is not shown, this must still be acquired by the receiver. In Germany, it is
sufficient to switch the receiver on, and to select Channel 1 (ARD) of the public servi-
ce broadcast system for the time to be acquired automatically.
6.2 Programme Selection
6.2.1 Using the Programme up/down keys
> Use the Channel up/down keys either on the receiver front panel or on the remote
control to move up or down the list one channel at a time.
6.2.2 Using the Numeric Key Pad
> Use the numeric key pad to enter the desired programme/channel number directly:
For example:
1Programme/channel 1
1, followed by 4Programme/channel 14
2,followed by 3, followed by 4Programme/channel 234
When entering programme numbers consisting of more than one digit, you have about 3
seconds after pressing one digit to enter the next digit, in order to complete the entry in such
a way that the receiver recognises all digits as part of one selection.
If you are entering a programme number with only one or two digits, you can speed up the
selection process by pressing OK after entering the last digit.
6.2.3 Using the Programme List
> Press the key OK
A list of programmes will now be displayed.
IIf the receiver is in TV mode, only TV programmes will be shown, and in Radio mode only
radio programmes will be displayed. The programme currently selected is highlighted in red.
> You can now proceed to mark the desired programme in blue by using the up/down
arrow keys.
18
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 18

>Press the OK key, and the desired programme will be shown.
> Use the up/down arrow keys to move up or down the programme list one line at a
time.
> Use the left/right arrow keys to move forward or back one page at a time.
6.2.4 Selecting blocked programmes
If a programme is selected that is subject to parental lock, the words PIN Number will
appear on the screen
> Use the numeric key pad to enter your PIN number.
The desired programme can now be viewed.
In order to make this function easy to use, the PIN number needs to be entered only once
during an operational phase. The parental lock feature is only activated again next time the
receiver is switched on.
6.2.5 Information (Info) Box
Every time the programme is changed, an info box will be displayed temporarily, showing the
programme number and name. In addition, any programme features will be shown, e.g. TxT
for video text, 16/9 for a 16/9 widescreen broadcast, A/B for various audio channels (e.g.
movies with several language soundtracks, or various radio programmes), the Dolby sym-
bol for Dolby Digital broadcasts, or the symbol for sub-titles.
6.3 Reception of scrambled (encrypted) Programmes
Your receiver is equipped with a built-in VIACCESS decoding module. This enables you to
receive scrambled programmes in conjunction with an appropriate smart card. In order to
receive such programmes, you must insert a VIACCESS smart card into the integrated card
reader, with the gold-coloured chip at the bottom, and facing in the direction in which it is
being inserted, and push in carefully until resistance is felt.
6.4 Adjusting sound volume
You can adjust the volume of your receiver. This facilitates use of the receiver, as it means
you have all important functions in one remote control, and will have to revert to the remote
control of your TV set only very rarely. Whenever the receiver is switched on, the volume set-
ting used last will be set again.
> Use the keys Volume + to increase the sound volume, and Volume - to reduce the
volume.
> Press the key Sound on/Off to mute the sound. Repeated pressing of this key will
restore the sound.
6.5 Selecting a different language
If a programme is broadcast in several languages, you can select a language as follows:
> Press the Language Selection key
The list of languages available will now be displayed on screen.
> Use the up/down arrow keys to select the desired language.
Confirm by pressing the OK key.
Disable the menu display by pressing the Language Selection key again.
You can now listen to the programme in the selected language. If the programme is chan-
ged, the receiver automatically reverts to the default language setting (see 5.3 Language
Selection). Your receiver also provides the facility to receive mono broadcasts. For mono
transmissions, you can use the MONO1/MONO2 key to switch between the MONO1 and
MONO2 sound channels.
19
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 19

6.6 TV/Radio selection
Your receiver has been pre-programmed with a selection of radio as well as TV programmes.
When selecting a radio programme, the TV image is switched off, and only the radio pro-
gramme name is displayed.
> Use the TV/Radio key to select radio mode.
The receiver will automatically go to the last radio programme selected.
> Press the TV/Radio key again, and the last TV programme selected will be display-
ed again.
6.7 Return to previous programme selected
>Press the Back key on the remote control to view the last programme previously sel-
ected.
> Press the same key again to return to the programme viewed before the change.
6.8 Displaying Time and Programme Information
This function allows you to view information about the programme currently selected.
> Press the blue key in order to display information on the current programme.
The bottom of the screen will now display the current time, the current channel as well as the
name of the current programme, including the starting and end times of the programme, if
these details are broadcast by the channel concerned.
6.9 Additional Programme Information
In as far as such information is provided by the broadcasters, you can obtain additional pro-
gramme information by pressing the Programme Info key.
> Pressing the yellow key will open a further viewing window on your screen.
Information relating to the current programme will be displayed.
> Now press the OK key to obtain information about the following programme
> Pressing the yellow key again will cause the on-screen information to disappear.
6.10 Transponder Information
>Press the green key Transponder Info to display data relative to the transponder
selected.
> Press the same key again to return to the normal video display.
6.11 Video text
Where broadcast, video text will be sent through to your TV set. Use the remote control of
your TV set to utilise the video text function. Should your TV set experience problems, e.g.
video content and text are superimposed, you should set your receiver to FBAS mode
(Point 5.3)
6.12 Sub-titles
The symbol displayed in the on-screen information window will indicate when sub-titles
are being broadcast.. If you have enabled the Sub-title function as per Point 5.3, these will
be displayed automatically if they are being broadcast in the language selected (Point 5.3).
If you have not enabled the Sub-title function, or if sub-titles are only being provided in
other languages, you can also enable their display manually as follows:
> Press the red function key.
A list of the sub-title languages currently being broadcast will be displayed.
> Use the up/down arrow keys to select the language required.
20
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 20