Technoline WT-181 User manual

Istruction manual WT-181
Main UnitAppearance
Part A-LCD
A1: Radio signal received icon. A4: Day of Week
A2: Radio controlled Time. A5: Alarm icon
A3: Month / Date. A6: Temperature
Part B-Button
B1: MODE BUTTON B2: “▲” BUTTON
B3: “▼”BUTTON B4:“C/F”BUTTON
B5: SNOOZE/LIGHT BUTTON
B6: “ALARM,SNOOZE ON/OFF” Slide key
Part C-Structure
C1: Battery Compartment
Set Up:
zRemove battery compartment door at the back of the unit.

zInsert one AA battery.
zPress "RESET" hole inside the battery door the unit with a pin.
Radio Controlled Time:
zThe clock automatically starts scanning the DCF frequency signal after new
batteries inserted ( “ “ flashes on the LCD)
zThe clock automatically scans the time signal at 3:00a.m. everyday
to maintain accurate timing. For failed reception in 4 minutes, scanning stops
(“ “ on LCD disappear) and repeats again at 4:00a.m., 5:00a.m., and
6:00a.m.
zThe clock manually scans the time signal by hold ▲”(B2) & “▼”(B3) buttons. For
failed reception in 4 minutes, scanning stops (“ “ on LCD disappear) and
repeats again in the next hour. e.g. scanning at 8:20a.m. fail, it will scan again at
9:00a.m.
zHold ▲”(B2) & “▼”(B3) button for 3 seconds to stop scanning.
* flashes indicate now is receiving DCF signal
Turns on indicate signal received successfully
“DST” shown on the LCD if it is in Daylight Saving Time Mode
Manual Time Setting:
zPress “MODE” (B1) button to select time display.
zHold “MODE” (B1) button for 3 seconds and time flashes.
zPress “▲”(B2) & “▼”(B3) to adjust Time, Year, Month and Date.
zThe setting sequence is shown as follow: Hour, Minutes, Second, Year, Month, Day,
Language of Weekday,Time Zone.
zPress “MODE” (B1) button to confirm each setting.
zThere are 7 languages, English, German, French, Spanish, Italian, Dutch and
Denmark, for day-of-week. The languages and their selected abbreviations for each
day of the week are shown in the following table.

Language
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
English, EN SUN MON TUE WED THU FRI SAT
German, GE SON MON DIE MIT DON FRE SAM
French, FR DIM LUN MAR MER JEU VEN SAM
Spanish, ES DOM LUN MAR MIE JUE VIE SAB
Italian, IT DOM LUN MAR MER GIO VEN SAB
Dutch, NE ZON MAA DIN WOE DON VRI ZAT
Denmark, DA SON MAN TIR ONS TOR FRE LOR
zThe Time zone is used for the countries where can receive the DCF time signal but
the time zone is different from the German time.
zWhen the country time is faster than the German time for 1 hr, the zone should be
set to +1. Then the clock will automatically set 1 hour faster from the signal time
received.
zThe Time Setting Mode will automatically exit in 10 seconds without any
adjustment.
Daily Alarm Setting :
zPress “MODE”(B1) to select Alarm Time Display
zHold “MODE”(B1) for 3 seconds and Alarm Time flashes.
zPressing “▲”(B2) & “▼”(B3) buttons to adjust the alarm time.
zPress “MODE”(B1) to confirm each setting.
SnoozeAlarm Function :
zSlide the “ALARM,ANOOZE NO/OFF” (B6) switch to ON to switch on the alarm.
" " appears on the display
zSlide the “ALARM,ANOOZE NO/OFF” (B6) switch to SNOOZE to switch the
snooze alarm. "Zz" appears on the display.
zPress SNOOZE/LIGHT (B5) when alarm alerts. The alarm snoozes for 4 minutes,
then it alerts again. “Zz” flashes on the LCD during the snooze time.
zSimply press other buttons or slide “ALARM,ANOOZE NO/OFF” (B6) switch to
OFF to stop snooze alarm.

Back Light:
zPress SNOOZE/LIGHT (B5), back light states for 3 seconds
zBack light states for 3 seconds when alarm alerts
Notes:
zAll function keys do not work when the radio signal is being scanned
zIf the unit does not work properly, please take off the batteris. Wait a few second
for the all display turn off. Insert batteris again. The unit will reset.
zAvoid placing the clock near interference sources/metal frames such as computer
monitor or TV sets
zPlacing the clock closer to a window/towards the general direction of the
Transmitter. The signal is weaker in basement
zNever use the clock in bathroom or any other area with high humidity
zThe operating temperature of the clock is 0˚C – 50˚C
zThe clock loses its time information when the battery is removed