
Attention
1. To maximize battery life, it’s recommended to use the mouse on a white or light
color surface. As the mouse might not work smoothly on some special surfaces,
such as smooth, dark or black, reflecting and 3D mouse pads surfaces.
2. If not used, the mouse will drop into auto-sleeping mode within 3 minutes.
Press any key or scroll wheel to activate the mouse.
3. Do not use the mouse on a glass or mirrored surface, as these
surfaces will cause the mouse to fail temporarily.
4. Avoid using the mouse on a metal surface. Metals, such as iron, aluminium or
copper, shield the radio frequency transmission and may slow down the mouse
presenter’s response time or cause the mouse to fail temporarily.
5. If your PC has a metal case that contains aluminum or magnesium, use the
mouse by the side of the PC. The display panel may interfere with the radio
frequency if you use the mouse directly in front of the PC.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW
THESE INSTRUCTIONS.
1.SAVE THESE INSTRUCTIONS - This sheet contains important safety
and operating instructions.
2.Before using the product, read all instructions and caution markings on
the product, accessories and device using our product.
3.This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4.Children should be supervised to ensure that they do not play with
the appliance.
5.Keep the product away from fire or explosion may occur.
6.For indoor use only. Do not expose to rain, water, excess moisture or
snow. 7.For proper insertion, please observe polarity indicators ( +/-)
8.Remove the batteries if the mouse is not going to be used for a long
period of time.
9.Do not place product in or near inflammable, explosive or hazardous
object. 10.Do not place in or near water, rain, excess moisture or extreme
heat. 11.Do not operate product with damaged cord or plug.
12.Do not operate product if it has been damaged in any way.
13.Do not disassemble the product. Disassembly may result in a risk of
safety hazards.
14.Do not throw or shake the product
15.To reduce the risk of electric shock, unplug the product from the
power supply when not in use or switch off the power supply
04