Teka IRS 943 Specification sheet

INSTALLATIONINSTRUCTIONS AND
USE AND MAINTENANCE RECOMMENDATIONS
INDUCTION AND VITROCERAMICHOBS
EINBAU-ANLEITUNG
UND EMPFEHLUNGEN FÜR GEBRAUCH UNDINSTANDHALTUNG
INDUKTIONSKOCHFELD
INSTRUCTIONSPOUR L'INSTALLATION
ETRECOMMANDATIONS D'UTILISATION ETMAINTENANCE
PLANS DE TRAVAILDECUISSON PAR
INDUCTION ET VITROCÉRAMIQUES
IRX 633-IRS 633-IRX643 -IRS643
ITS643 /GKST60 i4 TREND SLIDER
IQS 643-IRS843 -IRS933 HS -IQS633
IRX933 HS-IRS943

2
Contents/Inhalt /Table des matières
Introduction
User Guide
Installation
Positioning the hobs
Fixing the hob
Connecting the electricity
Technical information
Dimensions and characteristics
Use and Maintenance
Touch Control Panel
User Instructions
Page 4
11
13
13
14
14
16
16
17
17
GB
Suggestions and recommendations
Cleaning and care
Environmental considerations
If something doesn't work
Allgemeines
Bedienungsanleitung
Einbau
Einbauort
Verankerung
Netzanschluss
Technische Angaben
Abmessungen und Eigenschaften
Bedienung und Pflege
Sensorbedienung
4
28
DE
Hinweise und Empfehlungen
Reinigung und Pflege
Umweltangelegenheiten
Störungsbehebung
23
23
25
26
40
41
43
44
19
19
19
19
20
20
21
22
22
22
23
30
30
31
32
33
33
34
34
36
36
37
37
37
37
37
38
39
40
40
40
Pan detector
Blocking cooktop sensors
Stop Function
Heat Sustainment Function
Power Function
Boil Control Function
Safety shut off
Timer function
Total Zone Function
Overheating safety
Power surges in the network
Topferkennung
Sperrung der Kochfeldsensoren
Stop-Funktion
Aktivierung der Funktion
Warmhalte-Funktion
Power-Funktion
Kochkontrolle-Funktion
Sicherheitsabschaltung
Zeitschaltuhr
Funktion Kombi-Zone
Sicherheit bei Überhitzung
Überspannungen im Netz

3
Présentation
Guide d'utilisation
Installation
Emplacement des plans de travail
de cuisson
Ancrage du plan de travail de cuisson
Connexion électrique
Information technique
Dimensions etcaractéristiques
Utilisation et Maintenance
Instructions d'utilisation de la
commande tactile
FR
Suggestions et recommandations
Nettoyage et conservation
Considérations environnementales
Si quelque chose ne fonctionne pas
4
46
48
48
49
50
51
51
58
59
60
62
52
52
54
54
55
55
55
55
56
57
58
58
58
Détection de récipients
Verrouillage des touches de la
table de cuisson
Fonction Stop
Fonction Mantien de la chaleur
Fonction Power
Fonction Contrôle d'ébullition
Déconnexion de sécurité
Fonction minuterie
Fonction Zone totale
Sécurité face aux surchauffes
Surtensions sur la ligne

4
Introduction /Allgemeines /Présentation
Notes about the cookware tobeused with
yourinduction hob.
The size of the base of the cookware to be used
should be large enough to completely cover the
cooking zone drawn on the glass.
Depending on the type of cookware (material
and size), the induction zones may work with
smaller cookware.
Please remember that in order to work, the
induction elementsneed to be used with cook-
ware that has aferromagneticbase (material
attracted by amagnet).
Always use cookware witha flat, smo-
othbase onthe inductionelements. Using
cookware with adeformed,concave or cur-
ved base can lead to overheatingthat can
damage the glass or thecookware.
Please take into account that the
cookware that youuse can greatly affect the
how well theinduction element works. You
may findcookware onthe market that,
althoughmarkedas beingsuitable forinduc-
tion hobs, does not work very well oris not
easily recognised bytheinductionelement
due to thelittle amount or poorquality of the
ferromagnetic material that the cookware
has in itsbase.
Hinweise zum Kochgeschirr
Der Boden des verwendeten Kochgeschirrs
sollte die gesamte Fläche der auf der Glaskera-
mik gekennzeichneten Kochzone bedecken.
Dennoch kann ebenso Kochgeschirr kleineren
Durchmessers verwendet werden, sofern Mate-
rial und Größe des Geschirrs eine Magnetisie-
rung erlauben.
DieInduktionszonen sind ausschließlich für
Kochgeschirr mitferromagnetischem Boden
geeignet (magnetisierbares Material).
Der Boden des Kochgeschirrs sollte
glatt undvollkommen eben sein. Andernfalls
können GeschirrundGlaskeramik durch
Überhitzung beschädigt werden.
Die Leistung der Induktionskochzo-
nenhängt wesentlich von der Artdes ver-
wendeten Kochgeschirrs ab. Kochgeschirr
für Induktionskochzonen wird vomHerste-
ller entsprechend gekennzeichnet, jedoch
ist dies keine Garantie dafür,dass das Ges-
chirr vom Kochfeld erkannt wirdoderdass
die Leistung der Kochzonen effektiv ausge-
nutzt werden kann. Ausschlaggebend sind
hier in jedem Fall Qualität und Menge des im
Boden des Geschirrs verarbeitetenferro-
magnetischen Materials.
Notes sur les récipientsàutiliser sur votre
plan de travail àinduction.
Le récipient àemployer doitavoir un fond dont
la dimension de fond couvre complètement la
zone de cuisson qui figure sur la vitre.
Selon letype de récipient (matériel et dimen-
sion), les zones à induction peuvent fonctionner
avec des récipients plus petits.
Il convient de tenir compte que les plaques à
induction nécessitent pour fonctionner des réci-
pientsàfond ferromagnétique (matériau attiré
par un aimant).
Surles plaques àinduction, utilisez
toujours des récipientsàfondplat et lisse.
L'emploi de récipientsàfonddéformé, con-
cave ou ondulé provoque des surchauffes
qui peuvent endommager la vitre oule pro-
pre récipient.
Il convient de tenir compte que le réci-
pient quevous utilisez peut avoir une gran-
deinfluence sur le rendement de toute pla-
que àinduction. Il existe sur le marché des
récipientsqui, malgré le fait d'être signalé
comme aptes pourl'induction, ont unrende-
ment très faible oudes problèmes pour être
reconnus par la plaque àinduction, enrai-
sonde la légère quantité ou qualité du maté-
riel ferromagnétique qu'ale fond duréci-
pient.
GB
DE
FR

5
Model IRS 633
12,300 /3,200* watt induction element
21,700 /2,500 and 2,500 /3,700* watt
induction element
31,400 /1,800* watt induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IRS 633
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1.700 /2.500 und
2500 /3700*W
3Induktionskochzone mit 1400 /1800* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-MaximaleInduktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IRS 633
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1700 /2500 et
2500 /3700* W.
3Plaque àinduction de 1400 /1800* W
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
12
3
12
3
Model IRX 633
12,300 /3,200* watt induction element
21,700 /2,500 and 2,500 /3,700* watt
induction element
31,400 /1,800* watt induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supplyvoltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IRX 633
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1.700 /2.500 und
2500 /3700*W
3Induktionskochzone mit 1400 /1800* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IRX 633
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1700 /2500 et
2500 /3700* W.
3Plaque àinduction de 1400 /1800* W
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
-Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR

6
12
34
12
34
Model IRS 643
12,300 /3,200* watt induction element
21,850 /2,500* watt induction element
31,400 /1,800* watt induction element
41,850 /2,500* watt induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IRS 643
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1850 /2500* W
3Induktionskochzone mit 1400 /1800* W
4Induktionskochzone mit 1850 /2500* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-MaximaleInduktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IRS 643
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1850 /2500* W
3Plaque àinduction de 1400 /1800* W
4Plaque àinduction de 1850 /2500* W
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
Model IRX 643
12,300 /3,200* watt induction element
21,850 /2,500* watt induction element
31,400 /1,800* watt induction element
41,850 /2,500* watt induction element
*Induction power with the Power function
activated.
-Residualheat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IRX 643
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1850 /2500* W
3Induktionskochzone mit 1400 /1800* W
4Induktionskochzone mit 1850 /2500* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IRX 643
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1850 /2500* W
3Plaque àinduction de 1400 /1800* W
4Plaque àinduction de 1850 /2500* W
*Puissance àinduction avec lafonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR

7
12
34
Model ITS 643 /GKST60 i4 TREND SLIDER
12,300 /3,200* watt induction element
21,850 /2,500* watt induction element
31,400 /1,800* watt induction element
41,850 /2,500* watt induction element
*Induction power with the Power function acti-
vated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 230 volts.
-Frequency: 50/60 hertz.
Model ITS 643 /GKST60 i4 TREND SLIDER
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1850 /2500* W
3Induktionskochzone mit 1400 /1800* W
4Induktionskochzone mit 1850 /2500* W
*Induktionsleistung bei aktivierter Power-Funk-
tion
-Restwärmeanzeige (H)
-MaximaleInduktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Model ITS 643 /GKST60 i4 TREND SLIDER
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1850 /2500* W
3Plaque àinduction de 1400 /1800* W
4Plaque àinduction de 1850 /2500* W
*Puissance àinduction avec la fonction Power
activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
Model IQS643
12,300 /3,200* watt induction element
21,850 /2,500* watt induction element
31,400 /1,800* watt induction element
41,850 /2,500* watt induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supplyvoltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IQS 643
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1850 /2500* W
3Induktionskochzone mit 1400 /1800* W
4Induktionskochzone mit 1850 /2500* W
*Induktionsleistung beiaktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IQS643
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1850 /2500* W
3Plaque àinduction de 1400 /1800* W
4Plaque àinduction de 1850 /2500* W
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
12
34

8
123123
4
Model IRS 843
12,300 /3,700* watt induction element
21,400 /1,800* watt induction element
31,850 /2,500* watt induction element
41,850 /2,500* watt induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supplyvoltage: 230 volts.
-Frequency: 50/60 hertz.
Model IRS 843
1Induktionskochzone mit 2300 /3700* W
2Induktionskochzone mit 1400 /1800* W
3Induktionskochzone mit 1850 /2500* W
4Induktionskochzone mit 1850 /2500* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Model IRS 843
1Plaque àinduction de 2300 /3700* W
2Plaque àinduction de 1400 /1800* W
3Plaque àinduction de 1850 /2500* W
4Plaque àinduction de 1850 /2500* W
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
-Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
Model IRX 933 HS
12,300 /3,200* watt induction element
21,400 /1,800* watt induction element
3 1,700 /2,500 and 2,500 /3,700* watt
induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supplyvoltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IRX 933 HS
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1400 /1800* W
3 Induktionskochzone mit 1.700 /2.500 und
2500 /3700*W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IRX 933 HS
1Plaque àinduction de 2300 /3200* W
2 Plaque àinduction de 1400 /1800* W
3 Plaque àinduction de 1700 /2500 et
2500 /3700* W.
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
-Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR

9
123
12
3
Model IQS 633
12,300 /3,200* watt induction element
21,700 /2,500 and 2,500 /3,700* watt
induction element
31,400 /1,800* watt induction element
*Induction power with the Power function
activated.
-Residualheat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IQS 633
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1.700 /2.500 und
2500 /3700*W
3Induktionskochzone mit 1400 /1800* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IQS 633
1Plaque àinduction de 2300 /3200* W
2Plaque àinduction de 1700 /2500 et
2500 /3700* W.
3Plaque àinduction de 1400 /1800* W
*Puissance àinduction avec lafonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
Model IRS 933 HS
12,300 /3,200* watt induction element
21,400 /1,800* watt induction element
3 1,700 /2,500 and 2,500 /3,700* watt
induction element
*Induction power with the Power function
activated.
-Residual heat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 230 volts.
-Frequency: 50/60 hertz.
Modell IRS 933 HS
1Induktionskochzone mit 2300 /3200* W
2Induktionskochzone mit 1400 /1800* W
3 Induktionskochzone mit 1.700 /2.500 und
2500 /3700*W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 230 V
-Frequenz: 50/60 Hz
Modèle IRS 933 HS
1Plaque àinduction de 2300 /3200* W
2 Plaque àinduction de 1400 /1800* W
3 Plaque àinduction de 1700 /2500 et
2500 /3700* W.
*Puissance àinduction avec la fonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :230 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR

10
Model IRS 943
12,300 /3,700* watt induction element
21,400 /1,800* watt induction element
31,850 /2,500* watt induction element
41,850 /2,500* watt induction element
*Induction power with the Power function
activated.
-Residualheat indicator.(H)
-Maximum induction power: 7,400 watts.
-Power supply voltage: 220-240 volts.
-Frequency: 50/60 hertz.
Model IRS 943
1Induktionskochzone mit 2300 /3700* W
2Induktionskochzone mit 1400 /1800* W
3Induktionskochzone mit 1850 /2500* W
4Induktionskochzone mit 1850 /2500* W
*Induktionsleistung bei aktivierter Power-
Funktion
-Restwärmeanzeige (H)
-Maximale Induktionsleistung: 7400 W
-Betriebsspannung: 220-240 V
-Frequenz: 50/60 Hz
Model IRS 943
1Plaque àinduction de 2300 /3700* W
2Plaque àinduction de 1400 /1800* W
3Plaque àinduction de 1850 /2500* W
4Plaque àinduction de 1850 /2500* W
*Puissance àinduction avec lafonction
Power activée.
-Indicateur de chaleur résiduelle. (H)
-Puissance maximum àinduction :7400
Watts.
- Tension d'alimentation :220-240 Volts.
-Fréquence :50/60 Hertz.
GB
DE
FR
123
4

11
GB
Guide to Using the Instructions Booklet
Dear Customer,
We are delighted that you have put your
trust in us.
We are confident that the new hob that you
have purchased will fullysatisfy your
needs.
Thismodern, functional andpractical
model has been manufactured using top-
qualitymaterialsthathaveundergone
strict qualitycontrols throughout the manu-
facturing process.
Before installing and using it, please read
this Manual carefully and follow the ins-
tructions closely; this will guarantee better
resultswhen using the appliance.
Keep this Instruction Manual in asafe
place so thatyou can refer to it easily and
thus abide by the Guarantee conditions.
In order to benefit from this Guarantee, itis
essential thatyou submit the purchase
receipt together with the Guarantee certifi-
cate.
You should keep the Guarantee
Certificate or,where relevant, the tech-
nical datasheet, together with the Ins-
truction Manual for the duration of the
useful life ofthe appliance. Ithas
important technical information about
the appliance.
Safety Instructions
Before first use, you should carefully read
the installation and connection instruc-
tions.
These hob models may be installed in the
same kitchenfurnitureunitsasTEKA
brand ovens.
For yoursafety,installation should be
carried out by an authorised technician
and should comply with existing installa-
tion standards. Likewise, any internal work
on the hob should only be done by TEKA's
technical staff,including the change of the
flexible supply cable of the appliance.
Safety warnings:
Iftheceramicglassbreaks or
cracks, immediatelyunplug the stove-
top to avoid electricshocks.
Thisappliance is not designed to
work with an external timer (not built
into the appliance) or aseparate remo-
te control system.
Do not steam clean this device.
The device and itsaccessible
partsmay heat up during operation.
Avoid touching the heating elements.
Children younger than 8years old must
stay away from the stovetop unless
they are permanentlysupervised.
This device may solely be used by
children 8years old or older,people
with impairedphysical,sensoryor
mental abilities, or those who lack
experience and knowledge, ONLY when
supervised or ifthey have been given
adequate instruction on the use of the
device and understand the dangers its
use involves. User cleaning and main-
tenance may not be done by unsupervi-
sed children.
Children must not play with the
device.
Precaution.It isdangerous tocook
withfatoroil withoutbeing present,as

12
thesemay catch fire.Nevertrytoextin-
guish a fire withwater!inthiseventdis-
connect the deviceand cover the flames
withalid,aplateor ablanket.
Do not store any object on the
cooking areas of the stovetop. Prevent
apossible fire hazard.
Do notplace metalobjects,such as
knives,forks, spoonsor lidsonthe surfa-
ceofthe hob,asthey mayget very hot.
The induction generator complies
with all current European standards.
Nonetheless, we recommend thatpeo-
plewith heart devices, with such as
artificialpacemakers,consult with their
doctor or,if in doubt, refrain from using
the induction zones.
It is advisable not touse the
induction hob during the pyrolitic clea-
ning function in the case of the pyrolitic
ovens, due to the high temperature rea-
ched by this appliance.
When finished,turn off the coo-
king zone by using the touch controls.
Otherwise anundesiredoperation
could occur if apan isaccidentallypla-
ced on the cooking zone during the
nextthree minutes. Avoid possible
accidents!
The size of the base of the cook-
ware to beusedshouldbelarge
enough to completely cover the coo-
king zone drawn on the glass. Depen-
ding on the type of cookware (material
and size), the inductionzones may
work with smaller cookware.
Please remember that in order to
work, the induction elementsneed to
be used with cookware that has aferro-
magnetic base (material attracted by a
magnet).
Always use cookware with aflat,
smooth base on the induction ele-
ments.Using cookware with adefor-
med, concave or curved base can lead
to overheating that can damage the
glass or the cookware.
Please take into account that the
cookwarethat youusecangreatly
affect the how well the induction ele-
ment works. You may find cookware on
the market that, although marked as
being suitable for induction hobs, does
not work very well or is not easily
recognised by the induction element
due to the little amount or poor quality
of the ferromagnetic materialthat the
cookware has in itsbase.
GB

13
GB
INSTALLATION ANDSETUPSHOULD
BE CARRIED OUT BYAN AUTHORISED
TECHNICIANACCORDING TO
CURRENT INSTALLATION STANDARDS.
Positioning the hobs
Toinstall these models, an opening with
the dimensions shownin figure 1should
be cut into the unit's worktop.
The system for fixing the hob is intended
for use with kitchen unitswith athickness
of 20, 30 and 40 mm.
The minimum distance between the surfa-
ce of the hob and the lower part of the kit-
chen unitor the hood located above the
hob should be 650 mm. If the hood's insta-
llation instructions recommend thatthe
gap is greater than this, you should follow
this advice.
The unitwhere the hob and oven will be
located should be suitably fixed.
INSTALLATION WITH ACUTLERY
DRAWER OR LOW CUPBOARD
If you wish to install asilverware drawer
under the countertop, you should install a
cover or spacer,located at least 60 mm
from the back of the countertop,to avoid
blocking the countertop fans with objects
placed in the drawer.In this way,potential
risks can be avoided due to inflammable
objectsthat may be stored in the drawer.
INSTALLATION WITH A THERMOVENTI-
LATED OVEN UNDER THE HOB
The oven should be installed according to
the corresponding manual.
If the countertop is installed with an oven
underneath, it is recommended that the
same be aTeka brand thermo-ventilated
Installation
fig. 1
W
L
575max.
The dimensions Land Ware in the table "Dimen-
sions and characteristics"in the Technical Infor-
mation section.
Minimumdistan-
ce towalls
Important: minimum
ventilationdistances
DRAWER
THERMOVENTI-
LATED OVEN
Fittingholes

GB
14
oven, to ensure good operation of the
countertop.
Aspace should be leftin front of the furni-
ture for evacuation of hotair.The opening
should be at least 5mm high. Itslength
should be the width of the furniture.
An opening of 20 mm should be made in
the back part ofthe furniture to allow inta-
ke of cold air (see figure 1).
When hobs are handled before
being installed,care should be taken in
case there is any protruding part or
sharp edge which could cause injury.
When installing unitsor applian-
ces above the hob, the hob shouldbe
protected by aboard so that the glass
cannotbedamaged byaccidental
blows or heavy weight.
The glues used in manufacturing
the kitchen unit and on the decorative
laminates and on the laminates that are
part of the worktop surface shouldbe
made to tolerate temperatures of up to
100ºC.
TEKAdoes not assume any res-
ponsibility for anymalfunctionor
damage caused by faulty installation.
PLEASE REMEMBER THATTHE GUA-
RANTEEDOESNOTCOVER THE
GLASS IFITSUFFERSAVIOLENT
BLOW OR IF ITIS USED IMPROPERLY.
Fixing the hob
When the gap has been properly sized,
the gasket should be put on the lower side
of the glass. Silicone should not be
applied between the glass and the unit
worktop because ifit becomes neces-
sary to remove the hob from itsposi-
tion,the glass could break when trying
to detach it.
Toattach the cooking countertop to the fur-
niture, aset of clamps are supplied that
should be fastened in the existing holes in
the lowerpart of the framework. There are
two possible ways to position the clips,as
can be seen in figure 2.
Depending on the thickness of the worktop,
it is possible to use the self-tapping screws
that areprovided as afastening accessory
by putting them into the clip's round hole.
This hole will be threaded as the screw is
inserted intoit.This should be done before
fixing the clip to the worktop.
Connecting the electricity
The electric connection is made using an
omnipolar switch or plug, where accessi-
ble, that is suitable for the intensityto be
tolerated and that has a minimum gap of 3
mm between itscontacts. This will ensure
disconnection in case of emergency or
when cleaning the hob.
The connection should include correct ear-
thing, in compliance with current norms.
If the flexible supply cable fitted to the
appliance ever needs to be changed, it
should be replaced by TEKA's official tech-
Sealing washer
Sealing washer
fig. 2

GB
15
nical service.
The input cable should not be in contact
either with the body of the hob or withthe
body of the oven, ifthe oven is installed in
the same unit.

GB
16
Technical data
Class 3Hob.
TechnicalInformation
*Powerof theinduction elements withthe Power functionactivated.
IRS 643
ITS 643
IQS 643
GKST60i4
TRENDSLIDER
IRS 633
IQS 633
60
600
510
560
490
55
50 /60
7.400
1
1
1
230
50 /60
7.400
230
50 /60
7.400
230
50 /60
7.400
230
IRX 633
60
600
510
560
490
55
1
1
1
IRX 643
60
600
510
560
490
55
60
600
510
560
490
55
22
11
11
IRS 933 HS
IRX 933 HS
IRS 843
60
800
510
750
490
55
60
900
400
860
380
55
50 /60
7.400
230
50 /60
7.400
230
1
2
1 1
1
1
Dimensions and characteristics
IRS 943
60
900
510
860
490
55
50 /60
7.400
220-240
1
2
1

GB
17
Touch control paneluser
instructions
CONTROLPANELELEMENTS(see fig.3
and4)
General on/offsensor.
Cursor slider for controlling power.
PLATE SELECTIONSENSORS and
power indicators. *
Timer indicators.
Direct access to Power Function.
Activation sensor for Block Function.
Activation sensor for Stop Function.
Pilot indicator light Heat sustainment
Function activated *.
Pilot indicator light Boil control Function
activated*.
Pilot indicator light Block Function acti-
vated*.
Pilot indicator light Stop Function acti-
vated*.
Activation sensor for Boil control Func-
tion.
Activation sensor for Heat sustainment
Function.
"Less" sensor for timer.
"More" sensor for timer.
Decimal point.
Total Zone function sensor.
Pilot indicator light Total Zone Function
activated*.
-Light (on): Plate selected (ready to be
used).
-No light (off):Platenot selected (can't be
used).
NOTE: *Visible only when in use.
Operations are carried out by using the
sensors marked on the control panel.
It's not necessary to push hard on the
glass. Simply place your finger on the sen-
sor to activatethe desired function.
Use the cursor slider (2) to adjust power
levels (0- 9,and P)by sliding your finger
over it. Sliding towards the right increases
the value,whereas sliding towards the left
decreases it.
It's also possible to directly selectapower
level by placing your finger directly on a
desired point of the cursor slider.
In order to select aplate on these
models,directly touchthePOWER
INDICATER NUMBER (3).
Use and Maintenance
16
12
13
14
15
1
2
3
4
5
6
8
7
10
11
9
17
fig. 3
18

GB
18
TURNING THE APPLIANCE ON
The first time the cooktop is plugged in (or
after apower outage), the Block function
will appearas activated (pilot light10 on).
In this case, you must deactivate the block
function in order to turn the cooktop on. To
do this, push sensor (6) until pilot (10)
turns off.
1Touch sensor (1) for at leastone
second.
Touch Control is now activated and a 0
appears in all power indicators (3). If a
cooking zone is hot,the corresponding
indicator will show an Hand a 0alternati-
vely.
Once the Control is on, you must activate
aplate within 10 seconds, otherwise the
Touch Control will automatically turn off.
While the touch control is activated, it can
be disconnected at any momentby tou-
ching the general on/off sensor (1)
even if ithas been blocked (see section
"Blocking cooktop sensors"). Sensor
(1) always has priority in disconnecting the
touch control.
ACTIVATINGPLATES
Once the Touch Control is activated with
sensor (1), any plate can be turned on
by following these steps:
1Select the plate by using the correspon-
ding sensor (3). In other words, press
withyour finger the NUMBER INDICA-
TOR. If the glass is hot,the said indica-
tor will go from showing an Hto showing
level 0.The decimal point tothe bottom
right of the number lightsup, indicating
that the plate has been selected.
2Use the cursor slider (2) to choose a
cooking level between 0and 9.
As long as the plate is selected, in other
words, with the decimal point lit up,its
power level can be modified.
TURNING APLATE OFF
Aplate can be turned off by decreasing its
cooking level to 0.In order todo this, the
plate must have been previously selected
(decimal point lit up).
Once a plate has been turned off, an Hwill
appear on the corresponding power indi-
fig. 4

GB
19
cator ifthe glass surface of the cooking
area reaches an elevated temperature.
Burn risk exists. When the temperature
decreases, the indicator turns off(ifthe
cooktop is disconnected), or it will show a
0if itis still on.
TURNING ALL PLATES OFF
All plates can be simultaneously discon-
nected by using the general on/offsensor
(1).All plateindicators will turn off.
Pan detector
Induction cooking zones have abuilt-in
pan detector.This way,the platewill stop
working if there is no pan present or ifthe
pan is not suitable.
The power indicator will show asymbol to
designate "there is no pan" if, while the
zone is on, no pan is detected or the pan
is not suitable.
If apan is taken offthe zone while it is run-
ning, theplate willautomaticallystop
supplying energy and it will showthe
symbol for "there is no pan". When apan
is once again placed on the cooking zone,
energy supply will resume at the same
power level previously selected.
The time for pan detection is 3minutes. If
apan is notplaced within this time period,
or the pan is unsuitable, the cooking zone
shutsoff. The power indicator will go from
showing the symbol "there is no pan" to
showing 0.
When finished, turn off the coo-
king zone by using the touch controls.
Otherwise an undesired operation
could occur if apan is accidentally pla-
ced on the cooking zone during the
next threeminutes.Avoidpossible
accidents!
Blocking cooktop sensors
BLOCK FUNCTION
With the Block Function, you can block the
other sensors, except for the on/off sensor
(1), in order to avoid undesired opera-
tions. This function is useful as achildpro-
of safety.
Toactivate this function, touch sensor
(6) for at least one second. Once you have
done so,the pilot (10) turns on indicating
that the control panel is blocked. Todeac-
tivate the function, simply touch sensor
(6) again.
If the on/offsensor (1) is used to turn
off the appliance while the block function is
activated,it won'tbe possible to turn the
cooktop on again until it unblocks.
Stop Function
This function putsthe cooking process on
pause. The timer will also be paused if it is
activated.
Activating the Stop function
Touch the Stop sensor (7) for one
second. The pilot (11) lightsup and the
power indicators will showthe symbol
to indicate cooking has been paused.
Deactivating the Stop function
Touch Stop sensor (7) again. The pilot
(11) turns offand cooking resumes under
the same power and timer settings that
were established before the pause.
Heat Sustainment Function
This function makes itpossible to keep
warm food that is in the pan placed on the

GB
20
cooking area.
This function is independently available for
each one of the plates.
Toactivate it, select the plate. The decimal
pointwill light up. Then push sensor
(13). The symbol "A" will appear in the
indicator and the corresponding pilot (8)
will turn on.
To disconnectthis function,all you have to
do is modify the power of the plate or
directly turn it off.
Power Function
This function supplies "extra" power to the
plate, above the nominal value. Said
power depends on the size of the plate,
(see values specified with *in the presen-
tation section), with the possibilityof rea-
ching the maximum value permitted by the
generator.
1Selectthe desired plate with the corres-
ponding sensor (3). The decimal point
will lightup.
2On the cursor Slider,push directly on
position (5). The power level indica-
tor will show the symbol P,and the plate
will start tosupply extra power.
The Power function has amaximum dura-
tion as specified in table 1. After this time,
the power level will automatically adjust to
9.
Boil Control Function
This innovative function is of an enormous
help if you want tocook pasta,rice, eggs,
or boil any kind offood. This function
allowsyou to perform this cooking method
"almost" automatically.
This function is available only in the plates
where this symbol appears
Pot requirements
For properly using boil control, the pot
must have the following characteristics:
-Bottom size as close as possible to the
diameter of the plate.
- NO COVER.
-Filled more than halfway of itscapacity
with room temperature water (never
use lukewarm or hot water).
Notfulfilling these requirementswill result
in inadequate control of boiling.
WARNING: do not use this func-
tion for cooking methods other than
boiling water.Never use oil. It can over-
heat and create flames.
Activating the function:
Select the proper plate.The decimal point
lightsup.
Push sensor (12).An Awill appear on
the plate indicator and the pilot (9) will turn
on. In the timer for this plate, amoving
segmentwill appear which indicates that
the system has started to monitor cooking.
When the system detectsthat it is about to
boil, an initial beep will go off. Take this
time to prepare the food you want to boil or
cook.
After 30 seconds,asecond beep will go
off. If you haven't done it already,now is
time to put the food into the pot.
After the second beep, the system will acti-
vate the timer as achronometerso that
you can control how long the food has
been boiling.