Televes 593301 User manual

Digital processing handheld DVB Meter / Analyzer
EN
Refs. 593301, 593302
593303, 593304
593360
Instruction Manual
www.televes.com

ENGLISH
EN
Index
Safety requirements ..................................................................................... 4
Symbols anda safety labels ........................................................................... 4
Overview ...................................................................................................... 5
Key Features ............................................................................................... 5
General specications ................................................................................. 6
Technical specications .............................................................................. 7
Description of equipment components ....................................................... 8
Connectors and controls .......................................................................... 8
Keyboard .................................................................................................. 8
Power Supply .............................................................................................. 9
Product Operation ....................................................................................... 11
Channel info .............................................................................................. 11
Spectrum ................................................................................................... 11
MPEG ........................................................................................................ 12
System scan ............................................................................................. 13
Satellite test .............................................................................................. 14
Learning plan ............................................................................................ 14
Constellation ............................................................................................ 15
Echoes ...................................................................................................... 16
Setup ......................................................................................................... 17
Driver installation ......................................................................................... 17
Web application ............................................................................................ 18
Measurements ............................................................................................ 18
Plans ......................................................................................................... 19
SCR ........................................................................................................... 19
Update ....................................................................................................... 19
Firmware update ......................................................................................... 20
Maintenance ................................................................................................ 21
Technical support ......................................................................................... 21
Warranty ...................................................................................................... 22

H30FLEX handheld DVB meter / Analyzer
4
Safety requirements
Product inspection
- Inspect the equipment for shipping damage.
Should any damage be discovered, immediately
le a claim with the carrier.
Read and Follow All Instructions
- All the safety and operating instructions should
be read prior to and followed while operating
this product.
Do not open the meter. Risk of electric shock
Do not obstruct the ventilation slots
Cleaning
- Follow the cleaning instructions contained in
the Maintenance section of this manual.
Attachments
- Do not use attachments that are not approved
by the product manufacturer.
Water and Moisture
- This product is weather resistant but is not
submersible.
- Do not place objects lled with liquids on or
near the meter, such as glasses.
Power Sources
- This product should be operated only from the
type of power source specied.
Grounding or Polarization
- Do not bypass or defeat electrical plug
polarization or grounding. Doing so will violate
the warranty and may pose a risk of re or
electrocution.
Wire Protection
- Ensure all connected wiring is routed correctly
to avoid damage including pinching, excessive
bends, or compression.
Electrical Supply, Grounding, and Surge
Protection
- Ensure that all local or national electrical codes
are followed.
Power Lines
- Always use caution and avoid operating this
or any connected equipment near uninsulated
power lines or any other hazards.
Servicing
- There are no user serviceable parts except the
battery. Do not attempt to service this product or
remove covers other than the battery cover. Refer
all servicing to qualied service personnel. Follow
the instructions in this manual when replacing the
battery.
Heat
- The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including ampliers) that produce
heat.
Maximun in the power connector
- Ensure that the voltage applied to the power
connector does not exceed 15V. Higher voltages
could damage the equipment
Maximum current consumed by the meter: 2A
Battery
- Battery must be replaced by qualied personnel.
- If the battery is replaced, the new one must have
the same features.
- Battery features:
Li-Ion
2600mAh 7.26V 19 Wh
Symbols and safety labels
Recycle or dispose of used electrical and
electronic devices properly.
Replace the batteries only with the same
type.
Input power / Alimentación: 12V ; 2A, 24W
0916
Ref. 593304
Recycle or dispose of used electrical and
electronic devices properly.
H30Flex
100% Designed, Developed, and
Manufactured by Televes Corporation
Replace the batteries only with the same type.
Reemplace las baterías sólo por el tipo
recomendado.
Deposite los residuos de aparatos eléctricos y
electrónicos en los contenedores al efecto.
S.N.- 09169999900011
Made in Spain
DVB-S/S2 + DVB-T/T2 + DVB-C
A00383
Connector / Conector: P1J
Sample. Not for sale
Input power / Alimentación: 12V ; 2A, 24W
0916
Ref. 593304
Recycle or dispose of used electrical and
electronic devices properly.
H30Flex
100% Designed, Developed, and
Manufactured by Televes Corporation
Replace the batteries only with the same type.
Reemplace las baterías sólo por el tipo
recomendado.
Deposite los residuos de aparatos eléctricos y
electrónicos en los contenedores al efecto.
S.N.- 09169999900011
Made in Spain
DVB-S/S2 + DVB-T/T2 + DVB-C
A00383
Connector / Conector: P1J
Sample. Not for sale

EN
5
Overview
Introducing the H30FLEX.
New from Televes, a go-to meter designed with the
needs of a DVB installator in mind.
The H30FLEX is a light weight, rugged unit,
packed with all the features needed to install and
troubleshoot a television system using DVB-S/S2,
DVB-T/T2, DVB-C (Annex A/C) and QAM (Annex B)
digital modulation as well as analog signals.
Available for the rst time in such a portable and
aordable package, its real time digital processing
engine gives the installers a great precision
measurements needed in today’s fullment
environment.
Key Features
User friendly, handheld DVB meter.
Complete portfolio of Analog/Digital
measurements with easy-to-read pass/fail
indicators.
Quick and easy to use interface with features
such as Channel measurements, System Scans,
Constellation Diagram, Spectrum Analyzer,
Echoes, Datalogger, and more.
Rugged, light weight, fully automatic, fast, and
accurate.
Easy updates.
1 GHz spectrum range with selectable span.
PASS/FAIL Indicators: Icons indicate if a
measurement is good, bad, or in the warning
zone for quick and easy status checks. Reduce
installer entry errors and improve decision
making.
LNB powering, and SCR and DiSEqC parameters
setup
MPEG image visualization

H30FLEX handheld DVB meter / Analyzer
6
General Specifications
Display 2.8”TFT 400 x 240 full colour
Weight 510g (12.12lb)
Dimensions 175 x 100 x 52 mm / 6.9 x 3.9 x 2 in (H x W x D)
AC Adaptor Input: 100-240V~ 50-60Hz
Output: 12VDC, 2A
Battery LiIon smart battery (7.2VDC, 2300mAh)
Operating Time Up to 4 hours
Operating Temperature 23ºF to 104ºF (-5ºC to 45ºC)
Storage Temperature -4ºF to 158ºF (-20ºC to 70ºC)
Humidity 5% to 95% non-condensing
Ruggedness Survives 1 m (3 ft) drop to concrete on all sides
Communication
Interfaces USB 2.0 to download Datalogs and software updates
Storage 400 MB (internal) for measurements
Power up time < 10 seconds

EN
7
Technical Specifications
Frequency
Range 50 - 880 MHz and 950 - 2200 MHz
Resolution 125 kHz
Tuning Frequency or channel
Input
Impedance 75Ω F-type connector
Spectrum Analyzer
Span 5, 10, 20, 50, 100, 200, 500 and Full span
Scale 5 and 10 dB/div
Auto and manual
reference level
Digital Measurements DVB-T (ref.593301, 593302, 593304 and
opc.593231)
MPEG image
Modulations CFDM (QPSK, 16QAM, 64QAM)
Power 45-110dBuV (25-120dBuV opt.593235)
CBER 9.9E-2 - 1.0E-6
VBER 1.0E-3 - 1.0E-8
MER Up to 35dB
C/N Auto
Echoes
Constellation
Digital Measurements DVB-T2 (ref.593302, 593304 and opc.593232)
MPEG image
Modulations COFDM (QPSK, 16QAM, 64QAM and 256QAM)
Power 45-110dBuV (25-120dBuV opt.593235)
LDPCBER 9.9E-2 - 1.0E-6
BCHBER 1.0E-3 - 1.0E-8
Link Margin Up to 30dB
MER Up to 35dB
C/N Auto
Echoes
Constellation
Digital Measurements DVB-C (ref.593303, 593304 and opc.593233)
MPEG image
Modulations 16QAM, 32QAM, 64QAM, 128QAM and 256QAM
Power 45-110dBuV (25-120dBuV opt.593235)
CBER 1.2E-2 - 1.0E-8
MER Up to 38dB
C/N Auto
Constellation
Digital Measurements QAM-B [ITU J.83-B] (ref.593360)
MPEG image
Modulations 64QAM and 256QAM
Power 45-110dBuV (25-120dBuV opt.593235)
Pre-BER y Post-BER 1.0E-3 - 1.0E-8
MER Up to 38dB
C/N Auto
Constellation
Digital Measurements (DVB-S)
MPEG image
Power 45-110dBuV (25-120dBuV opt.593235)
CBER 9.9E-2 - 1.0E-6
VBER 1.0E-4 - 1.0E-8
MER Up to 20dB
C/N Auto
Constellation
Digital Measurements (DVB-S)
MPEG image
Modulations QPSK, 8PSK
Power 45-110dBuV (25-120dBuV opt.593235)
Link Margin Up to 10dB
MER Up to 20dB
LDPCBER 9.9E-2 - 1.0E-6
BCHBER 9.9E-2 - 1.0E-8
Constellation
Analog Measurements
Level 25 - 125dBuV
V/A
C/N
Features
Terrestrial channel
plans CCIR, CCIR + LTE, OIRT, KBW, FCC, DAB, SIM
Satellite channel
plans
68E INTEL C, 68E INTEL, 42ETURK, 39E HELLAS,
33E EUTEL, 28E EUTEL, 28E ASTRA, 26E BADR,
25E EUTEL, 23E ASTRA, 21E EUTEL, 19E ASTRA,
16E EUTEL, 13E HOTB, 10E EUTEL C, 10 EUTEL,
9E EUTEL, 7E EUTEL, 4E ASTRA, 1W THOR5, 1W
THOR6, 5W EUTELC, 5W EUTEL, 7W NILE, 30W
HISPA, 48W AMZC, 48W AMAZ, SIM.
User channel plans
Units dBuV, dBmV, dBm
Preamp powering 13, 18, 24Vdc (max. current 475, 370, 140mA)
LNB powering 13, 18Vdc (max. current 475, 370mA)
LNB tone 22KHz
SCR (EN 50494) | dCSS
(EN 50607) | Opt.593234
DiSEqC
Specications are subject to change without notice.

H30FLEX handheld DVB meter / Analyzer
8
Description of equipment
components
Connectors and controls
1. External power connector (12VDC).
2. LCD display.
3. Keyboard and LED indicators
4. USB connector
5. RF F-connector (see options below).
Keyboard
1. Device On/O button: To turn the
equipment o, press and hold for
approximately 3 seconds.
2. Back button: Return to the previous
menu or close a parameter entry window.
3. Home button: Return to the main menu.
4. Navigation buttons: Used to scroll through
options.
5. OK Button: To conrm selection.
6. Setup button: Parameter window for the
current function.
7. LED Powering: Indicates if the equipment is
powering an external load.
8. LED Charging Battery: LED ashes while the
battery is charging.
9. LED Power ON: Illuminated when the
equipment is on.
F-connector options
1
23
4
5
1
2
3
4
5
6
9 8 7
4

EN
9
Power supply
A DC adapter is provided to power and charge the
meter. Plug the adapter into a properly grounded
electrical supply and the power connector on the
side of the unit.
When external power is supplied, the battery
management system automatically controls the
charging process.
A battery icon indicates the charge status of the
battery.
When the battery is fully charged, the battery icon
is completely lled. As the battery discharges, the
amount the icon is lled decreases in steps.
The icon shows 5 states representing the
approximate battery charge:
    
- Battery charge less than 5%.
    
- Battery charge between 5% and 25%.
    
- Battery charge between 25% and 50%.
    
- Battery charge between 50% and 75%.
    
- Battery charge greater than 75%.
From a fully discharged state, a full charge takes
approximately 8 hours and a 3 hour charge will
provide approximately a 75% charge.
The charge management system will detect
various conditions preventing charging, such as a
battery that is over a safe temperature.
Battery Recommendations
To maximize battery life:
Avoid fully discharging the battery.
The battery should always be charged with the
battery pack attached to the device and using
the supplied DC adapter or applying a constant
voltage within the specied range (12-15VDC).
For long term storage, keep the unit at room
temperature, or about 25º C. Start with a charged
battery and re-charge the battery every 2 to 3
months.
Battery replacement:
It is recommended that the replacement of the
battery is carried out by qualied personnel
following the following instructions:
Disconnect the meter from the power supply:
> 3 sec.
OFF:

H30FLEX handheld DVB meter / Analyzer
10
Turn the H30FLEX o
Remove the screws from the backside
Open the back cover
The battery is located at the bottom of the meter.
Carefully remove the connector from the power
board, and then remove the battery
> 3 sec.
OFF:
> 3 sec.
OFF:
> 3 sec.
OFF:
> 3 sec.
OFF:
Place the new battery and then connect it to the
power board
Replace the back cover of the meter. Make sure
that the cable is not trapped between the two
covers
Replace the screws of the back cover
> 3 sec.
OFF:
> 3 sec.
OFF:
> 3 sec.
OFF:

EN
11
Before starting
The rst time you tunr your H30FLEX on, please
follow the next steps for a proper conguration:
1.- Select the language using and
2.- Select the geographical area, so the proper
channel plans will be enabled:
2.- Register you H30FLEX:
2.1.- Read the QR code using your mobile phone or
tablet.Or enter the web url shown at the botton of
the screen in the address
bar of your computer:
2.2.- Register your H30FLEX in our web. Once the
process is completed, you will get a PIN code. Enter
the PIN in your H30FLEX:
2.3.- If the PIN is OK, you have nished the registra-
tion process.
NOTE: Options 593234 (dCSS) and 593235 (Exten-
ded terrestrial input level range) will be activated
automatically in your H30FLEX whenever you re-
gister it within 30 days after you turn it on for the
rst time.
Product operation
1. Channel Info
Analog and digital channels are very dierent in
terms of signal content and power distribution
and thus require the advanced SLM techniques
provided in the Televes H30FLEX.
In analog mode, video and audio levels, V/A and
Carrier to Noise (C/N) are measured.
In digital mode measurements depend on the
modulation:
DVB-S: Power, C/N, MER, CBER, VBER
DVB-S2: Power, C/N, MER, LDPCBER, BCHBER
DVB-T (Ref. 593301, 593302, 593304 and Opt. 593231): Power,
C/N, MER, CBER, VBER
DVB-T2 (Ref. 593302, 593304 and Opt. 593232): Power, C/N,
Link Margin, LDPCBER, BCHBER
DVB-C (Ref. 593303, 593304 and Opt. 593233): Power, C/N,
CBER, MER
QAM-B [ITU j.83-B] (Ref. 593360): Power, C/N, CBER,
MER
1.1. Main window

H30FLEX handheld DVB meter / Analyzer
12
Below is a capture of a Channel Info window with a
brief explanation of its features.
Channel
plan
Frequency
Channel
Change using
Bar graph of main
measurement.
Color according to
checkmarks
List of measurements
with pass/fail indicators
1.2. Setup
Press to change the Channel Info options.
- Tuning: Channel, Frequency
- A/D: Auto, Analog, Digital
- Band: Ter, Sat
- LNB
- Save datalog: Saves the current
measurements. You can see the datalogs
using the remote control application.
2. Spectrum
Real-time processing speeds ensure capture of any
fast, intermittent plant impairments.
Due to the accuracy and level of detail provided by
this spectrum analyzer, the H30FLEX is the ideal
tool for identifying and locating noise, interference,
ingress and other waveforms that may be aecting
cable services quality.
2.1. Main window
Below is a capture of a Spectrum window with a
brief explanation of its features:
Span
User can change it using
(+) or ( - )
List of
measurements
with pass/fail
indicators
Reference level
Change
Selected channel
Change using
2.2. Setup
Press to change Spectrum options.

EN
13
- Band: Terrestrial/Satellite
- Powering: Selects the LNB powering
- DiSEqC (only satellite band): Selects DiSEqC
parameter (Sat A, sat B, sat C, sat D)
- SCR (only satellite band): Selects the SCR
parameters (multiswitch, standard and slots)
- Aim antenna: Emits a modular audible
signal with frequency directly proportional
to signal level in the spectrum trace relativo
to reference level. It is recommended to set
the reference level manually, as well as to
select the span to include a frequency range
wide enough.
The audible signal becomes continuous when
the signal leves is close to the reference level.
Then it is necessary to increase the reference
level to get a more accurate adjustment.
This is a useful feature to point antennas
without having to look at the display
- Span: 5MHz, 10MHz 20MHz, 50MHz, 100MHz,
200MHz, 500MHz, Full.
Set the span of the spectrum. To easily change
the span, use the OK Button to decrease the
span and the Back Button to increase the span.
- Ref. Level: Select the reference level of the
spectrum graph
- dB/div: 5 dB/div, 10 dB/div
- Tuning: Channel, Frequency
- A/D: Auto, Analog, Digital.
- Save datalog: Saves the current scan
measurements. You can see the datalogs
using the remote control application.
3. MPEG
The H30FLEX’s MPEG feature will show the image
of the selected service.
3.1. Main window
Below is a capture of a MPEG Info window with a
brief explanation of its features:
Selected channel
Change using
4. System Scan
This function scans the selected channel plan and
detects every existing analog and digital channel
in real time to determine the overall frequency
response of the system.
The scan measurement leverages the location
based thresholds to clearly show whether or
not signal levels comply with the cable system’s
specications with their green, yellow and red bars.
Press OK button to see
the services list

H30FLEX handheld DVB meter / Analyzer
14
This gives an easy-to-understand real-time view of
the system, including the BER and MER values of
the selected channel.
4.1. Main window
Below is a capture of a System Scan window with a
brief explanation of its features:
Bar graph representing all the found channels.
Color according to checkmarks
Channel
plan
Measurements
of the selected
channel
with pass/fail
indicators
Channel
Change
using Frequency
4.2. Setup
Press to change the System Scan options.
- Digital tuning: If it is ON, allows to see MER
and CBER measurements when a digital
channel is selected and the user presses Ok
button.
- Ref. Level: Select the reference level of the
bar graph
- Span: Select the number of channels showed
in the bar graph
- Band: Terr, Sat
- LNB
- Save datalog: Saves the current scan
measurements. You can see the datalogs
using the remote control application
5. Satellite Test
This function checks that the input signal
corresponds to the selected satellite, and at the
same time checks the proper reception of the
selected transponders (from 1 to 4 transponders).
To do that, the meter performs all the
measurements on those transponders.
First of all the user must select the channel plan of
the satellite towards which the antenna is oriented.
Then the user must select the transponders on
which you want to carry out the measurements
(see Setup section of this function).
The information necessary to verify the satellite
is extracted from these channels, and the
measurements of the selected transponders are
displayed.
5.1. Main window

EN
15
List of measurements
with pass/fail indicators
Press OK to see all the
measurements
Bar graph representing
the selected channels
Color according to
checkmarks
Selected channel
Change using
5.2. Setup
Press to change the Ssatellite Test options.
- Powering: Select the powering of the LNB if
needed.
- DiSEqC: Select the SAT of the DiSEqC
command.
- SCR: Select all the parameters needed to
setup the SCR coomand.
- Ref. Level: Select the reference level of the
bar graph.
- Channels: Select the number of channels as
well as the channels from the channel plan.
6. Learning plan
Analyzes the input signal to the meter and
automatically detects all channels.
This feature automatically identies the channels
as either analog or digital and performs
measurements on each.
A bar graph is displayed with the height
representing the power for digital channels and the
level of the video carrier for the analog channels.
The measurements made for analog channels are
video carrier level and V/A. For digital channels the
measurements are power and C/N.
The analog channels will have an extra, smaller
white bar indicating the level of the audio carrier.
6.1. Main window
Below is a capture of a Learning Plan window with
a brief explanation of its features:
List of measurements
with pass/fail indicators
Bar graph representing
found channels
Color according to
checkmarks
Indicates that the
scan is nished.
Press to save
the plan
Selected channel
Change using
Satellite checked

H30FLEX handheld DVB meter / Analyzer
16
7. Constellation
Digital video often does not show signal
impairment until it is too late due to the small
margin between acceptable quality and failure.
Constellation diagrams are an indispensable tool
to help detect the presence of noise, phase jitter,
interference, and gain compression, all of which
impact overall signal quality and thus reduce
Modulation Error Ratio (MER).
Ideally, each of the symbols in a constellation
diagram should display a clean dot indicating a
perfect signal.
The H30FLEX’s real time constellation, allows the
installer to assess the size and shape of the build
up of dots indicative of problems which contribute
to bit errors leading to service disruption
7.1. Main window
Below is a capture of a Constellation window with
a brief explanation of its features:
Modulation
List of measurements
with pass/fail indicators
Constellation
diagram
Selected channel
Change using
7.2. Setup
Press to change Constellation options.
- Zoom: OFF, 1st, 2nd, 3rd, 4th.
Select a quadrant of the constellation to be
represented for more detailed view. Select
Zoom OFF for the full constellation.
- Tuning: Channel, Frequency
- Band: Terr, Sat
- LNB
- Save datalog: Saves the current scan
measurements. You can see the datalogs
using the remote control application.
8. Echoes
It is important to check that no echoes can cause
problems in the reception of DVB-T and DVB-T2
signals.
This feature you allows to visualize the echoes
of the received signal, helping the installer to
minimize them as much as possible for optimal
signal reception.
In addition to the echoes graph, this function
shows the channel power and MER measurements,
as well as the FFT mode, the guard interval, and the
Cell ID.
8.1. Main window
Below is a capture of a Ecos window with a brief
explanation of its features:

EN
17
List of measurements with
pass/fail indicators
and number of echoes
Echoes graph
Selected channel
Change using
8.2. Setup
Press to change Echoes options.
- Powering: O, 13V, 18V, 24V.
- Tuning: Channel, Frequency
- Units: us, Km
9. Setup
Change main conguration settings:
- Band: Terr, Sat
- Ter. Network: Aerial, Cable
- Terr Plan: FCC STD, FCC RETURN, FCC IRC,
FCC HRC, FCC OFFAIR, CCIR, and customers
plans
- Sat Plan: F68E INTEL C, 68E INTEL, 42E TURK,
39E HELLAS, 33E EUTEL, 28E EUTEL, 28E
ASTRA, 26E BADR, 25E EUTEL, 23E ASTRA, 21E
EUTEL, 19E ASTRA, 16E EUTEL, 13E HOTB, 10E
EUTEL C, 10 EUTEL, 9E EUTEL, 7E EUTEL, 4E
ASTRA, 1W THOR5, 1W THOR6, 5W EUTELC,
5W EUTEL, 7W NILE, 30W HISPA, 48W AMZC,
48W AMAZ, SIM, and customers plans
- Sat. Freq.: IF, real Freq.
-Sat. LNB: Universal, C Band, Other.
If Other is selected, you must enter the
frequency.
- Language: English, Español.
- Units: dBµV, dBmV, dBm
- Quality proles: Trunk, Tap, End Line,
Ground.
Dierent thresholds are available for dierent
testing locations.
- Analog Standard: Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier: 4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
-Volume
- Time and Date:
Set current time (hour and minutes) and
date (day of the month, month and year).
- Energy:
Auto suspension
FFT mode, Guard
Interval, and Cell ID

H30FLEX handheld DVB meter / Analyzer
18
Auto shutdown
- USB Storage: Connect your H30FLEX to your
computer using the USB connector and turn
USB Storage ON, so you can use your H30FLEX
as a storage unit.
- Update rmware: See section Firmware
update
- Reset conguration: Resets the H30FLEX to
factory settings
- Licenses: Shows a list with all the licenses
included in your H30FLEX
- About SW
- About HW
Driver Installation
1. Connect your H30FLEX to your computer using
the USB
2.- Depending on your Windows versión and con-
guration, it may happen that your computer in-
stalls automatically the corresponding driver.
3.- If it does not occur, you must follow the next
steps:
3.1.- Open the Control panel
3.2.- Select Device Manager
3.3.- Select Other devices and right-click on it
3.4.- Select Update driver
3.5.- Select the option that allows you to nd the
driver in your computer.
3.6.- Select Network adapters from the list
3.7.- Select Microsoft Corporation from the list of
manufacturers and Remote NDIS based Internet
Sharing Device from the list of network adapters:
3.8.- Wait until the driver is installed

EN
19
Web Application
Once you have installed the corresponding driver,
open a web browser in your computer (Chrome
recommended).
Type http://h30.ex in the address bar of your
web browser and press Enter.
Then you can see the home window of the
H30FLEX web application:
1. Measurements
In this window, you can see all the datalogs saved
in your H30FLEX. They are grouped by date in a
calendar:
H30FLEX info
Menu bar
Month search
Change calendar/
list display mode
Filter according to
channel type Saved Datalogs
To change the display mode from calendar mode
to list mode, just click on the corresponding button
placed at the top of the left button panel:
Using the buttons placed at the top right os the
screen, you can remove the selected Datalogs or
download them to your computer in .xls format
(it will be generated a .xls le for each Datalog and
they all will be downloaded together in a .zip le)
Clicking on a Datalog of the list, the measurements
of that Datalog will be displayed:
Download/
remove the
selected Datalogs
Change calendar/
list display mode
Filters according to
channel type Datalogs list
Select/unselect all the
Datalogs
Remove/print/
export to xls
Date of the measurement,
serial number
and channel plan
Channel measurements
Filter according to channel type

H30FLEX handheld DVB meter / Analyzer
20
2. Plans
In this window, you can see all the channel plans
of your H30FLEX.
They are grouped in three categories: Terrestrial,
Satellite and Customer.
The Terrestrial and Satellite channel plan are the
standard channel plans of the corresponding band.
These plans can be removed from the meter, but
they can not be edited. However, you can make
a copy of one of them to build a new customer
channel plan from it.
The duplicated plans will appear in the Customer
list automatically.
The customer channel plans can be edited:
Channel plans list
Create a new channel plan
Elimina el plan
Create a duplicate of the plan
Duplicate/remove/
save the plan
Type in the cells to
edit the data
Add a new channel Remove the channel
You can create a new channel plan from an existing
one by clicking on the corresponding button. Or
you can start from scratch, by clicking on the “New
custom plan” button:
The application also allows to congure the chan-
nel plans according to the geographic area you will
use the meter. When you turn the meter on for the
rst time, you must select the languaje and the,
you must select the geographic area. So, the chan-
nel plans corresponding to that area will be availa-
ble in your H30FLEX. Using the function“Congure
plans by zone”, you can change the gegraphic area
whenever you want:
When you change the area, all the plans of your
H30FLEX will be removed and the new channell
plans corresponding to the selected area, will be
upload to your meter.
Duplicate/remove/
save the plan
Type in the cells to
edit the data
Add a new channel
One you have selected the
area, click this button
List of available areas