Televes MOSAIQ 6 User manual

1
24
3
4
4
5
3
3
Multi-touch Meter/Analyser
1.- Battery charge 2.- ON/OFF
ON
OFF (>3 sec.)
1. Device ON/OFF button: To turn the
equipment off, press and hold for more
than 3 seconds. If the Mosaiq6 is ON,
press ON/OFF button to enable/disable
the touch-screen
2. Menu button: First press: features
menu is shown. Second press: context
menu is shown. Third press: all menus
are hidden
3. Up/Down buttons: Changes channel
4. Left/Right buttons: Changes screen in
multi screen features
5. OK button: Selects an option
4.- Keyboard
5.- Gestures
Tap: one fast touch with one finger
Select menu/option/check.
Double tap: two fast consecutive
touches with one finger
Widget <=>Full screen.
Swipe: short swipe with one finger
Shows menus (see section 8.- Menus)
Spectrum =>changes channel.
Drag: drag with one finger
Main menu wheel =>feature search.
TV and Radio Analyser =>switches
between screens.
Spectrum/Echoes/Measurements =>
moves markers.
Pinch/Spread: pinch/spread two
fingers on the screen
Spectrum =>changes span.
Constellation =>zoom in/out.
Drag and drop
Spectrum =>changes tuned channel,
dropping it to the centre of the
spectrum.
6.- Bottom bar
Tap to direct access to TV Analyser feature
Tap to change channel/freq. tuning
Tap to change tuned channel
Tap to change selected service
Tap to change band
Tap to change user prole
Tap to run MacroLOG
Tap to save LOG
Quick Guide
3.- Registration process
The first time you turn
your Mosaiq6 on, you will
see a message asking you
to register your Mosaiq6
in our web within 30 days.
First of all please register yourself on our website (www.televes.com). You will need
your user name and password to register your Mosaiq6.
Follow the steps shown in the screen. Further details in the user manual.
Enter the user name and
password you use on our
website. Press skip to cancel the
registration process.
You can use your Hexylon
During the next 30 days, each
time you turn your Mosaiq6 on,
the message will appear.
You must have connection
to the internet.
Select Ethernet or Wi-Fi.
Skip
Skip
Mosaiq6 is connected
to the internet

Reference
596101 MOSAIQ6
596111 MOSAIQ6 selective O.F.
9.- Reset
Press OK button >10 seconds
8.- Battery pack replacement
8.1.- Disconnect the meter from the power
supply:
8.2.- Turn the meter off: 8.3.- The battery pack is placed in the
botton-back side:
8.4.- Lift the fixings washers and rotate
them 90º. You’ll notice that the fixings
get out automatically allowing to
remove the battery pack:
8.5.- Put the new battery pack and rotate the
fixings washers again until the fixings fit
into the device:
8.6.- Turn your Mosaiq6 on:
7.- Menus
Top menu
(swipe on the top-central part of the screen)
Access to:
• Inputs/outputs
• Powering
• Settings (brightness, volume, headphones,
GPS, network, Wi-Fi)
Main menu
(swipe on the right-central side of the screen)
Access to:
• Settings
• User profiles
• Features
• LOGs
Top menu
(swipe on the left-central part of the screen)
Access to:
• Specific options of each feature
2018 © Copyright, Televés S.A.
10.- Safety
Li-ION
battery
>15V
User
Manual
Subjects may change without notice
www.televes.com