Televes MOSAIQ6 User manual

1
24
3
4
5
3
Multi-touch Meter/Analyser
1.- Battery charge 2.- ON/OFF
ON
OFF (>3 sec.)
1. Device ON/OFF button: To turn the
equipment o, press and hold for more
than 3 seconds. If the MOSAIQ6 is ON,
press ON/OFF button to enable/disable
the touch-screen
2. Menu button: First press: features
menu is shown. Second press: context
menu is shown. Third press: all menus
are hidden
3. Up/Down buttons: Changes channel
4. Left/Right buttons: Changes screen in
multi screen features
5. OK button: Selects an option
4.- Keyboard
5.- Gestures
Tap: one fast touch with one
nger
Select menu/option/check.
Double tap: two fast consecutive
touches with one nger
Widget <=> Full screen.
Swipe: short swipe with one
nger
Shows menus (see section 8.-
Menus)
Spectrum => changes channel.
Drag: drag with one nger
Main menu wheel => feature
search.
TV and Radio Analyser => switches
between screens.
Spectrum/Echoes/Measurements
=> moves markers.
Pinch/Spread: pinch/spread two
ngers on the screen
Spectrum => changes span.
Constellation => zoom in/out.
Drag and drop
Spectrum => changes tuned
channel, dropping it to the centre
of the spectrum.
6.- Bottom bar
Tap to direct access to TV Analyser feature
Tap to change channel/freq. tuning
Tap to change tuned channel
Tap to change selected service
Tap to change band
Tap to change user prole
Tap to run MacroLOG
Tap to save LOG
Quick Guide
3.- Registration process
The rst time you turn your
MOSAIQ6 on, you will see
a message asking you to
register your MOSAIQ6 in
our web within 30 days.
First of all, please, register yourself on our website (https://register.televes.com/).
You will need your user name and password to register your MOSAIQ6.
Follow the steps shown in the screen. Further details in the user manual.
Enter the user name and
password you use on our
website.
Registration completed
successfuly.
You get the warranty
extension for free
Press skip to cancel the
registration process.
You can use your MOSAIQ6
During the next 30 days,
each time you turn your
MOSAIQ6 on, the message
will appear.
You must have connection
to the internet.
Select Ethernet or Wi-Fi.
Skip
No
Skip
MOSAIQ6 is connected to the internet

Reference
596101 MOSAIQ6
596111 MOSAIQ6 selective O.F.
9.- Reset
Press OK button >10 seconds
8.- Battery pack replacement
8.1.- Disconnect the meter from the power
supply:
8.2.- Turn the meter o: 8.3.- The battery pack is placed in the
botton-back side:
8.4.- Lift the xings washers and rotate
them 90º. You’ll notice that the xings
get out automatically allowing to
remove the battery pack:
8.5.- Put the new battery pack and rotate the
xings washers again until the xings t
into the device:
8.6.- Turn your MOSAIQ6 on:
7.- Menus
Top menu
(swipe on the top-central part of the screen)
Access to:
• Inputs/outputs
• Powering
• Settings (brightness, volume, headphones,
GPS, network, Wi-Fi)
Main menu
(swipe on the right-central side of the screen)
Access to:
• Settings
• User proles
• Features
• LOGs
Top menu
(swipe on the left-central part of the screen)
Access to:
• Specic options of each feature
2018 © Copyright, Televés S.A.
10.- Safety


>15V
User
Manual
Subjects may change without notice
A00421
RF
>+58V
<-18V
>18V
Televés S.A. Rúa B. de Conxo, 17 - 15706 Santiago de Compostela - Spain Tel.: [phone] www.televes.com