Telit Wireless Solutions E866 Series User manual

1VV0301260 Rev.2 2016-09-01
XE866 INTERFACES USER
GUIDE
Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 2 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
APPLICABILITY TABLE
GE866-QUAD INTERFACE
3990251275
UE866-N3G INTERFACE
3990251273
LE866-SV1 INTERFACE
3990251313
LE866A1-KK INTERFACE
3990251343
Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 3 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
DISCLAIMER
LEGAL NOTICE
These Specifications are general guidelines pertaining to product selection and application and may not
be appropriate for your particular project. Telit (which hereinafter shall include, its agents, licensors and
affiliated companies) makes no representation as to the particular products identified in this document
and makes no endorsement of any product. Telit disclaims any warranties, expressed or implied, relating
to these specifications, including without limitation, warranties or merchantability, fitness for a particular
purpose or satisfactory quality. Without limitation, Telit reserves the right to make changes to any
products described herein and to remove any product, without notice.
It is possible that this document may contain references to, or information about Telit products, services
and programs, that are not available in your region. Such references or information must not be
construed to mean that Telit intends to make available such products, services and programs in your
area.
USE AND INTELLECTUAL PROPERTY RIGHTS
These Specifications (and the products and services contained herein) are proprietary to Telit and its
licensors and constitute the intellectual property of Telit (and its licensors). All title and intellectual
property rights in and to the Specifications (and the products and services contained herein) is owned
exclusively by Telit and its licensors. Other than as expressly set forth herein, no license or other rights
in or to the Specifications and intellectual property rights related thereto are granted to you. Nothing in
these Specifications shall, or shall be deemed to, convey license or any other right under Telit’s patents,
copyright, mask work or other intellectual property rights or the rights of others.
You may not, without the express written permission of Telit: (i) copy,reproduce, create derivative works
of, reverse engineer, disassemble, decompile, distribute, merge or modify in any manner these
Specifications or the products and components described herein; (ii) separate any component part of
the products described herein, or separately use any component part thereof on any equipment,
machinery, hardware or system; (iii) remove or destroy any proprietary marking or legends placed upon
or contained within the products or their components or these Specifications; (iv) develop methods to
enable unauthorized parties to use the products or their components; and (v) attempt to reconstruct or
discover any source code, underlying ideas, algorithms, file formats or programming or interoperability
interfaces of the products or their components by any means whatsoever. No part of these
Specifications or any products or components described herein may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language, in any
form or by any means, without the prior express written permission of Telit.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 4 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
HIGH RISK MATERIALS
Components, units, or third-party products contained or used with the products described herein are
NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control
equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear
Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or
Weapons Systems (“High Risk Activities"). Telit, its licensors and its supplier(s) specifically disclaim any
expressed or implied warranty of fitness for such High Risk Activities.
TRADEMARKS
You may not and may not allow others to use Telit or its third party licensors’ trademarks. To the extent
that any portion of the products, components and any accompanying documents contain proprietary and
confidential notices or legends, you will not remove such notices or legends.
THIRD PARTY RIGHTS
The software may include Third Party Right software. In this case you agree to comply with all terms
and conditions imposed on you in respect of such separate software. In addition to Third Party Terms,
the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third
Party Right software.
TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY
THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED
IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED
(COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL THE OTHER CODE IN
CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES
OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE.
NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING
WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE UNDER
CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT OF THE USE OR
DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER
EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE
FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Copyright © Telit Communications PLC.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 5 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
CONTENTS
1INTRODUCTION 8
Scope 8
Audience 8
Contact Information, Support 8
List of acronyms 9
Text Conventions 10
1.6. Related Documents 10
2OVERVIEW 11
3GE866-QUAD Interface 12
Description 12
Physical dimensions 12
Interface Details 13
Connectors Position 13
Jumpers Setting 14
SO101 & SO104 - EVK2 Connection 15
Antenna Connectors 19
3.3.4.1 SO103 - MAIN Antenna connector 19
PL105 - Power Supply Setting 19
SIM Holder and SIM Detection 20
RESET 20
STAT LED 20
Expansion Connectors 21
3.3.9.1 PL101 21
3.3.9.2 PL202 23
Audio Section and Settings 24
3.3.10.1 Audio Codec 24
3.3.10.2 Audio Inputs 24
3.3.10.2.1 Microphone Input 24
3.3.10.3 Audio Outputs 25
3.3.10.3.1 EAR Output 25
3.3.10.4 PL301 –Audio Settings 26
3.3.10.4.1 DVI and I2C Connections 26
3.3.10.4.2 Audio Path Settings 26
3.3.10.5 Speaker connections 27
Audio Accessories 28
3.3.11.1.1 Headset Specification 28
Stand-alone setup 29
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 6 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
FIRMWARE UPDATE 29
Interface Schematics 30
Components Layout 34
4UE866-N3G Interface 35
Description 35
Physical dimensions 35
Interface Details 36
Connectors Position 36
Jumpers Setting 37
SO101 & SO104 - EVK2 Connection 38
Antenna Connectors 42
4.3.4.1 SO103 - GSM Antenna connector 42
PL105 - Power Supply Setting 42
SIM Holder and SIM Detection 43
USB 43
RESET 43
STAT LED 43
Expansion Connectors 44
4.3.10.1 PL101 44
4.3.10.2 PL202 46
Audio Section and Settings 46
4.3.11.1 Audio Codec 46
4.3.11.2 Audio Inputs 47
4.3.11.2.1 Microphone Input 47
4.3.11.3 Audio Outputs 48
4.3.11.3.1 EAR Output 48
4.3.11.4 PL301 –Audio Settings 49
4.3.11.4.1 DVI and I2C Connections 49
4.3.11.4.2 Audio Path Settings 49
Audio Accessories 51
4.3.12.1.1 Headset Specification 51
Stand-alone setup 52
FIRMWARE UPDATE 52
Interface Schematics 53
Components Layout 57
5LE866 Interface 58
Description 58
Physical dimensions 58
Interface Details 59
Connectors Position 59
Jumpers Setting 60
SO101 & SO104 - EVK2 Connection 61
Antenna Connectors 65
5.3.4.1 SO103 - Main Antenna connector 65
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 7 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
5.3.4.2 SO106 - Diversity Antenna connector 65
PL105 - Power Supply Setting 65
SIM Holder and SIM Detection 66
USB 66
RESET 66
STAT LED 66
Expansion Connectors 67
5.3.10.1 PL101 67
5.3.10.2 PL202 69
Stand-alone setup 70
FIRMWARE UPDATE 70
Interface Schematics 71
Components Layout 75
6SAFETY RECOMMENDATIONS 76
Disposal of this product in the European Union 77
Disposal of this product in other countries outside the European Union 77
7DOCUMENT HISTORY 78
Revisions 78
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 8 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
1 INTRODUCTION
Scope
The Aim of this document is the handling description of the EVK2 Interfaces for the products based on
xE866 Form Factor.
Audience
All given information shall be used as a guide and a starting point for properly developing of your product.
Obviously this document cannot cover all the hardware solutions and products that may be designed.
Contact Information, Support
For general contact, technical support services, technical questions and report documentation errors
contact Telit Technical Support at:
[e-mail]
TS-AMERICA[email protected]
TS-APA[email protected]om
Alternatively, use:
http://www.telit.com/support
For detailed information about where you can buy the Telit modules or for recommendations on
accessories and components visit:
http://www.telit.com
Our aim is to make this guide as helpful as possible. Keep us informed of your comments and
suggestions for improvements.
Telit appreciates feedback from the users of our information.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 9 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
List of acronyms
Acronym
Description
ARFCN
Absolute Radio Frequency Channel Number
AT
Attention command
CTS
Clear To Send
DCD
Data Carrier Detect
DCE
Data Communication Equipment
DCS
Digital Cellular System
DSR
Data Set Ready
DTE
Data Terminal Equipment
DTMF
Dual Tone Multi Frequency
DTR
Data Terminal Ready
GLONASS
Global positioning system maintained by the Russian Space Forces
GNSS
Any single or combined satellite navigation system (GPS, GLONASS
and combined GPS/GLONASS)
GPRS
Global Packet Radio Service
GPS
Global Positioning System
GSM
Global System Mobile
IMEI
International Mobile Equipment Identity
ME
Mobile Equipment
NMEA
National Marine Electronics Association
RTS
Request To Send
SMS
Short Message Service
TE
Terminal Equipment
LTE
Long Term Evolution
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 10 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
Text Conventions
Danger –This information MUST be followed or catastrophic equipment failure
or bodily injury may occur.
Caution or Warning –Alerts the user to important points about integrating the
module, if these points are not followed, the module and end user equipment
may fail or malfunction.
Tip or Information –Provides advice and suggestions that may be useful when
integrating the module.
All dates are in ISO 8601 format, i.e. YYYY-MM-DD.
1.6. Related Documents
Telit EVK2 User Guide (1VV0300704)
GE866-QUAD HW User Guide (1VV0301051)
UE866-N3G HW User Guide (1VV0301157)
LE866 HW User Guide (1VV0301210)
Telit AT Commands User Guide (80000ST10025a)
Telit 3G Modules AT Commands Reference Guide (80378ST10091a)
LE866 Series AT Commands Reference Guide (80471ST10691A)
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 11 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
2 OVERVIEW
The Telit Evaluation Kit (EVK2) provides a robust, future-proof and flexible environment to streamline
all application development based on Telit GSM/GPRS, UMTS/HSPA, CDMA 1x/EV-DO, and LTE
module families, significantly reducing time-to-market.
The EVK2 kit includes a motherboard where to connect the Interface board of a Telit module.
This concept allows the EVK2 to be used across various form factors and product generations, both
present and future.
The motherboard includes the basic interfaces such as power input, SIM card holder, audio monitor
outputs, RS-232, and USB; as well as a Reset button and power switch. The circuit implemented in the
EVK2 motherboard is based on the recommended reference design for the module's peripheral
components and I/O connections.
Adapter boards are available for all the different module families.
The interface boards convert the module connection technology (board-to-board or BGA soldering) into
a PTH pin connector. The part of the basic interfaces is served by the motherboard, whereas specific
interfaces according to the type of the module (antenna, general purpose inputs/outputs GPIO,
ADC/DAC, UART) are available on the adapter board to connect it to the user applications, extension
boards, measurements equipment or other tools.
All connections are made through 2x40 contacts connectors.
It is possible to use these Interface Boards also in stand-alone mode, inserting the “not mounted”
components (related to RESET BUTTON, ON BUTTON, SIM HOLDER and STATUS LED functions)
plus the use of an external level translator circuit.
This document is describing the available Adapter Boards for the modules based on the xE866 form
factor.
NOTICE:
The information presented in this document is believed to be accurate and reliable.
However, no responsibility is assumed by Telit Communications S.p.A. for its use, nor
any infringement of patents or other rights of third parties which may result from its use.
No license is granted by implication or otherwise under any patent rights of Telit
Communications S.p.A. other than for circuitry embodied in Telit products. This document
is subject to change without notice.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 12 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
3 GE866-QUAD INTERFACE
Description
This board allows easily interfacing the GE866-QUAD modules with the EVK2 and testing their
functionalities.
Physical dimensions
Item
Value
Length
92,00 mm
Width
107,00 mm
Height
25,00 mm
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 13 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
Interface Details
Connectors Position
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 14 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
Jumpers Setting
The following picture shows the jumpers placement and their default settings.
Details in the following paragraphs.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 15 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
SO101 & SO104 - EVK2 Connection
The connections between the Interface and the EVK2 is done through two 2x40 pin female connectors
present on the bottom (SO101 and SO104). Theirs pin functions are listed in the following tables:
SO101
Pin
Signal
Type
Function
1
NC
-
Do not connect
2
TX_Aux
Digital Output
to RS232 or USB level translators
3
RX_Aux
Digital Input
from RS232 or USB level translators
4
NC
-
Do not connect
5
GND
DC voltage
Power
6
NC
-
Do not connect
7
NC
-
Do not connect
8
NC
-
Do not connect
9
NC
-
Do not connect
10
NC
-
Do not connect
11
GND
DC voltage
Power
12
GND
DC voltage
Power
13
GND
DC voltage
Power
14
GND
DC voltage
Power
15
C109/DCD
Digital Output
to RS232 or USB level translator
16
C104/RXD
Digital Output
to RS232 or USB level translator
17
C103/TXD
Digital Input
from RS232 or USB level translator
18
C108/DTR
Digital Input
from RS232 or USB level translator
19
GND
DC voltage
Power
20
C107/DSR
Digital Output
to RS232 or USB level translator
21
C105/RTS
Digital Input
from RS232 or USB level translator
22
C106/CTS
Digital Output
to RS232 or USB level translator
23
C125/RING
Digital Output
to RS232 or USB level translator
24
NC
-
Do not connect
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 16 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
SO101
Pin
Signal
Type
Function
25
GND
DC voltage
Power
26
GND
DC voltage
Power
27
GND
DC voltage
Power
28
GND
DC voltage
Power
29
EAR_HF+
AC Out Voltage
Audio
30
EAR_MT-
AC Out Voltage
Audio
31
EAR_HF-
AC Out Voltage
Audio
32
EAR_MT+
AC Out Voltage
Audio
33
NC
-
Do not connect
34
MIC_HF-
AC In Voltage
Audio
35
MIC_MT+
AC In Voltage
Audio
36
MIC_HF+
AC In Voltage
Audio
37
MIC_MT-
AC In Voltage
Audio
38
GND
DC voltage
Power
39
GND
DC voltage
Power
40
GND
DC voltage
Power
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 17 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
SO104
Pin
Signal
Type
Function
1
VBATT
DC voltage
Power
2
VBATT
DC voltage
Power
3
VBATT
DC voltage
Power
4
VBATT
DC voltage
Power
5
GND
DC voltage
Power
6
GND
DC voltage
Power
7
GND
DC voltage
Power
8
GND
DC voltage
Power
9
NC
-
Do not connect
10
NC
-
Do not connect
11
GND
DC voltage
Power
12
GND
DC voltage
Power
13
GND
DC voltage
Power
14
GND
DC voltage
Power
15
RESERVED
-
16
NC
-
Do not connect
17
RESET*
Digital Signal
Module Reset
18
NC
-
Do not connect
19
NC
-
Do not connect
20
NC
-
Do not connect
21
STAT_LED
Digital Signal
Status Indicator LED
22
NC
-
Do not connect
23
NC
-
Do not connect
24
NC
-
Do not connect
25
GND
DC voltage
Power
26
GND
DC voltage
Power
27
GND
DC voltage
Power
28
GND
DC voltage
Power
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 18 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
The signals related to MAIN UART and AUX_UART on the SO101 and SO104
have a different Logic level from the GE866 because they have been adapted to
the EVK2 levels (2.8V DC).
SO104
Pin
Signal
Type
Function
29
NC
-
Do not connect
30
NC
-
Do not connect
31
SIMIO
Digital Signal
SIM Data I/O
32
SIMCLK
Digital Signal
SIM Clock
33
SIMRST
Digital Signal
SIM Reset
34
SIMVCC
DC voltage
SIM Power
35
SIMIN
Digital Signal
SIM Presence detector
36
NC
-
Do not connect
37
NC
-
Do not connect
38
NC
-
Do not connect
39
GND
DC voltage
Power
40
GND
DC voltage
Power
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 19 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
Antenna Connectors
3.3.4.1 SO103 - MAIN Antenna connector
The GE866 is provided by one single RF antenna. The connector is SO103 and it is a female SMA.
A WCDMA compatible antenna (Refer to the product’s HW user guide) must be connected to SO103.
PL105 - Power Supply Setting
The PL105 connector is permitting to configure how to supply the module.
The Interface is designed to supply and filter the two Module’s inputs VBATT and VBATT_PA and
separately the rest of circuits of the Interface (VBATT_AUX)
The connector is provided by 3 Jumpers (Mounted by default) that permits to:
Select if to supply the module from EVK2 or from an external source
Insert a Power consumption Meter in series to the supply
The connector carries the following signals:
PL105
Pin
Signal
Function
1
VBATT_PA (Module)
Module’s VBATT_PA signal
2
VBATT_PA (EVK2)
VBATT_PA from the EVK2
3
VBATT (Module)
Module’s VBATT signal
4
VBATT (EVK2)
VBATT from the EVK2
5
VBATT_AUX (Interface)
Supply input for the Interface circuits (except
the module)
6
VBATT_AUX (EVK2)
VBATT_AUX from the EVK2 usable to supply
the Interface’s circuit.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

XE866 INTERFACES USER GUIDE 1VV0301260 Rev.2 –2016-09-01 20 of 79
Reproduction forbidden without Telit Communications PLC written authorization –All Rights Reserved
SIM Holder and SIM Detection
The Interface is provided by a SIM Holder (SO102).
The SIM holder lines are in parallel to the lines connected to the SIM Holder on EVK2 so it is not allowed
to have a SIM in both holders.
Due to the fact the product is not provided by a dedicated pin for the HW SIM Presence detection, it is
possible to select one GPIO to be used for this function.
On the interface it has been considered to have the possibility to choose between GPIO 5, 6 or 7 adding
a Jumper on PL301.
On PL301 the lines dedicated to this activity are:
Supposing to define the GPIO_05 as SIM detection (See AT Commands user guide) it is needed to
add a jumper between pin 5 and 6 of PL301.
RESET
The Interface is provided by a button that permits to RESET the module.
Please refer to the Module’s HW user guide for its use and behaviour.
STAT LED
The Interface is provided by a LED controlled by the STAT LED line of the module.
Please refer to the Module’s HW user guide for its use and behaviour.
SIM IN Settings on PL301
Pin
Signal
Function
1
GPIO_07
GPIO_07 on module
2
SIM_IN
SIMIN Line from SIM Holder SO102
3
GPIO_06
GPIO_06 on module
4
SIM_IN
SIMIN Line from SIM Holder SO102
5
GPIO_05
GPIO_05 on module
6
SIM_IN
SIMIN Line from SIM Holder SO102
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.