Tellur TLL331091 User manual

Smart Door/Window Sensor
User Manual
TLL331091

1. PRODUCT REVIEW
This Door/Window Sensor is a Wi-Fi, battery powered reed
sensor, including device part and magnet part. Working with
APP together in your mobile phone, once the state changing
(close or open) detected, the device will wake up the Wi-Fi
connection to Wi-Fi router, send an alarm signal to your mobile
phone via Wi-Fi network, in the case that the APP internet is
available locally or remotely. The alarm is selectable as a
notification on your mobile phone with bar display, banner with
tone, vibration based on the APP Notification setting on your
Mobile Phone. There is an around 5-second delay from the
state changes to notification on your mobile phone depending
on the internet connection quality.
Besides working with APP, this device is compatible with
Amazon Alexa and Google Home.
This device can be installed on Door, Window and Drawer,
which one part is the frame and the other part can be moved.
2. PRODUCT FEATURES
• Working in 802.11 b/g/n 2.4GHz wireless network
(no hub required);
• Wi-Fi network configuration with EZ (Smart Config)
and AP(Access Point) mode;
• Powered by 2xAAA battery for lasting 6 months depending
on alarm frequency;
• Real state (open/close) monitor in APP;
• Notification with Open/Close, Tampered and Low battery
(less than 10%);
• Enable/disable notifications on Open/Close, tampered,
low battery event in APP;
• Indicate the battery level in APP;
• Open/Close history record;
• Share device in family;
• Dual color LED status indicator;
• Mounting with adhesive tape or screw;
• Works with Amazon Alexa, Google Home;

How to Get the device working:
• Make sure your Wi-Fi network work in 802.11 b/g/n
2.4GHz and internet available;
• Download the APP from Apple store or Google Play;
• Register an account in APP and login with your
email address or Mobile phone number;
• Setup the device Wi-Fi connection;
• Mount device on specified location;
• Test and check the Device and APP working state;
• Check working with Alexa and Google Home if necessary;
3. PRODUCT DESCRIPTION
This main device components are showing as following:
1) Latch button: press the Latch button to take apart the
battery cover from the device part in order to change the
batteries or setup the Wi-Fi network.
2) Button: Long press for 5 seconds this button to enter the
Wi-Fi network mode. Switch between EZ mode and AP mode
by long press the button more than 5 seconds.
3) Tamer button: Loose this button will trigger a
tempered Alarm to Mobile Phone;
4) LED indicator: indicate the device working state:
• Fast blinking in Red: EZ mode (Smart config) for
Wi-Fi configuration;
• Slow blinking in Red: AP Mode for Wi-Fi configuration;
Lock button LED Button Tamper button
Device Part
Magnet Part

• Flash once in Blue: Wi-Fi network connected, short press
the temper button or move the magnet from the device part
to flash the Blue;
• Flash once in Dual-Color: No Wi-Fi network connected,
short press the temper button or move the magnet from the
device part to flash the Dual LED.
Note:
1) To check the device is working or not: Press the tamper
button or move the magnet part to close the device, the LED
indicator will flash;
2) To check the device is Wi-Fi connected or not: if the LED
indicator turns purple, the device is not Wi-Fi connected. If
the LED indicator turns blue, the device is Wi-Fi connected.
4. PRODUCT SPECIFICATIONS
• Power supply: 2 x AAA battery, 3V
• Battery life: Up to 6 months
• Open/Close notifications: Yes
• Tamper notifications: Yes
• Low battery notifications: Yes
• History record: Yes
• WiFi standard: IEEE 802.11b/g/n
• Supported WiFi network: 2.4GHz
• Dimensions: 7.5cm x 4cm x 1.8cm
• Weight: 65 gr

6. ADD AND REMOVE DEVICE IN YOUR APP ACCOUNT
6.1 Launch the APP and login, Click ADD DEVICES -> All -> Door to
start the device adding.
Set up router
This device only supports 2.4GHz frequency band router, does
not support 5GHz frequency band router, please set the
relevant parameters of the router before WiFi configuration,
WiFi passwords do not include special characters such as
~!@#$%^&*(). When the device is configured in WiFi, the
mobile phone and device are as close as to the router, which
can speed up the configuration
of the device.
5. INSTALL APP AND REGISTER AN ACCOUNT
Download the Tellur Smart App for both iOS and Android OS.
Scan the QR code to download Tellur Smart App
Android
IOS
·Support
Download App(IOS&android)

6.2 Press the device button for 5 seconds to enter the Wi-Fi
conguration state (fast blinking in EZ mode or slow blinking in AP
mode).
6.3 Input the Wi-Fi SSID and password of the Wi-Fi network that
the device is going to work with, then waiting around 30 seconds
for the Wi-Fi conguration nished until a device is successfully
added;
6.4 Change the device name and share it within APP account as
you want.
6.5 Click the device just added to launch the device state UI to
check the state, battery level, record history and the APP
notication setting.

Note:
*Make sure the device and APP work in same Wi-Fi
configuration mode, both in EZ mode or in AP mode. Refer to
Section 3 product description LED indicator part to check which
state the device is working with.
*In some case that the EZ mode is not working Wi-Fi network,
AP mode is the only option.
• EZ mode: make sure your APP is internet available and device
and APP both work in EZ mode. Then input the Wi-Fi network
password to finish the device adding. If you want to change the
Wi-Fi network, please check the “Change network” in APP;
• AP mode: Click AP Mode, make sure your APP is internet
available and device and APP both work in AP mode. Confirm to
input the SSID and Password of Wi-Fi network, then select the
Device AP name with Tellur Smart App in Wi-Fi list then back to
App to finish the device adding.

After the device is successfully added to APP account, the LED
will turn off. Using the methods mentioned in LED indicator to
check the device is successfully added or not. If not, please
repeat the Device adding again.
6.6 Remove device
1) Click “Remove Device” to remove this device from your
account; click “Restore manufacturer Defaults” to remove the
device from your account and clear the history record in cloud.
2) After remove device or Restore manufacturer defaults from
the APP, repeating the Device add steps to your account;

7. PRODUCT INSTALLATION AND CHECK THE WORKING
STATE
7.1 The device part and the magnet part needs to be installed
within 10MM when the door/window is closed.
NOTE:
1. This Sensor should not be mounted directly on or near
metal framing or other large metallic objects since metal
objects may weaken the radio signal strength.
2. This Sensor should only be placed indoor and away from
water and other extreme weather conditions.
7.2 Using one of the following methods to mount the device to
the wall, door or window:
• 3M Tap Mode
1) Stick the included self-adhesive pads to the bottom of the
device and magnet.
2) Peel off the protective layer of the sticker.
3) Stick the device onto the door/window frame.
4) Stick the magnet onto the moving part of the door/window,
no further than 10mm from the sensor

NOTE:
1. Wipe clean the surface where the Door Window Sensor will
be mounted.
2. Any dust and particles can reduce the adhesion of
double-sided mounting tape.
• Screw Mode
1) Take the battery cover apart from the device part by
pressing and holding the latch button and the holder of the
magnet part;
2) Screw the battery cover on to the door or window frame;
3) Keep the orientation marks of the device part and the
magnet are oriented towards each other;
4) Screw the magnet holder to the moving part of the door or
window;
5) Mount the device part on to battery cover;
6) Mount the magnet part to the holder.
7.3 Change the battery and change the Wi-Fi network
In the case of the battery is over or the Wi-Fi network is
changed (SSID or password is changed), take down the device
part, to replace the battery or config the Wi-Fi network again;
1) Press and hold the Latch button to take apart the device
part. Leave battery cover tapped on screw on the frame;
2) Change the batteries;
3) Or follow the Device add procedures;

4) Mount the device part back to the battery cover;
7.4 Test and check the device working state
1) Simply to open/close the moving part from the frame, that is
to take the magnet part apart from device part, if the LED is
flashing once in blue and state in APP changes between open
and close.
2) Take down device part from the battery cover, the LED is
flashing once in blue and APP will receive a Tampered alarm.
8. Alexa integration:
1. Go to Home menu on Alexa app.
2. Select "Skills" / "Skills & Games".

3.3. Type Tellur Smart in the search bar.
4. Select Tellur Smart and click
"Enable" to activate Tellur Smart.
5. Then you need to input your
account and password that you
registered in Tellur Smart .
Now you finish the Alexa Link.
6. Your (Brightfun) App has been
skilled with Alexa, and now you
can control any device added to
your Tellur Smart App,
remember that if you rename the
device you added, it must be a
simple name that Alexa can
recognize.
7. Control your smart devices
through Alexa

Now you can control your smart
devices through Alexa. Take
bedroom light as the example, the
supported voice commands are as
below:
“Alexa, turn off bedroom light”
“Alexa, turn on bedroom light”
“Alexa, dim bedroom light”
“Alexa, set bedroom light to red”
Failed to add device?
1. Make sure the device is powered on.
2. Check the WiFi connection of your phone.
3. Check if the device is in pairing mode.
Reset your smart device to enter pairing mode.
Please refer to the "How to reset device" section
below.
4. Check router or related:
5.
If you use a dual-band router, select the 2.4GHz
network to add the device. You also need to enable
the router's broadcasting function. Set encryption
method as WPA2-PSK and authorization type as
AES, or set both on "auto".
Check if the WiFi signal is strong enough.
To maintain the signal strong, keep your router
and the smart device as close as possible.
6. Wireless mode should be 802.11.b/g/n
7. Make sure you don't exceed the maximum number
of registered devices supported by the app (150).
8.
9.
Check if the router's MAC filtering function is
enabled. If so, remove the device from the filter list
and make sure the router is not prohibiting the
device connection.
Make sure the WiFi password entered in the app is
correct.

EZ and AP connection modes:
Smart devices can be connected using two modes: EZ
and AP.
EZ represents the easiest way of connecting and
enabling a smart device. You will need to have the
device, active wireless network through with login
password and Tellur Smart APP installed on a
smartphone / tablet.
AP mode can be used to configure and enable a smart
device first with the smartphone / tablet and later on
to the Wi-Fi network.
How to reset device?
1.
2.
Reset procedure for devices with reset button
(power strip, aroma diffuser, plugs etc.) -> Long
press the reset button for 5 seconds until the LED
indicator flashes, indicating successful reset.
If the LED indicator flashes quickly (2 times per
second), the device has entered EZ pairing mode. If
the indicator flashes slowly (one time /3 seconds),
the device has entered AP pairing mode. Under EZ
mode, press the reset button for 5 seconds until
the LED flashes slowly, indicating the AP mode
(and vice versa).
Reset procedure for lighting devices -> Start by
turning off the lights. Switch light following these
exact steps: on-off-on-off-on (the time interval
between switches should not exceed 10 seconds).
When the lights are flashing, the device has been
successfully reseted. If the light isn't flashing,
repeat the steps above.
When the lights flash quickly (4 times/second), the
device is in EZ mode. If the lights flash slowly (2
times/3 seconds), the device is in AP mode. Under
EZ mode, repeat the steps above until the light
starts flashing slowly, indicating that the device
has entered AP mode (and vice versa).

How to add device under EZ mode?
1. Make sure the LED indicator/light flashes quickly.
2. Make sure the phone is connected to WiFi.
3. Tap "Add device" in Tellur Smart app and enter the
WiFi's network password.
4. In the device list, select the device you want to pair
and add it.
How to add device under AP mode?
1. Make sure the LED indicator/light flashes slowly.
2. Tap "Add device" in Tellur Smart app and select "AP
mode" from the top-right corner. Connect to the
device's hotspot first and then proceed to connect it
to the WiFi network.
3. Tap "Next" to add device.
Can I control device with 2G/3G/4G network?
When adding the device for the first time, the device
and the phone need to be connected to the same WiFi
network. Once the device has been successfully
paired with Tellur Smart app, you can remotely
control it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device
sharing" -> "Sharing sent", tap "Add sharing" and
share the device with the added family members.
Notice - users have to install the Tellur Smart app on
their device in order to see shared devices.
How can I manage the devices shared by others?
Open the app, go to "Profile" > "Device sharing" >
"Sharing received" where you can see the devices
shared with other. Swipe left to delete shared devices.

9. Quick Guide of Using Google Home to Control Smart
Devices
Before using Google Home to control your devices,
make sure you meet the following conditions:
You have a Google Home device or an Android device
with Google Assistant.
You have the newest version of Google Home app. You
have the newest version of Google app (Android only).
The device display language is set to English US. You
have the Tellur Smart app and a related account. Add
devices in Tellur Smart App (Refer to App
Instruction)
You can skip this part if you've already add
some devices to your Tellur Smart account, and
in the meantime the devices'name are easily
recognized.
Link account in Home Control
1.Go to Google Home's homepage and tap "+".

2. Hit the "Add new" button, enter Tellur Smart in the
search bar and select the app from the list. Next,
select your Tellur Smart account's region, enter your
Tellur Smart account and password and tap "Link
now". After you assign rooms for devices, your
devices will be listed in the Home Control page.
Now you can control your smart devices through
Google Home. Take bedroom light as the example, the
supported voice commands are as below:
• Ok Google, turn on/off bedroom light.
• Ok Google, set bedroom light to 50 percent.
• Ok Google, brighten bedroom light.
• Ok Google, dim bedroom light.
• Ok Google, set bedroom light to red.

Declaration of conformity
We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest, Sector
1, Marinarilor street, nr. 31, we declare on own responsibility
that the product below:
Product description: WiFi Smart Door&Window sensor
Brand: Tellur
Product code: TLL331091
It does not endanger life, health, work safety, does not have a
negative impact on the environment and
corresponds to the standards stated in the manufacturer's
declaration of conformity.
The product is in compliance with the following standards and
/ or other normative documents:
RED – 2014/53/EU
Applied standards:
EMC: ETSI EN 301 489-1 V2.2.0 (2017-03)
ETSI EN 301 489-17 V3.2.0 (2017-03)
Radio: ETSI EN 300 328 V2.1.1 (2016-11)
Health: EN 62479:2010
Safety: EN
60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
RoHS – 2011/65/EU (RoHS 2.0)
The product bears CE mark, applied in 2019
Name: George Barbu
Function: General manager
Place and date: Bucharest, 19-03-2019
Signed:

Disposal and recycling information
The crossed-out wheeled-bin symbol on your
product, battery, literature or packaging reminds
you that all electronic products and batteries must
be taken to separate waste collection points at the
end of their working lives; they must not be disposed
of in the normal waste stream with household
garbage. It is the responsibility of the user to dispose
of the equipment using a designated collection point
or service for separate recycling of waste electrical
and electronic equipment (WEEE) and batteries
according to local laws. Proper collection and
recycling of your equipment helps ensure EEE waste
is recycled in a manner that conserves valuable
materials and protects human health and the
environment, improper handling, accidental
breakage, damage, and/or improper recycling at the
end of its life may be harmful for health and
environment.