Teltonika FMB225 User manual

https://wiki.teltonika-gps.com/view/FMB225_Testing_RS-232_and_RS-485_TCP_link_mode
FMB225 Testing RS-232 and RS-485 TCP link
mode
FMB225 Manual > FMB225 Testing RS-232 and RS-485 TCP link mode
Contents
1 Step 1. Understanding what is FMB225 RS232/RS485 TCP Link mode
2 Step 2. Setting parameters in configurator for TCP Ascii mode test
2.1 2.1. Message Timestamp
3 Step 3. Establishing FMB225 test link with server through Hercules
4 Step 4. Sending from server to external device over Hercules
5 Step 5. Sending from external device to server over Terminal
5.1 Links for download
Step 1. Understanding what is FMB225 RS232/RS485 TCP
Link mode
In this mode link with external device (for example PC) using text messages can be established.
FMB225 has to be connected to the external device through RS232 or RS485. Any string of data
coming to RS232 or RS485 will be routed to server (if link is currently active). Messages that are
exchanged between FMB device and server, have to be packed in Codec.12 format. Here for TCP
link establishment we will be using Hercules. For sending messages from external device to server
over FMB225 Terminal will be used.
Step 2. Setting parameters in configurator for TCP Ascii
mode test
First of all, in the FMB225 configurator you have to set parameters for RS232 or RS485 (depends on
which RS232 or RS485 port you are using) in global parameters window.

Here in RS232 settings section Baudrate can be chosen to any available. Mode has to be chosen to
TCP Ascii.
2.1. Message Timestamp
Message Timestamp parameter is used to determine if it is necessary to include timestamp in RS232
TCP packet when sending to server. If parameter is Enabled, then Codec 13 is used for data sending.
Otherwise, Codec 12 is used.
You can also use RS485 which is also suitable for Ascii TCP Link mode. In order to make a link
between FMB225 device and server, Domain and Target Server Port have to be set in the working
device profile, GPRS data sending Settings section. When right parameters are set, you can save the
configuration to FMB225 device.
Step 3. Establishing FMB225 test link with server through

Hercules
In this case we have a PC that is considered to be a server and an external device at the same time.
When FMB225 is configured and connected to the external device, next what we have to do is to
start Hercules (Figure 2) which is in server side and will be used for sending/receiving messages.
(Please keep in mind that external device RX cable needs to be connected to FMB225 device TX
cable and external device TX cable connected to FMB225 RX cable.)
Here you have to choose TCP Server section from the upper menu. In the marked fields:
1. Write your server (PC) port and press Listen button;
2. In the Client connection status you will be able to see if a connection between server and FMB
device has started successfully;
3. In the Send field you can write a message that is packed in Codec.12 format which will be sent to
FMB225 device.
Step 4. Sending from server to external device over Hercules
When sending a message from Hercules, first you have to pack it in Codec.12 format. If you want to
send a message to external device over FMB225 from server, a packed message should be pasted
into the Send field in Hercules (Figure 2, marked field 3). The HEX format box should be unchecked
if the text is in HEX format (for example:
00000000000000260C01050000001e48656c6c6f2c206c657473207465737420544350206c696e6b20
6d6f64650100001aef etc.). When you press Send button, you will see your message in the Sent data
field (Terminal). If the message is sent successfully to FMB225, you can check it in the Terminal
window.
Connect Port ½ cable one end to RS232 RX/TX cables on FMB225 device and then connect USB side
to computer. Please find which port is used for Port ½ cable in device manager. Please select correct
COM Port (1). In this case we use COM21. Then press connect (2).
Open Hercules application and just type your message in the marked field (3) and press Send button
(4). If sent successfully, you will see it in Hercules Sent data field (Figure 4). For example test text
will be sent: Hello, lets test TCP link mode. In Codec.12 format it looks:
00000000000000260C01050000001e48656c6c6f2c206c657473207465737420544350206c696e6b20
6d6f64650100001aef

On terminal you should now receive message:
Step 5. Sending from external device to server over Terminal
For testing data sending from external device to server, enter text you want to send on Terminal and
press send.
You can check if data is received to server in Hercules. Sample text: Hello, lets test TCP link mode.
Please keep in mind, that special chars (ASCII Names) needs to be marked.
Links for download
1. Hercules SETUP utility
2. Terminal download