TERMA Alex ONE User manual

Installaon guide Alex ONE 1140x500mm - E8
Please read the instrucons in full before starng to fit your radiator.
• Please check that all parts listed are present before starng installa-
on.
•Valves are not provided, please make sure that you have them
before you start. This product requires standard 1/2" radiator valves.
• Before drilling holes for the brackets please check that there are no
hidden wires or pipes.
• The plugs supplied are for hard walls masonry only. Please make
sure you are using the correct plug for your wall.
• Terma radiators are designed for closed heang systems.
• The radiator should be fied at least 100 mm from the floor to
maximise heat efficiency.
• Nong the distances between bracket centres, mark out the
posion of the brackets on the wall.
• Drill holes to approximately 80 mm depth using a 10 mm drill bit
and insert rawl plugs (1). Using connecng screw with a washer (2)
aach mounng bracket-1 (3).
• Guide radiator brackets into mounng brackets - 1(3) and fix with
connecng screws (4)
• Connect the water flow using appropriate 1/2" BSP valves. Follow
valves manufacture guidelines for correct installaon.
• Fill the radiator and purge any trapped air via the bleed valve at the
top of the radiator.
• Wipe your radiator down using a clean damp cloth.
Never use scourers or abrasives.
For all installaon and warranty enquiries please
contact Crimson Bear Customer Support on
01535 636256

22
30
30
E8
1140
500
70
130
1000
14
470
ON/OFF
Refers to water and dual fuel version
Fixing kit content
rawl plug
wall fixing
screw +
washer
mounng
bracket-1
bracket to
collector
fixing screw
air vent
allen key
(1)
(2)
(3)
(4)
All manuals and user guides at all-guides.com
all-guides.com

Mounng bracket TERMA P4, P/S, 40 mm, 3x
10x80
gigieltom20170817 *Refers to water and dual fuel version only
3x
21 3 4
5
3x
6*
1x
14
22
4
a b c d
7*
PZ3
PZ1
3x
3x
D
E
F
B
A
230V
Jw
#8 4
A
B
F
E
D
230V
Ix
All manuals and user guides at all-guides.com