TESmart HKS1601A10 User manual

www.tesmart.com
1
16x1 HDMI KVM Switch
# HKS1601A10
This 16x1 HDMI KVM switch provides you with great flexibility in integrating cross-platform
computer equipment easily. It makes you available to switch easily and reliably between any
HDMI computers using one HDMI compliant display.
The 16x1 HDMI KVM switch supports USB 2.0 hub and USB 2.0 keyboard /mouse. By using
USB 2.0 hub ports on the KVM, you even can attach USB drive, printer, barcode scanner or
other USB devices to the KVM. Switching can be controlled through variable methods, such
as the front panel source selector buttons, RS232 commands, IP commands, IR signals and
hot keys on keyboard.
With EDID emulators in every input ports, keep PCs always have correct display information,
prevent display settings changed while switching input ports.
Features
Using one USB console controls 16 HDMI computers
Support Unix /Windows /Debian /Ubuntu /Fedora /Mac OS X /Raspbian /Ubuntu for
Raspberry Pi and other Linux based systems
With EDID emulators in each input port, keep PCs always having correct display
information
Support hot plug, connect or disconnect devices to the KVM switch in any time and
without turn off devices
Support auto switching to monitor computers in a specified time interval
Support front panel buttons, IR signals, keyboard hot keys, RS232 serial commands or
IP commands to control KVM switch
Available to use keyboard without any delay after switch input sources
Support resolution up to 3840*2160@30Hz
With extra standard USB 2.0 hub port, it is possible to connect barcode scanner, USB
hard drive or other USB devices to KVM just as you have plug these devices directly to
computer
Support DVI-D single link sources and displays with the use of HDMI-to-DVI adapters
Packing list
1 * 16x1 HDMI KVM Switch
1 * DC 12V 2A Power Adapter
1 * IR Remote Control
1 * IR Receiver Cable
1 * 3 Pins Connector (For RS232)
2 * Rack-ears
1 * Quick-Start Guide

www.tesmart.com
2
Panel descriptions
ID
Name
Description
1
IR in
Connect IR receiver extension cable to this port, then it is able
to use IR control even the KV switch is installed in a rack
2
DC 12V
12V DC power supply
3
RS 232
Connect this port to any control termination, then it is able to
select the input sources by sending RS232 commands
4
USB2.0 port
For USB2.0 devices, for example printers, USB hard disk,
barcode scanner, touch pad,etc
5
HDMI output
Connect to HDMI display
6
Keyboard
and mouse
input
For USB keyboard and mouse input, including wireless
keyboard and mouse
7
HDMI input
Connect to HDMI sources
8
USB data
Connect to computer by USB Type A to Type B cable
9
Auto scan
time interval
settings
[MIN]: Press [MIN] to loop between 0~59 minutes
[SEC]: Press [SEC] to loop between 0~59 seconds
[Set]: After setting minutes and seconds, press button [Set] to
enter final scan time interval setting
10
Status LED
Red: Turn off auto scanning mode
Green: Turn on auto scanning mode
11
IR receiver
Receive IR signal
12
LED display
Display current selected input port

www.tesmart.com
3
13
Keypad
[1~9]: Press these buttons to directly select input 1~9 sour
ces.
[0/Close]: Press this button directly will turn on or turn off t
he display out; Press [1+] then [0/Close] to select input 10
[Scan]: Press this button to start or stop automatically scan
between input 1 to input 8. The interval time can be set by
buttons [Set], [MIN], [SEC] as described above
14
LAN port
By connecting to the LAN through this port, you can use the
terminal device in the same LAN to send TCP/IP commands to
control the switching of input port
15
Power switch
Turn on or off power supply

www.tesmart.com
4
Connection diagram

www.tesmart.com
5
Specification
HKS1601A10
16x1 HDMI KVM Switch
Functionality:
Auto Scan
Yes
Port selection
Front panel buttons
Yes
Keyboard hotkeys
Yes
IR remote control
Yes
Console commands
RS232 / IP
Technical:
Max. Resolution
3840x2160@30Hz
Auto to get EDID
Yes
Data rate
10.2 Gbps
Auto scan interval
5~3600 Seconds
Beep Sound
On/Off
OSD
No
Supported OS
Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/
Raspbian /Ubuntu for Raspberry Pi and other Linux
based systems
Console ports
Keyboard emulation
1 * USB Type A
Mouse emulation
1 * USB Type A
USB 2.0 Hub ports
2 * USB Type A
Video /Audio
1 * HDMI Type A
RS232
3 Pins jack
LAN (TCP/IP)
1 * RJ45
IR extension input
1 * AUX
System ports
USB Data
16 * USB Type B
Video / Audio
16 * HDMI Type A
ESD protection
Human body model - ±8kV (Air-gap discharge)
Mechanical:
Chasing material
Metal
Product
Dimension
440 (L) x 150 (W) x 44.5 (H) mm
Weight
1856g
Item
Dimension
488 (L) x 123 (W) x 186 (H) mm
Weight
3453g
Carton
Dimension
505 (L) x 280 (W) x 395 (H) mm
Quantity
4pcs
Total Weight
14.562kg