TESmart HDK0402A1U User manual

USER MANUAL
Dual Monitor KVM
ENJOY THE VIVID WORLD
HDMIDP

1
HDMIDP
Features :
Using only 1 set of keyboard, mouse and 2 monitors to control 2
computers
Support Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/
Raspbian/Ubuntu for Raspberry Pi and other Linux based
systems
Support hot plug, connect or disconnect devices to the KVM
at any time without turning off PC
Support keyboard hotkeys, front-panel keys and IR remote
control to control the KVM
Available to use keyboard and mouse without any delay after
switching PC
Support resolution up to 3840*2160@60Hz
With extra standard USB port, it is possible to connect bar code
scanner, USB hard drive or other USB devices
Support keyboard and mouse pass through mode to improve KM
compatibility
1 * 4X2 Dual Monitor KVM
1 * DC 12V adapter
1 * IR remote control
1 * User manual
Packing List :

2
HDMIDP
Panel Description :
ID
Name
Description
1
USB connection
status
LEDs will be lit if the USB TypeB ports
connect to computers, and computers are on
2
Input selection
status
Indicate current active selected input source
LED1 on: Both monitors display PC1
LED2 is on: Both monitors display PC2
LED1&LED2 on: One monitor display one PC
3
Input selection
button
Switch inputs between 2PCs
4
IR receiver
Receive IR remote signal
5
Power switch
Turn on or turn off power supply
6
DC 12V
12V DC power supply
1345
2
11
6 7 8 9 10 12

3
HDMIDP
ID
Name
Description
7
L/R audio output
Analog audio output, connect to
speaker
8
HDMI output
Connect to HDMI display
9
Keyboard and mouse
input
Connect to keyboard and mouse
10
Standard USB 2.0 port
Connect to USB 2.0 devices, printers,
USB drives
11
PC 2 Input
HDMI: Connect to HDMI output of
PC2
DP: Connect to DP output of PC2
USB: Connect to USB of the PC2(with
Type A to Type B cable)
12
PC 1 Input
HDMI: Connect to HDMI output of
PC1
DP: Connect to DP output of PC1
USB:Connect to USB of the PC1(with
Type A to Type B cable)

4
HDMIDP
LED1 on: Both monitors display PC1
LED1&LED2 on: One monitor display one PC
LED2 on: Both monitors display PC2
Connection Diagram :
HDMI cable DP cable USB type-A to
type-B cable
Display Mode:
Display mode 1:
Display mode 2:
Step1:Connect the two outputs of the PC1 to the Input A and
Input B of the KVM PC1 inputs.
Connect the USB of the PC to the USB of the KVM PC1
inputs with USB type A to B cable
Note: Both Input A and Input B should be connected to the same
computer. If connect only one of them, then the dual monitor
function would not work properly.

5
HDMIDP
Step 3: Connect speaker and monitor to the KVM.
Keyboard Mouse
Barcode
Scanner
USB
drive Printer
Monitor 2
Speaker
Monitor 1
HDMI cable
How To Use :
1. Set up the connection according to the connection diagram.
2. After all the PCs are started in step 1, then you can control the
Dual Monitor KVM by keyboard hot keys, IR control or the front-
panel key ‘SW’, the specific control methods are as follows:
Step 4: Turn on the power switch to start the Dual Monitor KVM.
Step 2: Connect keyboard, mouse or wireless dongle of the
keyboard and mouse to the specified ports.

6
HDMIDP
How to use keyboard hot keys :
+
Right
-Alt
Right
-Alt
Enable or disable buzzer sound
+
Scroll
Lock
Scroll
Lock
+F11
Turn on or off keyboard and mouse
pass through mode
+
Scroll
Lock
Scroll
Lock
+F2
Note: For the best compatiblity, it is better to turn on keyboard and
mouse pass through mode. In this mode, the keyboard and mouse are
dynamically mapped to computer, so you are able to use special
keyboard and mouse that with multimedia keys or other customized
keys.
Scroll
Lock
1
Scroll
Lock
+
+Select input source 1 in display mode 1
+
Scroll
Lock
Scroll
Lock
+2Select input source 2 in display mode 1
+
Scroll
Lock
Scroll
Lock
+3
Keyboard and mouse focus on the
desktop of input source 1 in display
mode 2
+
Scroll
Lock
Scroll
Lock
+4
Keyboard and mouse focus on the
desktop of input source 2 in display
mode 2
Press [Right-Alt] key twice to change
active selected computer in display mode 2

7
HDMIDP
F1
+ +
Right
-Ctrl
Right
-Ctrl
Switch the control hotkey
to [ScrollLock]
F1
+ + Switch the control hotkey
to [Right-Ctrl]
If no [ScrollLock] key on your keyboard or the [ScrollLock] key
is used for other functionality, you can take [Right-Ctrl] hotkey
instead of [ScrollLock] key by below way:
Execute hotkey command [ScrollLock]+[ScrollLock]+[F1].
HOW TO CHANGE THE HOT KEYS COMBINATION:
Turn on the KVM, press [Scroll Lock] + [Scroll Lock] + [F3]，if
buzzer beeping twice, the KVM is in keyboard and mouse pass
through mode. And beeping once means in keyboard and
mouse emulation mode.
How to identify whether the KVM is in keyboard and
mouse pass through mode?
The same if you want to change the hotkey from [Right-Ctrl] to
[ScrollLock], you could do as follows:
Execute hotkey command: [Right-Ctrl]+[Right-Ctrl]+[F1].
After you had done as above , the hotkey combinations would be
changed to: [Right-Ctrl]+[Right-Ctrl]+[xxx].
Note: xxx refers to keyboard key 1~4, F11, F2, F3.

8
HDMIDP
IR Remote Control :
M P
1 2
34
Remote Control
Note: 1.For the safety request by some express company, the remote
control is not equipped battery by default. Please install the
button battery CR2025 before using it.
2. Unspecified buttons at above are non-functional.
Key
Display mode 1
Display mode 2
Cyclically select
PC1 and PC2
Switch to Display mode 1
Switch to Display
mode 2
Swap the desktops of
two monitors
Switch to PC 1
Keyboard and mouse
focus on the desktop of
PC 1
Switch to PC 2
Keyboard and mouse
focus on the desktop of
PC 2
M
P
1
2

9
HDMIDP
Mouse
Model
Keyboard
Model
Logitech
G500S
Logitech
G105
Microsoft Wireless
Mouse
2000
Microsoft Wireless
Mouse
2000
Hewlett-Packard
M100
Dareu
CK535
Zklli
ZM500-5
ME TOO
Z5
FL.SPORTS
G12
Aigo
8362
Aigo
WQ-641
AJAZZ
AK35I
LDK.al
Colourful X800
Acer
KB21-2X
Note: The above list is part of the verified keyboards and
mouses list with special HID protocol.
Verified keyboards and mouses:

V002
Warranty Information :