TESmart HKS0201A30 User manual

1
HDMI KVM

HDMI KVM
2
ID
Name
Description
1
DC 12V
12V DC power supply
2
HDMI output
Connect to HDM I display
3
Standard USB 2.0 port
Connect to USB 2.0 devices,
printers, US B drives
4
Keyboard and mouse
input
Connect to keyboard and mouse
5
HDMI input
Connect to HDM I source devices
6
USB data ports
Connect to USB ports of PC

3
HDMI KVM
Panel Description :
ID
Name
Description
7
Power switch
Turn on or turn off power supply
8
USB connection
status
LEDs will be lit if the USB Type B
ports connect to computers, and
computers are on
9
Input selection status
Indicate current selected input
source
10
Input selection
button
Select input source
11
IR receiver
Receive I R remote signal
12
Output resolution
selection status
LED on: 4K resolution
LED off: 1080P resolution

4
HDMI KVM
Connection Diagram :
PC 2 PC 1
HDMI cable
USB Type-A to
Type-B cable
Barcode
Scaner USB
Drive Printer
Keyboard Mouse
Monitor
HDMI cable

5
HDMI KVM
Display Mode :
PC 1
In full screen mode, one of the two input sources is displayed
in full screen and best resolution.
• Press the hotkey command "ScrollLOCK+ScrollLOCK+F10"
to enter PIP mode.
• In PIP mode, one input source is displayed in full screen, the
other input source is displayed as a thumbnail in the upper
right corner of the screen, occupying 1/9 of the screen.
• Available to exchange the two windows via front panel button
"Select" or remote control.
2. Picture-in-picture（PIP）mode
PC 1
PC 2
1.Full screen mode
Note: The windows without input signal remains black.
PC 1
PC 2

6
HDMI KVM
HOW TO USE :
HOW TO USE KEYBOARD HOT KEYS:
1. Hit ScrollLock key twice within 2 seconds, the buzzer will beep
twice.
2. After step 1 enter following hot key commands within 3 seconds,
the KVM will execute the corresponding commands.
1.Setup the connection according to the connection diagram.
2.After all the PCs are started in step 1, then you can switch to any
PC by keyboard hot keys, IR keys or the key pad on the KVM
front panel. (For example, if you want to control the PC connected
to HDMI IN 2 just press the "Select" button on front panel, or
press digit button "2" on remote control, or the keyboard hotkey
commands described following)
Select next input port
+ +
2
+Select port by port number +
Select previous input port
++

7
HDMI KVM
Enable or disable buzzer sound
F11
+ +
Turn on auto switching mode
Note: Default auto switching time interval is 6 seconds, you are
able to change this value by following hot key commands:
+ +
Increase or decrease auto
switching time interval
Note: 1 second per step, the time is up to 250 seconds.
++
Esc Turn off auto switching mode
Enable or disable fast
switching mode
F12
++
Note: If fast switching mode is enabled, then double hit left or
right bound of the screen with mouse pointer in 1 second,
KVM will switch to previous or next PC.
Select 4K EDID or 1080P EDID
++

8
HDMI KVM
Known issue: Apple keyboard is not supported.
Turn on or off P I P mode
F10
IR Remote Control:
1In full screen mode, select input 1
In PIP mode, switch input source 1
as the main screen display
2In full screen mode, select input 2
In PIP mode, switch input source 2
as the main screen display
MSelect 4K or 1080P mode
PTurn on/off P I P mode
+ +
Note:1. For the safety request by some express company, the remote control
is not equipped battery by default.
2. Unspecified buttons at above are non-functional.

We warrant this product as free of defects in material and
workmanship for a period of one (1) year from the date of
shipment.
If during the period of warranty this product proves defective
under normal use, we will repair or replace this product,
provided that this product has not been subjected to
mechanical, electrical, or other abuse or modifications. If it
fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the
time of repair. Such repairs are warranted for six (6) months
from the day of reshipment to the buyer.
31.00.0187-V003