Test Equipment Depot GPL-5010 User manual

Transient Limiter
GPL-5010
USER MANUAL
GW INSTEK PART NO.
ISO-9001 CERTIFIED MANUFACTURER
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

This manual contains proprietary information, which is protected by
copyright. All rights are reserved. No part of this manual may be
photocopied, reproduced or translated to another language without
prior written consent of Good Will company.
The information in this manual was correct at the time of printing.
However, Good Will continues to improve products and reserves the
rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan

Table of Contents
1
Table of Contents
OVERVIEW ........................................................................ 2
PACKAGE CONTENTS ....................................................... 3
APPLICATION ................................................................... 4
SCHEMATIC DIAGRAM ..................................................... 5
APPEARANCE.................................................................... 6
APPENDIX ........................................................................ 7
GPL-5010 Specifications ........................7

GPL-5010 User Manual
2
OVERVIEW
GWINSTEK GPL-5010 transient limiter is
commonly used to test electromagnetic
interference. For EMI testing, when accidentally
overloaded, it can protect the terminal circuit and
the valuable EMI test equipment. Meanwhile,
together with our GLN-5040A Two Line V-
Network, they constitute a complete EMI test
system.

PACKAGE CONTENTS
3
PACKAGE CONTENTS
Item
Quantity
Limiter main unit
1 Pcs
User instruction manual and warranty card
1 Book
Test report
1 Sheet

GPL-5010 User Manual
4
APPLICATION
It can be used in Power supply (switch type and
linear) design.
It can be used in Inverter/transformer design.
It can be used in LED illumination design.

SCHEMATIC DIAGRAM
5
SCHEMATIC DIAGRAM
GPL-5010
EMC Receiver LISN EUT
Transient
Limiter
Mains power DUT
GSP
L

GPL-5010 User Manual
6
APPEARANCE
Output Interface: N male
Input Interface: BNC female

APPENDIX
7
APPENDIX
GPL-5010 Specifications
Bandwidth
9kHz-200MHz
Limit level
50mW(+17dBm)
System impedance
50Ω
Connectors
Input
Input : BNC (female)
Output
Output : N (male)
Maximum input level
Continuous: 2.5W(+34dBm)
Pulse: 10kW(10uS)
DC: ±12V
Insertion loss
<2kHz
>30dB
9kHz-50MHz
10dB±0.5dB
50MHz-200MHz
10dB+2.2dB/
10dB-0.5dB
<6kHz, >400MHz
>13dB
Frequency response curve
Figure 1(25°C )
Amplitude limiting
specification curve
Figure 2(25°C )
Operating temperature
0°C -55°C
Storage temperature
-40°C -80°C
Dimensions
118mm(L)x44mm(W)x23mm(H)
Weight
Approx. 92g
Certification
CE(EN61010-1:2010
EN61326-1:2013
EN61000-3-2:2014
EN61000-3-3:2013)

GPL-5010 User Manual
8
Figure 1
Frequency
Response Curve
Figure 2
Amplitude
Limiting
Specification
Curve
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com