9
Setup
Setting Up a New Raumfeld
System
You can operate the Raumfeld One in a
system with or without the Raumfeld Base.
If you have a Raumfeld Base, please con-
sult the Base’s setup guide. For setup wi-
thout the Raumfeld Base, please follow the
instructions below.
1. If you wish to set up your system with
the Raumfeld App on your smart-
phone, the device must be connected
via a network cable to your network
router for the duration of the setup.
Your smartphone must be wirelessly
connected to the same network.
ĕ This step is not necessary when
setting up the device with a Raumfeld
Controller.
2. Pick up your Raumfeld Controller
or start the Raumfeld App on your
smartphone.
ĕ After a few seconds, the setup as-
sistant will activate and guide you
through the remaining setup proce-
dure.
3. In order to connect your Raumfeld
One with your wireless access point,
select „Connect to Your Personal Net-
work“ in the setup wizard at the
„Connect to Network“ step. Simply
select your wireless network and then
enter the corresponding password.
4. Follow the on-screen instructions
to configure the device and to as-
sign it a room name.
5. If you wish to add more playback
devices to your Raumfeld system,
select „Connect More Rooms“
and follow the on-screen instruc-
tions.
ĕPlease note that the network
cable of the first device may be
only removed after the comple-
tion of the entire setup process.
6. Music shared locally in your net-
work can be made available to
your Raumfeld System by ad-
ding it as a music resource via
your Controller or the Raumfeld
App under „Settings> Music Re-
sources“.
You may also attach a USB stick
or a USB HDD with an indepen-
dent power supply to the Raum-
feld One. The music will then be
available without further configu-
ration in your Raumfeld System.
