Tevion MD 4414 User manual

2
SAFETY INSTRUCTIONS
Do not let children use electrical devices unattended.
Swallowing batteries may be fatal. Always keep the unit
and batteries out of reach of young children. If a battery
has been swallowed, consult a doctor immediately.
Also, keep the plastic packaging out of reach of children
to avoid danger of suffocation.
Setting the product up safely
Choose a flat, firm surface to set the product on. Make
sure that
the ventilation slots are not covered (ensure some
distance from any walls)
no foreign bodies or fluids get into the unit (e.g., do
not place vases on the unit)
the unit does not come into contact with dripping
water, splash water or humidity,
the unit is not exposed to sunlight or other direct
heat (e.g. from radiators)
no open fire sources, such as candles, are placed on
the unit
Keep the power connections accessible
Connect the unit to an easily accessible power socket
(AC 120 V ~ 60 Hz) close to the unit. In case the unit has
to be disconnected quickly, the plug has to be within
easy reach.
In order to avoid tripping, do not use an extension cord.
About this manual
Please observe the following safety instructions carefully before
putting the unit into operation. Take note of the warnings on the
unit and in this manual.
Always keep the instruction manual near at hand. If you sell or pass on the
product, make sure to include this manual together with the unit.
CD-ClockRadio_MD4414_USA-rev.fm Seite 2 Freitag, 27. Juni 2003 10:07 10

Stereo CD Clock Radio MD 4414 3
SAFETY INSTRUCTIONS
Do not open or attempt to repair the unit yourself.
In case the power supply cord or the unit is damaged,
pull out the AC power plug immediately.
Under no circumstances attempt to open or repair the
unit yourself. There is danger of electric shock!
If your unit requires service, please contact customer
support.
Thunderstorms
Disconnect from the AC outlet during thunderstorms or
when you will be absent for a long period of time.
CD-Player
The CD player is a Class 1 laser product. The unit is
equipped with a safety system that prevents the emer-
gence of dangerous laser beams during normal opera-
tion. To avoid injury to the eye, do not manipulate or
damage the safety system of the unit.
Battery disposal
Empty batteries do not belong in the household refuse.
The batteries must be disposed of at a designated dis-
posal/recycle point.
Cleaning the CD Clock Radio unit
Always disconnect the AC power plug before cleaning
the unit.
To clean the unit, only use a moistened, soft cloth. Do
not apply chemical solvents or cleaning agents, as they
may damage the surface and/or labelling of the unit.
CD-ClockRadio_MD4414_USA-rev.fm Seite 3 Freitag, 27. Juni 2003 10:07 10

4
SET-UP
Unpacking and placing the unit
`Remove all packaging material including the trans-
port cardboard in the CD compartment.
ATTENTION!
To avoid danger of suffocation, do not let
young children play with plastic bags!
Place the unit on a flat, firm surface. Make sure that
the ventilation slots at the rear are not covered in or-
der to guarantee sufficient ventilation;
no strong heat affects the unit;
the unit is not exposed to direct sunlight;
the unit does not come into contact with liquids, in-
cluding dripping or splash water.
Connecting the power
AC power supply
`Connect the AC plug to an easily accessible AC outlet
120 V ~ 60 Hz. To avoid tripping, do not use an ex-
tension cord.
After connecting power the clock starts at 12:00. The
time flashes in the display until the time is set (see “Set-
ting the clock“).
Check the contents of the box
After unpacking the product, make sure that the following items are supplied:
CD Clock radio unit
Instruction manual
CD-ClockRadio_MD4414_USA-rev.fm Seite 4 Freitag, 27. Juni 2003 10:07 10

Stereo CD Clock Radio MD 4414 5
SET-UP
Power backup battery
To prevent the clock from resetting when power is tem-
porarily disconnected, you can insert a 9 Volt rectangu-
lar battery (type 6LR61; not supplied). Make sure the
unit is connected to the AC power outlet when insert-
ing the battery!
`Remove the lid of the battery compartment at the
rear of the unit.
`Connect both plug-and-socket connections of the
battery with those on the unit. Observe the polarity
(+/-)!
`Insert the battery and close the battery compart-
ment.
Used batteries are not household refuse. Flat
batteries must be disposed of at designated dis-
posal/recycle points.
CD-ClockRadio_MD4414_USA-rev.fm Seite 5 Freitag, 27. Juni 2003 10:07 10

6
BASIC FUNCTIONS
POWER
`When the unit is plugged in, press the POWER key to
turn the unit on. The STANDBY/ON LED is illumi-
nated.
Display brightness – DIMMER
`To increase the display brightness, switch the DIM-
MER (at the rear of the unit) to HI;
`to decrease the display brightness, switch the DIM-
MER to LO.
Setting the clock – CLOCK ADJ.
`If necessary, press POWER to turn the unit off (the
STANDBY/ON LED goes out).
`Make sure no alarm is on (if necessary, press the
ALARM ON/OFF button repeatedly until both alarm
LEDs are out).
`Press the key CLOCK ADJ/PROGRAM until the hour
digit flashes.
`To set the hour, press one of the keys SKIP/TIME SET
until the correct hour shows in the display. – Observe
the PM indicator in the top left corner of the display.
`Press CLOCK ADJ/PROGRAM to save the hour; the
minute digit will flash.
`To set the minutes, press one of the keys SKIP/TIME
SET until the correct minute shows in the display.
`Press the key CLOCK ADJ/PROGRAM . In the display,
d : 1 (Monday) flashes.
`To set a different weekday, press one of the keys
SKIP/TIME SET until the correct day shows.
Note: You have to select the current day of the week
to make the weekend function work correctly.
`Wait for a few seconds or press CLOCK ADJ/PRO-
GRAM again twice to comfirm the set time.
`If you disconnect the unit from the AC outlet
and want the clock time saved, make sure you
have inserted a 9V battery (see above).
d : 1 = Monday
d : 2 = Tuesday
d : 3 = Wednesday
d : 4 = Thursday
d : 5 = Friday
d : 6 = Saturday
d : 7 = Sunday
CD-ClockRadio_MD4414_USA-rev.fm Seite 6 Freitag, 27. Juni 2003 10:07 10

Stereo CD Clock Radio MD 4414 7
ALARM CLOCK
Setting the alarm time
Your CD Clock Radio provides two independent alarm
functions. Each alarm must be set separately.
`If necessary, set the clock (see last page).
`If necessary, press POWER to turn the unit off (the
LED STANDBY/ON goes out).
`To set Alarm 1, press and hold the button ALARM
SET. The LED labelled ALARM1 will blink; after a few
seconds the hour digit will start to blink.
If you want to set Alarm 2, press ALARM SET twice,
so that the LED labelled ALARM2 will blink.
`To set the hour, press one of the SKIP/TIME SET keys
until the correct hour shows in the display.
`Press CLOCK ADJ/PROGRAM to save the hour; the
minute digit will flash.
`To set the minutes, press one of the SKIP/TIME SET
keys until the correct minute shows in the display.
`Wait for a few seconds or press CLOCK ADJ/PRO-
GRAM again to comfirm the set alarm time.
Activating the alarm time
`To activate the alarm, press ALARM ON/OFF:
– press ALARM ON/OFF once to activate ALARM 1
(the LED ALARM1 is illuminated)
– press ALARM ON/OFF twice to activate ALARM 2
(the LED ALARM2 is illuminated)
The display shows the clock time.
– press ALARM ON/OFF three times to activate both
alarms (both LEDs are illuminated).
Choosing alarm functions
Using th e operation switc h at the side of the unit, you
can select the mode in which the alarm is to go off:
for an alarm sound: set position to BUZZER;
for the radio: set positon to RADIO;
for the CD function: set positon to CD.
With the switch BUZZER HI - - LO, you can select a
louder sound (HI) or a softer sound (LO).
CD-ClockRadio_MD4414_USA-rev.fm Seite 7 Freitag, 27. Juni 2003 10:07 10

ALARM CLOCK
8
If you want to be woken by music, the unit must not be
in standby mode.
Note that if the radio or a CD is to start at the set
time, obviously a station must be tuned in or a
CD inserted, respectively (see below).
Alarm off on weekends
`Press the SNOOZE button. The WEEKEND LED will
light up. In this mode, the alarm will not go off on
Saturday and Sunday (d : 6 and d : 7).
`To cancel the weekend function, press SNOOZE
again.
Turning the alarm off
SNOOZE
`In order to interrupt the alarm, press SNOOZE when
the alarm sounds. The alarm will sound again after
nine minutes.
ALARM OFF
`Press POWER / ALARM OFF to turn off the alarm off
for the day. It will sound again at the set time on the
following day (the LED display is still lit).
Turning off
`To turn off the alarm completely, press ALARM ON/
OFF. The LED light in the display goes out.
If you disconnect the unit from the AC outlet and
want the alarm time saved, make sure you have
inserted a 9V battery (see above).
Automatic switch-off – SLEEP
The unit is equipped with a ‘sleep mode’. You can pro-
gram a time period of up to 59 minutes after which the
unit switches off automatically.
If the unit is turned off while the sleep timer is counting
down, it will automatically switch to standby mode.
`When the radio or a CD is playing, press and hold the
SLEEP button. The time will count down from 90,
80 etc to 10, 9, 8 etc.. Release the SLEEP button at the
desired sleep time.
CD-ClockRadio_MD4414_USA-rev.fm Seite 8 Freitag, 27. Juni 2003 10:07 10

Stereo CD Clock Radio MD 4414 9
RADIO OPERATION
Antenna
Your clock radio is equipped with an FM and an AM
band.
`For a good reception of FM stations, uncoil the loop
antenna completely and orient it for the best signal.
`For a good reception of AM stations, a ferrit antenna
is built in. If necessary, orient the unit to obtain a
clear signal.
Selecting a radio station
`Move the operation mode switch at the left side of
the unit to Tuner.
`Adjust the VOLUME control to a low position.
`If necessary, press POWER to turn the unit on.
`Select the required band on the right side of the unit:
AM or FM: With AM stations, a green LED lights up in
the left lower corner of the display; with FM stations,
a green LED lights up in the right lower corner of the
display.
FM MONO for mono FM stations, FM S.T. for stereo
FM stations
`Select a radio station by turning the TUNING knob on
the side of the unit. The band scale pointer (unit
front) indicates the position in the band.
A stereo station is indicated by the lighted FM.ST LED.
A weak station in the FM band might be imby us-
ing FM MONO instead of FM S.T. AM does not
broadcast in stereo.
`To turn the radio off, press POWER or move the op-
eration mode switch to CD.
CD-ClockRadio_MD4414_USA-rev.fm Seite 9 Freitag, 27. Juni 2003 10:07 10

10
CD OPERATION
`Move the operation switch at the left side of the unit
to CD.
`Open the CD compartment by lifting the lid at the
notch.
`Insert a CD with the labelled side facing up. Ensure
that the CD snaps in place in the center.
`Close the CD tray. In the standby mode, the display
will show CD - - and the total number of tracks for a
few seconds. The CD will spin, then stop, then play
automatically.
CD display
In CD mode, the clock time is shown in the display. In
order to see the present status of the CD, press the key
CD DISPLAY.
When the CD is not playing, the CD display will show
the number of tracks on the CD (e. g. 09).
PLAY, PAUSE, STOP
`If necessary, press POWER for the standby mode.
Press PLAY/PAUSE to start the CD. Pressing CD DIS-
PLAY will display the current track number.
`Press PLAY/PAUSE to interrupt the playback. The
track number blinks for a few seconds. Press PLAY/
PAUSE again to resume playback.
`Press STOP to stop the playback.
If you accidentally open the CD compartment
during playback, the rotating CD will stop. Do
not touch the CD while it is still spinning!
Track and fast search – SKIP
`To skip to the next/previous track, press SKIP or
SKIP , respectively. If you press SKIP during
playback, the player will skip to the beginning of the
current track.
`Hold for a few seconds during playback to prompt a
quick search within the current track. The current
track number will show in the display.
CD-ClockRadio_MD4414_USA-rev.fm Seite 10 Freitag, 27. Juni 2003 10:07 10

Stereo CD Clock Radio MD 4414 11
CD OPERATION
REPEAT functions
`Press the REPEAT button once before or during play-
back. The REPEAT LED in the right bottom corner of
the display blinks. The current track is repeated infi-
nitely.
`Press the REPEAT button twice before or during
playback. The REPEAT LED lights up permanently.
All of the tracks on the current CD are repeated infi-
nitely.
`Press the REPEAT button a third time to switch off
the function. The REPEAT LED goes out.
RANDOM function
You can play a random sequence of CD tracks.
`Press the RANDOM button before or during play-
back. The RANDOM LED in the upper left corner of
the display lights up. The tracks will be played in a
completely random order.
`Press RANDOM again to resume normal playback.
Programming tracks
You can program a sequence of up to 20 tracks. The
unit must NOT be in Standby Mode. The STANDBY/ON
LED indicates whether the unit is in standby mode. If it
is lit, press POWER/ALARM OFF to enter STOP mode.
`Press the PROGRAM key. P 01 for the first program
place is shown in the display and the PROGRAM LED
in the lower left corner of the display blinks for a few
seconds.
`While the LED is blinking, select the first track for your
program list with the SKIP keys.
`Press the PROGRAM key again to save the first track.
P 02 is shown is displayed.
`Select the second track for your program list with the
SKIP keys etc.
`To playback the programmed sequence, press PLAY/
PAUSE.
You can apply all of the skip, repeat, and random
functions to the programmed sequence as de-
scribed previously.
CD-ClockRadio_MD4414_USA-rev.fm Seite 11 Freitag, 27. Juni 2003 10:07 10