Texas Instruments TMUX7211 User manual

User’s Guide
TMUX7211, TMUX7212, and TMUX7213 Evaluation
Modules
ABSTRACT
This user's guide describes the characteristics, operation, and use of the TMUX7211, TMUX7212, and
TMUX7213 evaluation modules (EVM), which is represented by TMUX721xEVM in this user's guide. A complete
schematic diagram, printed-circuit board layouts, and bill of materials are included in this document.
Table of Contents
1 Introduction.............................................................................................................................................................................2
2 Information About Cautions and Warnings..........................................................................................................................2
3 Features of this EVM.............................................................................................................................................................. 2
4 EVM Images.............................................................................................................................................................................3
5 EVM Setup............................................................................................................................................................................... 5
6 EVM Connectors and Test Points..........................................................................................................................................6
6.1 Connectors.........................................................................................................................................................................6
6.2 Test Points..........................................................................................................................................................................6
7 PCB Layouts............................................................................................................................................................................7
8 Schematics..............................................................................................................................................................................9
9 Bill of Materials..................................................................................................................................................................... 10
10 Related Documentation......................................................................................................................................................10
List of Figures
Figure 4-1. TMUX721xEVM Topside View...................................................................................................................................3
Figure 4-2. TMUX721xEVM Bottom View....................................................................................................................................4
Figure 7-1. Top View Illustration of the TMUX721xEVM Layout..................................................................................................7
Figure 7-2. Bottom View Illustration of the TMUX721xEVM Layout............................................................................................ 8
Figure 8-1. Schematic of the TMUX721xEVM (DNI View)...........................................................................................................9
List of Tables
Table 1-1. Device Comparison Table........................................................................................................................................... 2
Table 5-1. Component Pad to TMUX721x Pin Matrix.................................................................................................................. 5
Table 5-2. TMUX7211 Truth Table............................................................................................................................................... 5
Table 5-3. TMUX7212 Truth Table...............................................................................................................................................5
Table 5-4. TMUX7213 Truth Table...............................................................................................................................................5
Table 6-1. Jumper and Header Postion Functions.......................................................................................................................6
Table 6-2. Test Point Signal Connections.................................................................................................................................... 6
Table 9-1. TMUX721xEVM Bill of Materials...............................................................................................................................10
Trademarks
All trademarks are the property of their respective owners.
www.ti.com Table of Contents
SCDU024 – DECEMBER 2020
Submit Document Feedback
TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules 1
Copyright © 2020 Texas Instruments Incorporated

1 Introduction
The TMUX7211EVM, TMUX7212EVM, and TMUX7213EVM support evaluation of the TMUX7211, TMUX7212,
and TMUX7213 devices in the 16-pin TSSOP (PW) package respectively. The TMUX7211, TMUX7212, and
TMUX7213 are complementary metal-oxide semiconductor (CMOS) switches with four independently selectable
1:1, single-pole single-throw (SPST) switch channels. These device support dual supplies (±4.5 V to ±22 V), a
single supply (4.5 V to 44 V), or asymmetric supplies (such as VDD = 12 V, VSS = –5 V). TMUX7211,
TMUX7212, and TMUX7213 support bidirectional analog and digital signals on the source (Sx) and drain (Dx)
pins ranging from VSS to VDD. All logic control inputs support logic levels from 1.8 V to VDD, ensuring both TTL
and CMOS logic compatibility when operating in the valid supply voltage range. The Fail-Safe Logic circuitry
allows voltages on the control pins to be applied before the supply pin, protecting the devices from potential
damage.
Table 1-1. Device Comparison Table
Product Description
TMUX7211 Low-Leakage-Current, Precision, 4-Channel, 1:1 (SPST) Switches
(Normally Closed)
TMUX7212 Low-Leakage-Current, Precision, 4-Channel, 1:1 (SPST) Switches
(Normally Open)
TMUX7213 Low-Leakage-Current, Precision, 4-Channel, 1:1 (SPST) Switches
(Dual Open and Dual Closed)
2 Information About Cautions and Warnings
CAUTION
This EVM contains components that can potentially be damaged by electrostatic discharge. Always
transport and store the EVM in its supplied ESD bag when not in use. Handle using an antistatic
wristband. Operate on an antistatic work surface. For more information on proper handling, see
Electrostatic Discharge (ESD) application report.
3 Features of this EVM
The EVM has the following features:
• 35 tests points (including 7 GND test points), which allows easy access for measuring signals
• Quick prototyping and testing setup for the TMUX7211, TMUX7212, and TMUX7213 devices in the 16-pin
TSSOP (PW) package
• No specific TMUX721x device is supplied or soldered to the evaluation modules, which allows flexibility to
choose the desired IC for evaluation
• Support for both single supply and dual supply operation
• Six power supply decoupling capacitors (2 × 0.1 μF, 2 × 1 μF, and 2 × 10 μF)
• Jumpers to eight signal lanes, VDD and VSS power rails, and control signals
• Eight pads are available for placement of SMA connectors
• Pads are available for pull-up or pull-down resistors on control signal pathways
• Pads are available for surge protection diodes
• 0805 capacitor pads are available on all signal pathways referenced to ground
Introduction www.ti.com
2TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules SCDU024 – DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated

4 EVM Images
Figure 4-1. TMUX721xEVM Topside View
www.ti.com EVM Images
SCDU024 – DECEMBER 2020
Submit Document Feedback
TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules 3
Copyright © 2020 Texas Instruments Incorporated

Figure 4-2. TMUX721xEVM Bottom View
EVM Images www.ti.com
4TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules SCDU024 – DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated

5 EVM Setup
The following instructions are for setting up the EVM:
1. The control inputs and signal lines may be loaded by soldering components to signal path pads as needed.
Table 5-1 describes which load pads correspond to what pin on the DUT. SMA connectors can be soldered to
corresponding pads accordingly.
Table 5-1. Component Pad to TMUX721x Pin Matrix
IC Pin # 0805 Capacitor
Pad ID
Protection
Diode Pad
Protection
Diode PN#
0603 Pull-up
Pad
0603 Pull-Down
Pad
Pad Locations
D1 2 C19 D7 SMAJ36CA R36 R41 Top Layer
S1 3 C11 D3 SMAJ36CA R13 R19 Top Layer
S4 6 C14 D6 SMAJ36CA R26 R31 Top Layer
D4 7 C16 D9 SMAJ36CA R43 R49 Top Layer
D3 10 C17 D10 SMAJ36CA R46 R51 Top Layer
S3 11 C13 D5 SMAJ36CA R23 R29 Top Layer
S2 14 C12 D4 SMAJ36CA R14 R21 Top Layer
D2 15 C15 D8 SMAJ36CA R33 R39 Top Layer
2. The board is powered by attaching ±5 V to ±22 V dual power supply or 5 V to 44 V single power supply to the
screw terminal J2, with VDD, VSS, and GND oriented as specified in Table 6-1. Jumper J1 should be shorted
only when using single sided operation.
3. Jumpers should be placed according to the desired functionality. Reference TMUX7211, TMUX7212, and
TMUX7213 Truth Tables (Table 5-2 through Table 5-4) to configure the corresponding control jumpers.
Additional signal path jumpers may be configured as shown in Table 6-1.
Table 5-2. TMUX7211 Truth Table
SEL x(1) Channel x
0 Channel x ON
1 Channel x OFF
Table 5-3. TMUX7212 Truth Table
SEL x Channel x
0 Channel x OFF
1 Channel x ON
Table 5-4. TMUX7213 Truth Table
SEL x Channel 1 and Channel 4 Channel 2 and Channel 3
0 OFF ON
1 ON OFF
(1) X denotes 1, 2, 3, or 4 for the corresponding channel.
www.ti.com EVM Setup
SCDU024 – DECEMBER 2020
Submit Document Feedback
TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules 5
Copyright © 2020 Texas Instruments Incorporated

6 EVM Connectors and Test Points
6.1 Connectors
Table 6-1. Jumper and Header Postion Functions
Jumper ID Header
Pos. 1
Header
Pos. 2
Header
Pos. 3
Header
Pos. 4
Header
Pos. 5
Header
Pos. 6
Board Function Fitted
(Y/N)
J1 VSS GND N/A N/A N/A N/A Single Supply Short VSS to GND Y
J2 VSS GND VDD N/A N/A N/A Power Supplies Y
J3 VDD SEL 1 GND N/A N/A N/A Can Short SEL line to VDD or GND Y
J4 VDD SEL 2 GND N/A N/A N/A Can Short SEL line to VDD or GND Y
J5 VDD SEL 3 GND N/A N/A N/A Can Short SEL line to VDD or GND Y
J6 VDD SEL 4 GND N/A N/A N/A Can Short SEL line to VDD or GND Y
J7 N/A VDD GND I/O (S1) N/A VSS Signal Input—can short to either rail Y
J8 VDD N/A I/O (S2) GND VSS N/A Signal Input—can Short to either rail Y
J9 VDD N/A I/O (S3) GND VSS N/A Signal Input—can Short to either rail Y
J10 N/A VDD GND I/O (S4) N/A VSS Signal Input—can short to either rail Y
J11 VDD N/A I/O (D2) GND VSS N/A Signal Input—can Short to either rail Y
J12 N/A VDD GND I/O (D1) N/A VSS Signal Input—can short to either rail Y
J13 N/A VDD GND I/O (D4) N/A VSS Signal Input—can short to either rail Y
J14 VDD N/A I/O (D3) GND VSS N/A Signal Input—can Short to either rail Y
S1.1 I/O (S1) GND GND GND GND N/A SMA Pad N
D1.1 I/O (D1) GND GND GND GND N/A SMA Pad N
S2.1 I/O (S2) GND GND GND GND N/A SMA Pad N
D2.1 I/O (D2) GND GND GND GND N/A SMA Pad N
S3.1 I/O (S3) GND GND GND GND N/A SMA Pad N
D3.1 I/O (D3) GND GND GND GND N/A SMA Pad N
S4.1 I/O (S4) GND GND GND GND N/A SMA Pad N
D4.1 I/O (D4) GND GND GND GND N/A SMA Pad N
6.2 Test Points
Table 6-2. Test Point Signal Connections
Signal Test Point ID
VDD VDD1 and VDD2
GND GND1, GND2, GND3, GND4, GND5, GND6, and GND7
VSS VSS1 and VSS2
S1 S1.0 and S1.2
D1 D1.0 and D1.2
S2 S2.0 and S2.2
D2 D2.0 and D2.2
S3 S3.0 and S3.2
D3 D3.0 and D3.2
S4 S4.0 and S4.2
D4 D4.0 and D4.2
SEL1 SEL1.0 and SEL1.1
SEL2 SEL2.0 and SEL2.1
SEL3 SEL3.0 and SEL3.1
SEL4 SEL4.0 and SEL4.1
EVM Connectors and Test Points www.ti.com
6TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules SCDU024 – DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated

7 PCB Layouts
Figure 7-1 and Figure 7-2 show the EVM PCB layout images.
Figure 7-1. Top View Illustration of the TMUX721xEVM Layout
www.ti.com PCB Layouts
SCDU024 – DECEMBER 2020
Submit Document Feedback
TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules 7
Copyright © 2020 Texas Instruments Incorporated

Figure 7-2. Bottom View Illustration of the TMUX721xEVM Layout
PCB Layouts www.ti.com
8TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules SCDU024 – DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated

8 Schematics
Schematic views of the TMUX721xEVM. Figure 8-1 shows DNI view, removing DNI parts which are not included on the evaluation model out-of-the-box.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
D D
C C
B B
A A
2 3
9/4/2020
TMUXx212_EVM.schdoc
Sheet Title:
Size:
Mod. Date:
File: Sheet: of A2 http://www.ti.com
Contact:
Project Title:
Designed for:
Assembly Variant: 001
©Texas Instruments
Drawn By:
Engineer:
Texas Instruments and/or its licensors do not warrant the accuracy or completeness of this specification or any information contained therein. Texas Instruments and/or its licensors do not
warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its
licensors do not warrant that the design is production worthy. You should completely validate and test your design implementation to confirm the system functionality for your application.
Not in version controlSVN Rev:
Number: Rev:
TID #:
Orderable:
GND
VDD1 GND5 GND6
GND
GND7GND4GND3GND2
1
MNT_1
MNT_2
MNT_3
MNT_4
S3.1
DNP
S3
1
MNT_1
MNT_2
MNT_3
MNT_4
S1.1
DNP
1
MNT_1
MNT_2
MNT_3
MNT_4
S2.1
DNP
S1 S2
36V
D1
SMAJ36A
DNP
1
MNT_1
MNT_2
MNT_3
MNT_4
D2.1
DNP
D2
1
MNT_1
MNT_2
MNT_3
MNT_4
S4.1
DNP
1
MNT_1
MNT_2
MNT_3
MNT_4
D1.1
DNP
S4 D1
1
MNT_1
MNT_2
MNT_3
MNT_4
D4.1
DNP
1
MNT_1
MNT_2
MNT_3
MNT_4
D4.1
DNP
D3 D4
1µF
100V
C3
GND
100nF
100V
C1
1.0k
R13
DNP
VDD
1.0k
R19
DNP
GND
0
R15
0
R16
SEL1.0 SEL1.1
GND
0
R3
VDD
VSS
GND
GND
GND1
GND
GND
VSS1
36V
D2
SMAJ36A
DNP
100V
10uF
C5
1µF
100V
C4
GND
100nF
100V
C2
100V
10uF
C6
VDD VSS
1µF
100V
C7
DNP
1
2
J1
1µF
100V
C11
DNP
36V
D3
SMAJ36CA
DNP
S1
VSS
1.0k
R14
DNP
VDD
S2.2S2.0
1.0k
R21
DNP
GND
0
R17
0
R18
1µF
100V
C12
DNP
36V
D4
SMAJ36CA
DNP
S2
VSS
1.0k
R23
DNP
VDD
S3.2
S1
S2
S3
S4
S3.0
1.0k
R29
DNP
GND
0
R24
0
R25
VDD
1µF
100V
C13
DNP
36V
D5
SMAJ36CA
DNP
S3
VSS
1.0k
R26
DNP
VDD
S4.2S4.0
1.0k
R31
DNP
GND
0
R27
0
R28
1µF
100V
C14
DNP
36V
D6
SMAJ36CA
DNP
S4
VSS
VDD
GND
1
2
3
J3 1.0k
R1
DNP
VDD
1.0k
R5
DNP
GND
SEL1GND
VDD VSS
SEL2.0 SEL2.1
GND
0
R4
1µF
100V
C8
DNP
VDD
GND
1
2
3
J4 1.0k
R2
DNP
VDD
1.0k
R6
DNP
GND
SEL2
SEL3.0 SEL3.1
GND
0
R9
1µF
100V
C9
DNP
VDD
GND
1
2
3
J5 1.0k
R7
DNP
VDD
1.0k
R11
DNP
GND
SEL3
SEL4.0 SEL4.1
GND
0
R10
1µF
100V
C10
DNP
VDD
GND
1
2
3
J6 1.0k
R8
DNP
VDD
1.0k
R12
DNP
GND
SEL4
GND GND GND
GND GND GND
GND GND
VDD
D1.2D1.0
1.0k
R41
DNP
GND
0
R37
36V
D7
SMAJ36CA
DNP
D1
VSS
1µF
100V
C19
DNP
1.0k
R36
DNP
0
R38
S1.0 S1.2
VSS
VDD
GND
VSS
D1 2
SEL2
16 S2
14 D2 15
GND 5
D3 10 S3
11
SEL3
9
D4 7 S4
6
SEL4
8
VDD
13
SEL1
1S1
3
VSS 4 NC
12
TMUX7212PWR
U1
DNP
D1
D2
D3
D4
SEL2
SEL1
SEL3
SEL4
VDD
D2.2D2.0
1.0k
R39
DNP
GND
0
R34
36V
D8
SMAJ36CA
DNP
D2
VSS
1µF
100V
C15
DNP
1.0k
R33
DNP
0
R35
VSS
VDD
GND
VDD
D3.2D3.0
1.0k
R51
DNP
GND
0
R47
36V
D10
SMAJ36CA
DNP
D3
VSS
1µF
100V
C17
DNP
1.0k
R46
DNP
0
R48
VSS
VDD
VDD
D4.2D4.0
1.0k
R49
DNP
GND
0
R44
36V
D9
SMAJ36CA
DNP
D4
VSS
1µF
100V
C16
DNP
1.0k
R43
DNP
0
R45
VSS
VDD
GND
1.0k
R40
DNP
1.0k
R50
DNP 1.0k
R52
DNP
1.0k
R42
DNP
1.0k
R22
DNP
1.0k
R32
DNP
1.0k
R30
DNP
1.0k
R20
DNP
VSS
VDD
VSS
VDD
VSS
VDD
VSS
VDD
GND
GNDGND
GND
GND
GND
VSS2
1 2
3 4
5 6
J9
61300621121
1 2
3 4
5 6
J7
61300621121
1 2
3 4
5 6
J8
61300621121
1 2
3 4
5 6
J10
61300621121
1 2
3 4
5 6
J13
61300621121
1 2
3 4
5 6
J11
61300621121
1 2
3 4
5 6
J12
61300621121
1 2
3 4
5 6
J14
61300621121
VDD2
1
2
3
J2
PIC101 PIC102
COC1
PIC201 PIC202
COC2
PIC301 PIC302
COC3
PIC401 PIC402
COC4
PIC501
PIC502
COC5
PIC601
PIC602
COC6
PIC701
PIC702
COC7
PIC801
PIC802
COC8
PIC901
PIC902
COC9
PIC1001
PIC1002
COC10
PIC1101
PIC1102
COC11
PIC1201
PIC1202
COC12
PIC1301
PIC1302
COC13
PIC1401
PIC1402
COC14
PIC1501
PIC1502
COC15
PIC1601
PIC1602
COC16
PIC1701
PIC1702
COC17
PIC1901
PIC1902
COC19
PID101
PID102
COD1
PID10001
COD100
PID10101
PID10102
PID10103
PID10104
PID10105
COD101
PID10201
COD102
PID201
PID202
COD2
PID20001
COD200
PID20101
PID20102
PID20103
PID20104
PID20105
COD201
PID20201
COD202
PID301
PID302
COD3
PID30001
COD300
PID30201
COD302
PID401
PID402
COD4
PID40001
COD400
PID40101
PID40102
PID40103
PID40104
PID40105
COD401
PID40101
PID40102
PID40103
PID40104
PID40105
PID40201
COD402
PID501
PID502
COD5
PID601
PID602
COD6
PID701
PID702
COD7
PID801
PID802
COD8
PID901
PID902
COD9
PID1001
PID1002
COD10
PIGND101
COGND1
PIGND201
COGND2
PIGND301
COGND3
PIGND401
COGND4
PIGND501
COGND5
PIGND601
COGND6
PIGND701
COGND7
PIJ101
PIJ102
COJ1
PIJ201
PIJ202
PIJ203
COJ2
PIJ301
PIJ302
PIJ303
COJ3
PIJ401
PIJ402
PIJ403
COJ4
PIJ501
PIJ502
PIJ503
COJ5
PIJ601
PIJ602
PIJ603
COJ6
PIJ701 PIJ702
PIJ703 PIJ704
PIJ705 PIJ706
COJ7
PIJ801 PIJ802
PIJ803 PIJ804
PIJ805 PIJ806
COJ8
PIJ901 PIJ902
PIJ903 PIJ904
PIJ905 PIJ906
COJ9
PIJ1001 PIJ1002
PIJ1003 PIJ1004
PIJ1005 PIJ1006
COJ10
PIJ1101 PIJ1102
PIJ1103 PIJ1104
PIJ1105 PIJ1106
COJ11
PIJ1201 PIJ1202
PIJ1203 PIJ1204
PIJ1205 PIJ1206
COJ12
PIJ1301 PIJ1302
PIJ1303 PIJ1304
PIJ1305 PIJ1306
COJ13
PIJ1401 PIJ1402
PIJ1403 PIJ1404
PIJ1405 PIJ1406
COJ14
PIR101
PIR102
COR1
PIR201
PIR202
COR2
PIR301 PIR302
COR3
PIR401 PIR402
COR4
PIR501
PIR502
COR5
PIR601
PIR602
COR6
PIR701
PIR702
COR7
PIR801
PIR802
COR8
PIR901 PIR902
COR9
PIR1001 PIR1002
COR10
PIR1101
PIR1102
COR11
PIR1201
PIR1202
COR12
PIR1301
PIR1302
COR13
PIR1401
PIR1402
COR14
PIR1501 PIR1502
COR15
PIR1601 PIR1602
COR16
PIR1701 PIR1702
COR17
PIR1801 PIR1802
COR18
PIR1901
PIR1902
COR19
PIR2001
PIR2002
COR20
PIR2101
PIR2102
COR21
PIR2201
PIR2202
COR22
PIR2301
PIR2302
COR23
PIR2401 PIR2402
COR24
PIR2501 PIR2502
COR25
PIR2601
PIR2602
COR26
PIR2701 PIR2702
COR27
PIR2801 PIR2802
COR28
PIR2901
PIR2902
COR29
PIR3001
PIR3002
COR30
PIR3101
PIR3102
COR31
PIR3201
PIR3202
COR32
PIR3301
PIR3302
COR33
PIR3401 PIR3402
COR34
PIR3501 PIR3502
COR35
PIR3601
PIR3602
COR36
PIR3701 PIR3702
COR37
PIR3801 PIR3802
COR38
PIR3901
PIR3902
COR39
PIR4001
PIR4002
COR40
PIR4101
PIR4102
COR41
PIR4201
PIR4202
COR42
PIR4301
PIR4302
COR43
PIR4401 PIR4402
COR44
PIR4501 PIR4502
COR45
PIR4601
PIR4602
COR46
PIR4701 PIR4702
COR47
PIR4801 PIR4802
COR48
PIR4901
PIR4902
COR49
PIR5001
PIR5002
COR50
PIR5101
PIR5102
COR51
PIR5201
PIR5202
COR52
PIS10001
COS100
PIS10101
PIS10102
PIS10103
PIS10104
PIS10105
COS101
PIS10201
COS102
PIS20001
COS200
PIS20101
PIS20102
PIS20103
PIS20104
PIS20105
COS201
PIS20201
COS202
PIS30001
COS300
PIS30101
PIS30102
PIS30103
PIS30104
PIS30105
COS301
PIS30201
COS302
PIS40001
COS400
PIS40101
PIS40102
PIS40103
PIS40104
PIS40105
COS401
PIS40201
COS402
PISEL10001
COSEL100
PISEL10101
COSEL101
PISEL20001
COSEL200
PISEL20101
COSEL201
PISEL30001
COSEL300
PISEL30101
COSEL301
PISEL40001
COSEL400
PISEL40101
COSEL401
PIU101 PIU102
PIU103
PIU104
PIU105
PIU106 PIU107
PIU108
PIU109
PIU1010 PIU1011
PIU1012
PIU1013
PIU1014 PIU1015
PIU1016
COU1
PIVDD101
COVDD1
PIVDD201
COVDD2
PIVSS101
COVSS1
PIVSS201
COVSS2
Figure 8-1. Schematic of the TMUX721xEVM (DNI View)
www.ti.com Schematics
SCDU024 – DECEMBER 2020
Submit Document Feedback
TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules 9
Copyright © 2020 Texas Instruments Incorporated

9 Bill of Materials
Table 9-1 details the EVM bill of materials.
Table 9-1. TMUX721xEVM Bill of Materials
Designator Component Manufactuer Description Quantity
H9, H10, H11, H12 SJ-5303 (CLEAR) 3M Bumpon, Hemisphere, 0.44 X
0.20, Clear
4
C1, C2 C1608X7S2A104K080AB TDK CAP, CERM, 0.1 µF, 100 V, ±10%,
X7S, 0603
2
C3, C4 C2012X7S2A105K125AB TDK CAP, CERM, 1 µF, 100 V, ± 10%,
X7S, 0805
2
C5, C6 CKG45NX7S2A106M500JJ TDK CAP, CERM, 10 µF, 100 V, ± 20%,
X7S, AEC-Q200 Grade 1, 1812
2
J1 PEC02SAAN Sullins Connector
Solutions
Header, 100 mil, 2×1, Tin, TH 1
J3, J4, J5, J6 PEC03SAAN Sullins Connector
Solutions
Header, 100 mil, 3×1, Tin, TH 4
J7, J8, J9, J10, J11, J12, J13,
J14
61300621121 Wurth Elektronik Header, 2.54 mm, 3×2, Gold, TH 8
J2 691214110003 Wurth Elektronik Terminal Block, 3.5 mm, 3×1, TH 1
R3, R4, R9, R10, R15, R16,
R17, R18, R24, R25, R27,
R28, R34, R35, R37, R38,
R44, R45, R47, R48
RMCF0603ZT0R00 Stackpole Electronics
Inc
RES, 0, 1%, 0.1 W, AEC-Q200
Grade 0, 0603
20
SH-J1, SH-J2, SH-J3, SH-J4,
SH-J5, SH-J6, SH-J7, SH-J8
SNT-100-BK-G Samtec Shunt, 100 mil, Gold plated, Black 8
VDD1, VDD2, VSS1, VSS2 5005 Keystone Test Point, Compact, Red, TH 4
D1.0, D1.2, D2.0, D2.2, D3.0,
D3.2, D4.0, D4.2, S1.0, S1.2,
S2.0, S2.2, S3.0, S3.2, S4.0,
S4.2, SEL1.0, SEL1.1,
SEL2.0, SEL2.1, SEL3.0,
SEL3.1, SEL4.0, SEL4.1
5122 Keystone Test Point, Compact, Blue, TH 24
GND1, GND2, GND3, GND4,
GND5, GND6, GND7
5006 Keystone Test Point, Compact, Black, TH 7
10 Related Documentation
• Texas Instruments, Electrostatic Discharge (ESD) application report
Bill of Materials www.ti.com
10 TMUX7211, TMUX7212, and TMUX7213 Evaluation Modules SCDU024 – DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated