Texas Instruments TPA741 MSOP User manual

November 2000 Mixed-Signal Products
 
  
 
User’s Guide
SLOU086

IMPORTANT NOTICE
TexasInstrumentsanditssubsidiaries(TI)reservetherighttomakechangestotheirproductsortodiscontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TIdeemsnecessarytosupportthiswarranty. Specifictestingofallparametersofeachdeviceis not necessarily
performed, except those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TIassumesnoliabilityforapplicationsassistance or customer product design. TI does not warrantorrepresent
thatanylicense,eitherexpressorimplied,isgrantedunderanypatentright,copyright,maskworkright,orother
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated

Information About Cautions and Warnings
iii
Read This First
Preface
Read This First
Information About Cautions and Warnings
This book may contain cautions and warnings.
This is an example of a caution statement.
A caution statement describes a situation that could potentially
damage your software or equipment.
This is an example of a warning statement.
A warning statement describes a situation that could potentially
cause harm to you.
The information in a caution or a warning is provided for your protection.
Please read each caution and warning carefully.
Related Documentation From Texas Instruments
 TI Plug-N-Play Audio Amplifier Evaluation Platform (literature
number SLOU011) provides detailed information on the evaluation
platform and its use with TI audio evaluation modules.
 TPA741 700-mW LOW-VOLTAGE AUDIO POWER AMPLIFIER
(literature number SLOS316) This is the data sheet for the TPA741
audio amplifier integrated circuit.

FCC Warning
iv
FCC Warning
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can radiate radio frequency energy and has not been
testedfor compliance with thelimitsof computing devices pursuanttosubpart
Jofpart 15of FCCrules, whicharedesignedtoprovidereasonableprotection
against radio frequency interference. Operation of this equipment in other
environments may cause interference with radio communications, in which
case the user at his own expense will be required to take whatever measures
may be required to correct this interference.

Running Title—Attribute Reference
v
Contents
Contents
1 Introduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Feature Highlights 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Description 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 TPA741 EVM Specifications 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Operation 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Precautions 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Quick Start List for Platform 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Quick Start List for Stand-Alone 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 References 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.1 TPA741 MSOP EVM Connected for BTL Output 2-5. . . . . . . . . . . . . . . . . . . . . . . . .
2.4.2 TPA741 MSOP EVM Schematic Diagram 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.3 TPA741 MSOP Audio Power Amplifier Evaluation Module Parts List 2-6. . . . . . . .
2.4.4 TPA741 MSOP EVM PCB Layers 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures
1–1 The TI TPA741 Audio Amplifier Evaluation Module 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–1 Quick Start Platform Map 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–2 Quick Start Module Map 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–3 TPA741 MSOP EVM Connected for Stereo BTL Output 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–4 TPA741 MSOP EVM Schematic Diagram 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–5 TPA741 EVM PCB 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–6 TPA741 EVM Silkscreen 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–7 TPA741 EVM Top Layer 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–8 TPA741 EVM Bottom Layer 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tables
2–1 Typical TI Plug-N-Play Platform Jumper and Switch Settings for the
TPA741 MSOP EVM 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–2 Platform Jumper and Switch Settings for the TPA741 MSOP EVM 2-3. . . . . . . . . . . . . . . . . . .
2–3 TPA741 MSOP EVM Parts List 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Running Title—Attribute Reference
vi

1-1
Introduction
Introduction
This chapter provides an overview of the Texas Instruments (TI) TPA741
MSOPaudio amplifierevaluationmodule(SLOP343). It includes alistofEVM
features, a brief description of the module illustrated with a pictorial diagram,
and a list of EVM specifications.
Topic Page
1.1 Feature Highlights 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Description 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 TPA741 EVM Specifications 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1

Feature Highlights
1-2
Introduction
1.1 Feature Highlights
The TI TPA741 MSOP audio amplifier evaluation module and the TI
plug-n-play audio amplifier evaluation platform include the following features:
TPA741 Low-Voltage Audio Power Amplifier Evaluation Module
Single channel, bridge-tied load (BTL)
2.5-V and 5.5-V operation
700-mW output power into 8 Ωat 5 V, BTL
Internal depop circuitry
Internal thermal and short-circuit protection
Module gain is set at –4 V/V in BTL mode, –2 V/V in SE mode
Differential signal inputs
Quick and Easy Configuration with The TI plug-n-play audio amplifier
evaluation platform
Evaluation module is designed to simply plug into the platform,
automatically making all signal, control, and power connections
Platform provides flexible power options
Jumpers on the platform select power and module control options
Switches on the platform route signals
Platformprovides quick and easy audio inputand output connections
Platform Power Options
Onboard 9-V battery
External 5-V–15-V (VCC) supply inputs
External regulated VDD supply input
Socket for onboard 5-V/3.3-V VDD voltage regulator EVM
Onboard overvoltage and reverse polarity power protection
Platform Audio Input and Output Connections
Left and right RCA phono jack inputs
Miniature stereo phone jack input
Left and right RCA phono jack outputs
Left and right compression speaker terminal outputs
Miniature stereo headphone jack output

Description
1-3
Introduction
1.2 Description
The TPA741 MSOP audio power amplifier evaluation module is a complete,
low-power single-channel audio power amplifier. It consists of the TI TPA741
700-mWlow-voltage audiopower amplifierICin averysmall MSOPpackage,
along with a small number of other parts mounted on a circuit board that is
approximately one and a quarter inches square (see Figure 1–1).
Figure 1–1.The TI TPA741 Audio Amplifier Evaluation Module
OUT+
IN–
IN+
VDD GND
U1 †
Shutdown
R5
OUT–
GND
C4
TEXAS
INSTRUMENTS
SLOP343
TPA741 MSOP EVM
C6
C5
S1 R1
+
R2
C2
C1
R3
R4
C3
†Due to the very small size of the MSOP IC package, the standard part number TPA741 is re-
placed with the code TIAJD.
Single in-line header pins are mounted to the underside of the module circuit
board. These pins allow the EVM to be plugged into the TI plug-n-play audio
amplifier evaluation platform or to be wired directly into existing circuits and
equipment when used stand-alone.
Theplatform,whichhasroomforapairofTPA741MSOPevaluationmodules,
is a convenient vehicle for demonstrating TI’s audio power amplifier and
related evaluation modules. The EVMs simply plug into the platform, which
automatically provides power to the modules, interconnects them correctly,
andconnectsthemtoaversatilearrayofstandardaudioinputandoutputjacks
and connectors. Easy-to-use configuration controls allow the platform and
EVMs to quickly model many possible end-equipment configurations.
There is nothing to build, nothing to solder, and nothing but the speakers
included with the platform to hook up.
1.3 TPA741 EVM Specifications
Supply voltage range, VDD 2.5 V to 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply current, IDD 450 mA, max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output power, PO:8-ΩBTL, VDD = 5 V 700 mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio input voltage, VI2 Vpp, max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum load impedance, RL8 Ω. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-4
Introduction

2-1
Operation
Operation
Follow the steps in this chapter to prepare the TPA741 MSOP audio amplifier
EVM for use. Using the TPA741 MSOP EVM with the TI plug-n-play audio
amplifierevaluationplatform is a quick and easy way to connect power, signal
andcontrol inputs, andsignaloutputsto the EVM,usingstandard connectors.
However, the audio amplifier evaluation module can be used stand-alone by
makingconnectionsdirectlytothemodulepins,anditcanbewireddirectlyinto
existing circuits or equipment.
Theplatform switch and jumper settings shown in Table2–1aretypicalfor the
TPA741MSOPEVM.They causetheTPA741amplifierICon theEVMto shut
down when a plug is inserted into platform headphone jack J10.
Table 2–1. Typical TI Plug-N-Play Platform Jumper and Switch Settings for the TPA741
MSOP EVM
EVM JP6 JP7 JP8 S2 S3
TPA741 Mute X Hi See Note 2 X
Notes: 1) X = Don’t care
2) Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when
no signal conditioning board is installed.
Topic Page
2.1 Precautions 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Quick Start List for Platform 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Quick Start List for Stand-Alone 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 References 2–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2

Precautions
2-2
Operation
2.1 Precautions
Power Supply Input Polarity and Maximum Voltage
Always ensure that the polarity and voltage of the external power
connected to VCC power input connector J1, J2, and/or VDD power
input connector J6 are correct. Overvoltage or reverse-polarity
power applied to these terminals can open onboard soldered-in
fuses and cause other damage to the platform, installed evaluation
modules, and/or the power source.
Inserting or Removing EVM Boards
Do not insert or remove EVM boards with power applied – damage
to the EVM board, the platform, or both may result.
Figure 2–1. Quick Start Platform Map
Signal Conditioning
****CAUTION****
Do not insert or remove
EVM boards with power
applied
ICC
JP4
F1
VR1
R1
JP3
JP2 JP1 AC/DC
(J2)
VCC(J1)
D1 D2 D3
D4 J2
J3 J4 J5
AC/DC
In
VCC
In
+
J1
DC
SOURCE
LED1 VCC
LED2 VDD
R2
JP5 IDD
B1
U6
POWER
SUPPLY
U3 U4
U5
U1
U2
Audio
Power
Amps
OnOff ConditioningS2
J7 J8 Right
Out Left
Out
+– +–
JP6
Mode
Mute
Spk(U2-U4)
JP8
J9 Left
Out
JP7
S3 HP Source
U2-U4
U5
Polarity
Lo
Hi
HP(U5)
C3 C2
++
R3
R5
J10
Stereo
HP Out
TP1
GND
Plug-N-PlayAudioAmplifier
Evaluation Platform
SLOP097 Rev. C.1
Stereo
In
Right
In Left
In
J6 In/Out VDD
F2
VR2 +
DC
Power
In/Out
Speaker
Output
Headphone
Output
Audio
Input
Power
Input
Batt
C1+
Right
Out
On Off Pwr
S1
TEXAS INSTRUMENTS 1997
R4
6a
1
3
6b
6b
6b 6b
89
10
9
2
4
5

Quick Start List for Platform
2-3
Operation
2.2 Quick Start List for Platform
FollowthesestepswhenusingtheTPA741MSOPEVMwiththeTIplug-n-play
audio amplifier evaluation platform (see the platform user’s guide, SLOU011,
for additional details). Numbered callouts for selected steps are shown in
Figure 2–1, and details appear in Chapter 3.
Platform preparations
1) Ensure that all external power sources are set to off and that the platform
power switch S1 is set to off.
2) Install a TPA741 MSOP module in platform sockets U3 and U4 for stereo
operation (or a module in either U3
or U4 for single channel operation),
taking care to align the module pins correctly.
3) Use switch S2 to select or bypass the signal conditioning EVM (U1).
4) Set control signal polarity jumper JP8 to Hi.
5) SetjumperJP6toselectthemutecontrolinput(whichcausestheTPA741
to shut down if a plug is inserted into platform headphone jack J10).
Table 2–2. Platform Jumper and Switch Settings for the TPA741 MSOP EVM
EVM JP6 JP7 JP8 S2 S3
TPA741 Mute X Hi See Note 2 X
Notes: 1) X = Don’t care
2) Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when
no signal conditioning board is installed.
Power supply
6) Select and connect the power supply:
a) Connectan external regulated powersupplyset to a voltagebetween
2.5Vand 5.5V toplatformVDD powerinputconnectorJ6,takingcare
to observe marked polarity,
or
b) Install a voltage regulator EVM (SLVP097 or equivalent.) in platform
socket U6. Install a 9-V battery in B1 or connect a 7 V–12 V power
sourcetoaplatformVCCpowerinputJ1orJ2andjumpertheappropri-
ate power input (see platform user’s guide).
Inputs and outputs
7) Ensure that signal source level is set to minimum.
8) Connect the audio source to left and right RCA phono jacks J3 and J5 or
to stereo miniature phone jack J4.
9) Connect 8-Ω–32-Ωspeakers to left and right RCA jacks J7 and J9 or to
stripped wire connector J8.
Power Up
10) Verify correct voltage and input polarity andset the external power supply
toON.IfVCCandanon-boardregulatorEVMareusedtoprovideVDD,set
platform power switch S1 to on.
Platform LED2 lights, indicating the presence of VDD, and the evaluation
modules installed on the platform begin operation.
11) Adjust the signal source level as needed.

Quick Start List for Stand-Alone
2-4
Operation
2.3 Quick Start List for Stand-Alone
Follow these steps to use the TPA741 MSOP EVM stand-alone or when
connecting it into existing circuits or equipment. Connections to the TPA741
MSOP module header pins can be made via individual sockets,
wire-wrapping, or soldering to the pins, either on the top or the bottom of the
module circuit board. Numbered callouts for selected steps are shown in
Figure 2–2 and details appear in Chapter 3.
Figure 2–2. Quick Start Module Map
5
2
6
4
OUT+
IN–
IN+
VDD GND
U1 †
Shutdown
R5
OUT–
GND
C4
TEXAS
INSTRUMENTS
SLOP343
TPA741 MSOP EVM
C6
C5
S1 R1
+
R2
C2
C1
R3
R4
C3
†Due to the very small size of the MSOP IC package, the standard part number TPA741 is replaced with the code TIAJD.
Power supply
1) Ensure that all external power sources are set to off.
2) Connectanexternalregulatedpowersupply set to 5 V to the module VDD
and GND pins, taking care to observe marked polarity.
Inputs and outputs
3) Ensure that the signal source level is set to minimum.
4) ConnectthepositiveleadfromtheaudiosourcetothemoduleIN+pinand
the negative lead to the IN– pin.
5) Connect the shutdown S1 pin to VDD through a normally open switch.
6) Connect an 8-Ω–32-Ωspeaker to the module OUT+ and OUT– pins.
Power Up
7) Verify correct voltage and input polarity andset the external power supply
to ON.
The EVM begins operation.
8) Adjust the signal source level as needed.

References
2-5
Operation
2.4 References
2.4.1 TPA741 MSOP EVM Connected for BTL Output
Figure 2–3.TPA741 MSOP EVM Connected for Stereo BTL Output
Audio
Input
(Left)
External Mute
Control
(active high)
Right
5 VDC
Audio
Input
(Right)
5 VDC GND
Left
OUT+
IN–
IN+
VDD GND
U1 †
Shutdown
R5
OUT–
GND
C4
TEXAS
INSTRUMENTS
SLOP343
TPA741 MSOP EVM
C6
C5
S1 R1
+
R2
C2
C1
R3
R4
C3
OUT+
IN–
IN+
VDD GND
U1 †
Shutdown
R5
OUT–
GND
C4
TEXAS
INSTRUMENTS
SLOP343
TPA741 MSOP EVM
C6
C5
S1 R1
+
R2
C2
C1
R3
R4
C3
†Due to the very small size of the MSOP IC package, the standard part number TPA741 is replaced with the code TIAJD.

TPA741 MSOP Audio Power Amplifier Evaluation Module Parts List
2-6
Operation
2.4.2 TPA741 MSOP EVM Schematic Diagram
Figure 2–4.TPA741 MSOP EVM Schematic Diagram
C1
1 µF
C3
1 µF
R1
20 kΩ
Audio Input–
Shutdown S1
C6
5 pF
OUT–
GND
OUT+
R5
39 kΩ
R4
20 kΩ
NO
C4
10 µF
C5
1 µF
Shutdown
Bypass
In+
In–
VO–
GND
VDD
VO+
8
7
6
5
1
2
3
4
GND
VDD
2.5 V to 5.5 V
+
C2
1 µF
Audio Input+ R3
20 kΩ
R2
39 kΩ
2.4.3 TPA741 MSOP Audio Power Amplifier Evaluation Module Parts List
Table 2–3.TPA741 MSOP EVM Parts List
Reference Description Size Qty. Manufacturer/
Part Number Digi-Key Number
C4 Capacitor, 10 µF, 6.3 V A 1 Panasonic
ECS-TOJY106R Digi-Key PCS1106CT-ND
C1, C2,
C3, C5 Capacitor, 1 µF, 80%/–20%, nonpolarized 0603 4 Murata GRM39-Y5V105Z10PT
C6 Capacitor, pad only 0603 0
R1, R3, R4 Resistor, 20 kΩ, 1/16 W, 5% 0603 4 Panasonic
ERJ-3GSYJ203
R5, R2 Resistor, 39 kΩ, 1/16 W, 5% 0603 1 Panasonic
ERJ-3GSYJ393
S1 Switch, momentary 1 Panasonic
P8048SCT-ND Digi-Key P8048SCT-ND
Terminal post headers 9 Sullins
PTC36SABN Digi-Key S1022-36-ND
U1 IC, TPA741DGN†, audio
amplifier, 700 mW, mono MSOP-8 1 TI TPA741DGN
PCB1 PCB, TPA741 MSOP EVM 1
†Due to the very small size of the MSOP IC package, the standard part number TPA741 is replaced with the code TIAJD.
Note: All items are SMD except as noted.

TPA741 MSOP EVM PCB Layers
2-7
Operation
2.4.4 TPA741 MSOP EVM PCB Layers
Thefollowing illustrations depicttheTPA741EVMPCBlayersand silkscreen.
These drawings are not to scale. Gerber plots can be obtained from ant TI
sales office.
Figure 2–5.TPA741 EVM PCB
Figure 2–6.TPA741 EVM Silkscreen

TPA741 MSOP EVM PCB Layers
2-8
Operation
Figure 2–7.TPA741 EVM Top Layer
Figure 2–8.TPA741 EVM Bottom Layer