Thane Fitness H2O Vac Pro User manual

PB 1
Instruction Manual

2 3
Contents
Intended Use..................................................... 3
Safety Instructions ............................................ 3
Items Supplied................................................... 5
Device Overview................................................. 6
Before Initial Use ............................................... 6
Charging Up the Battery ................................. 7
Use ........................................................................ 7
After Use / Cleaning the Device
and Accessories................................................. 9
Technical Data .................................................. 10
Troubleshooting ................................................ 11
Disposal............................................................... 11
Thank you
We are delighted that you have chosen this H2O Vac™ Pro.
Before using the device for the first time, please read the instructions carefully
and keep them for future reference. If the device is given to someone else,
these instructions should also be handed over with it.
The manufacturer and importer do not accept any liability if the information in
these instructions is not complied with.
If you have any questions about the device and about spare parts/accessories,
contact the customer service department where you bought the device from.
Explanation of Symbols
Safety instructions:
Read through these
carefully and follow
them to prevent
personal injury and
damage to property.
Supplementary
information
Read operating
instructions before use!
Protection class II
Only use indoors!
Energy efficiency
level 5
Circuit symbol for DC
voltage
Circuit symbol for AC
voltage
Polarity of the barrel
connector
Intended Use
• The device is intended to be used for cleaning vertical, smooth, water-resistant
surfaces, e.g. windows, mirrors, tiles, and shower cubicles indoors.
• The device is not suitable for surfaces which are sensitive to moisture such
as wallpaper, textiles, glued objects, unsealed or waxed wooden surfaces,
soft plastic, leather etc.
• The device is not suitable for cleaning electronic equipment and fragile
objects.
• This device is not designed for sucking up dry dirt. It is not a hand-held
vacuum cleaner.
• The device is for personal use only and is not intended for commercial
applications.
• Use the device only as described in the instructions. Any other use is
deemed to be improper.
• The following are excluded from the warranty: all defects caused by improper
handling, damage, calcification or unauthorised attempts at repair. This
also applies to normal wear and tear.
Safety Instructions
• This device may be used by children aged 8 and over and by people with
reduced physical, sensory or mental abilities or a lack of experience and/
or knowledge if they are supervised or have received instruction on how to
use the device safely and have understood the dangers resulting from this.
Children must not play with the device. Cleaning and user maintenance
may not be performed by children, unless they are older than 8 years of
age and are supervised.
• Children younger than 8 years of age and animals must be kept away from
the device and the mains adapter. Improper use can lead to injuries and
electric shock.
• The device must always be switched off and disconnected from the mains
power when it is left unattended and before assembling, disassembling,
filling or emptying the water tank or cleaning the device.
• Use the battery only with the mains adapter supplied with it. Do not use the
mains adapter supplied with the device to charge up any other devices.
• Do not take the device apart and do not make any modifications to the
device. If the device or mains adapter is damaged, these parts must be
replaced by the manufacturer, customer service department or a similarly
qualified person (e.g. specialist workshop) in order to avoid any hazards.

4 5
• Keep children and animals away from the device and packaging material.
There is a risk of injury and suffocation!
• Do not use the device if it is damaged.
• If the battery has leaked, do not allow your skin, eyes and mucous membranes
to come into contact with the battery acid. If you touch battery acid, rinse
the affected sites with abundant fresh water immediately and contact a
doctor as soon as possible.
• Use and store the device only in closed rooms. Do not operate the device in
rooms with high humidity.
• Never touch the motor unit, the mains adapter or the mains cable with wet
hands.
• Keep the motor unit, the mains adapter and the mains cable away from
moisture or wet conditions!
• Connect the mains adapter only to a plug socket whose mains voltage
corresponds to the data on the rating plate. The plug socket must still be
accessible after the connection has been made. Only use suitable extension
cables whose technical data is the same as that of the mains adapter.
• Make sure that the mains cable is not squashed, bent or laid over sharp
edges and does not come into contact with hot surfaces. Do not wrap the
mains cable around the mains adapter.
• Remove the mains adapter from the plug socket in the event of a thunderstorm.
• When you pull it out of the plug socket, always pull on the mains adapter
and never the mains cable!
• Always check the device and accessories for damage before putting them
into operation. Do not use them if they are damaged!
• In the event of damage / faults (e.g. unusual noises, odour or smoke
development), or if the device has been dropped, switch off the device.
Have the device checked in a specialist workshop before using it again.
• Do not use the device in rooms containing easily ignitable, poisonous or
explosive substances.
• Do not operate the device on hot surfaces or close to a naked flame.
• Do not cover the device during operation in order to prevent the device
from overheating. Do not insert anything into the nozzle / ventilation openings
of the device and make sure that these do not become clogged.
Risk of Damage to Material and Property
• The device should only be used if it has been completely and correctly
assembled!
• Note the MAX marking on the dirty water tank. Do not overfill the dirty
water tank!
• Do not expose the device to extreme temperatures or wide temperature
variations.
• Do not drop the device or subject it to heavy impacts.
• Use only original spare parts from the manufacturer.
• Never place heavy objects on the device.
• Keep the device out of the reach of children and animals in a cool, dry
place which is protected from direct sunlight.
• Only ever pour conventional window cleaning agents into the fresh water
tank! Do not use any spirit or foam cleaning agents as they can interfere
with the way the device works.
• Do not pour boiling-hot water into the fresh water tank. The water must be
no hotter than 40°C.
• Never clean screens (televisions, computer monitors etc.) with the device.
Electrical devices of this type are not resistant to moisture.
Items Supplied
1. Cleaning cloth
2. Motor unit
3. Mains adapter with mains
cable
4. Measuring cup (50 ml)
5. Cleaning attachment
DANGER OF INJURY
DANGER OF ELECTRIC SHOCK
DANGER OF FIRE
1
2
3
4
5

6 7
Device Overview
6 Suction opening
7 On/Off switch
8 Spray Trigger
9 Handle
10 Charge control lamp
11 Mains adapter connecting socket
12 Ventilation openings
13 Blind hole (no function)
14 Spray nozzle
15 Sealing cap of the fresh water tank
16 Fresh water tank
17 Dirty water tank
18 Sealing cap of the dirty water tank
19 Base
20 Scraper lip
Before Initial Use
• Keep children and animals away from the packaging material. There is a
danger of suffocation, among other dangers!
1. Unpack all parts and check the items supplied for completeness (see the
“Items Supplied” chapter) and possible transport damage. If you find any
damage to the components, do not (!), use the device but contact our
customer service department.
2. Before using the device, remove all packaging materials and any labels that
may be on the device and are used for protection during transportation or
for advertising.
3. Fully charge up the battery (see the “Charging Up the Battery” chapter).
Charging Up the Battery
• Charge the battery only with the mains adapter (3) supplied with it. Do not
use the mains adapter (3) to charge up other batteries.
• The battery must not be taken apart, thrown into a fire, immersed in liquids
or short-circuited.
• It is essential that you charge up the battery fully (approx. 4 to 5 hours)
before you first use the device in order to achieve the maximum charging
capacity. If the battery is fully discharged during use, it must be fully charged
up again before it is next used.
1. First plug the barrel connector on the cable
of the mains adapter (3) into the connecting
socket (11) and then connect the mains
adapter (3) to an easily accessible
plug socket.
2. The charge control lamp (10) will turn red
indicating the battery is being charged.
3. After 4 to 5 hours, when the battery is fully charged, the charge control lampl
(10) will turn green. Disconnect the the mains adapter (3) from the mains
power and then disconnect the barrel connector from the motor unit (2).
Use
• The device should be positioned parallel to the window at 90 degrees,
using a vertical, top to bottom motion. You may use a horizontal motion at
90 degrees but do not turn the device upside down 180 degrees.
• Only ever pour conventional window cleaning agents into the fresh water
tank! Do not use any spirit or foam cleaning agents as they can interfere
with the way the device works.
• Do not pour boiling-hot water into the fresh water tank. The water must be
no hotter than 40°C.
• Do not open either of the two water tanks during use!
• Empty the dirty water tank after each use or when the MAX marking is
reached (see the “After Use / Cleaning the Device and Accessories”
chapter). IMPORTANT: Do not overfill the dirty water tank!
• Do not use the device when it is connected to the mains power supply.
CAUTION!
!
CAUTION!
!
CAUTION!
!
6
14
15
16
17
18
19
20
7
8
9
10
11
12
13

8 9
To prevent streaks from forming, do not
allow water residues to dry in the air.
Do not leave the suction function constantly
switched on so that the battery charge lasts
for as long as possible.
1. Disconnect the mains adapter (3) from
the device.
2. Push the cleaning attachment (5) as far as
it will go into the suction opening (6).
3. Attach the cleaning cloth (1) to the cleaning
attachment (5) using the Velcro fastener.
4. Fill the measuring cup (4) with water and a
little window cleaning agent if necessary.
5. Pull the sealing cap (15) out of the fresh
water tank (16).
6. Hold the device horizontally and pour the
liquid from the measuring cup (4) into the
opening of the fresh water tank (16).
CAUTION: Do not pour more than 50 ml
(one full measuring cup (4)) into the fresh
water tank (16).
7. Push the sealing cap (15) as far as it will go
into the opening of the fresh water tank
(16).
8. Spray the surface which is to be cleaned:
Hold the device vertically with the cleaning
attachment (5) at the top, direct the spray
nozzle (14) towards the surface and press
the Spray Trigger (8).
9. Turn the device around, spread the liquid
with the cleaning cloth (1) and dissolve
the dirt.
10. Turn the device around again and switch
on the suction function:
Press the On/Off switch (7).
11. Hold the device by the handle (9), place
the scraper lip (20) on the wet surface
and pull it up and down by applying gentle
pressure. Hold the device vertically and do
not press it on too firmly!
12. Once the MAX marking of the dirty water tank (17) has been reached,
switch off the device by pressing the On/Off switch (7) and empty the
dirty water tank (17) (see the “After Use / Cleaning the Device and
Accessories” chapter). Then continue cleaning.
• Charge up the battery when the performance of the device diminishes
(see the “Charging Up the Battery” chapter).
After Use / Cleaning the Device and Accessories
• Empty both water tanks after each use of the device to prevent deposits in
the water tanks and any damage to the device resulting from this!
• Never immerse the motor unit in water or other liquids to avoid an electric
shock!
• Do not use any sharp or abrasive cleaning agents or cleaning pads. These
could damage the surfaces.
1. Detach the cleaning cloth (1) from the cleaning attachment (5) and wash it
in accordance with the specifications on the washing label.
2. Empty the dirty water tank (17) and, if there is heavy soiling, rinse it out:
– Pull out its sealing cap (18) and allow all the remaining water to run into
a drain.
– Then reinsert the sealing cap (18).
3. Open the fresh water tank (16) and empty it completely.
4. Pull the cleaning attachment (5) off the motor unit (2), then rinse it using
clear water.
5. Wipe down the motor unit (2) if necessary with a soft, damp cloth and
then dry it with a soft cloth.
6. Allow all parts to dry in the air before storing away the device. Leave the
water tanks (16, 17) open to prevent mould from forming.
7. Charge up the battery after each use (see the “Charging Up the Battery”
chapter).
8. Store the device in a dry, cool indoor room out of the reach of children
and animals.

10 11
Technical Data
Device
Model number:
Voltage supply:
Motor power:
Capacity of fresh water tank:
Capacity of dirty water tank:
Battery charge time:
Battery operating time:
Mains adapter
Voltage supply:
Output:
C1
3.7 V DC, Li-ion battery 2000 mAh
10 W
65 ml
100 ml
approx. 4 – 5 hours;
approx. 30 minutes (with fully charged
battery)
100 – 240 V ~; 50 /60 Hz;
5 V 500 mA
Troubleshooting
If the device does not work properly, first check whether you are able to rectify
the problem yourself. Otherwise contact our customer service department.
Do not attempt to repair a defective electrical device yourself!
!
Problem Possible cause/solution
The device does not work. / Low
suction force
• Is the battery empty / too weak? Charge up the battery
Water runs along the surface. • The cleaning attachment (5) is being held at an angle
so that the dirty water cannot be sucked up.
• Too much pressure is being exerted on the cleaning
attachment (5).
Streaks when cleaning windows or
other smooth surfaces.
• Is the scraper lip (20) dirty? Clean the scraper lip (20).
• Is the scraper lip (20) worn?
– Turn over the scraper lip (20): Pull the scraper lip (20)
sideways out of its holder, moisten the rounded edge
with water or cleaning agent and slide back into the
holder the other way round.
– If after turning the scraper lip (20) over both edges
are worn, a new scraper lip (20) is required.
• Check the metering of the cleaning agent.
• If the cleaning cloth (1) is very dirty, take it off and rinse
it out under running water. Then reattach it to the
device and carry on cleaning.
The battery is not charging up. The
charge control lamp (10) does not
light up when the device is
connected to the mains power.
• Is the mains adapter (3) plugged correctly into the plug
socket and is the barrel connector plugged correctly
into the connecting socket (11)?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of the mains connection.
Disposal
The packaging material is recyclable. Dispose of the packaging in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for used
electrical and electronic devices. More information is available from your local authorities.
The rechargeable battery must be removed prior to disposal of the device and
disposed of separately from the device. To protect the environment, non-rechargeable
and rechargeable batteries may not be disposed of with normal household waste, but
must be taken to suitable collection points. Note the relevant statutory regulations
governing the disposal of batteries!

Distributed by:
Thane Canada Inc.
Mississauga ON L4W 5M6, Canada
www.thane.ca
Thane USA, Inc.
Canton OH 44718, U.S.A.
www.thane.com
Thane Direct UK Limited, Thanet House 231-232 Strand, London WC2R 1DA
www.thane.tv
Danoz Direct Pty Ltd.
Bondi Junction, NSW, 2022, Australia
www.danoz.com.au
OPERADORA AINOA SAPI DE CV
Av. Magnocentro No. 5 Piso 1 Centro Urbano Interlomas,
Municipio Huixquilucan de Degollado, Estado de México. C.P: 52760
www.mejorcompratv.com
TVNS Scandinavia AB
SE-211 74 Malmö, Sweden
www.tvins.com
© 2020 Thane IP Limited.
“Thane”, “H2O Vac™ Pro and related logos and variations are trademarks or
registered trademarks, in Canada and/or other countries, of Thane IP Limited
and/or its affiliated companies.
MADE IN CHINA
H2O Vac Pro MNL ENG R1 200917