The World Models Manufacturing Rambler EP User manual

ＲＡＭＢＬＥＲ ＥＰ
Wing Span 39.5 in/ 1000 mm
Wing Area
Flying Weight
Fuselage Length
22 oz/ 620 g
259 sq in/ 16.7 sq dm
31.5 in/ 805 mm
Specifications
15A speed controller and 7-8 cells 1000 mAh hump pack battery
Speed 400 motor
Requires :4-channel radio w/ 4 micro servos
INSTRUCTION MANUAL
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
*Specifications are subject to change without notice.*
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF) SERIES
MADE IN CHINA
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.1
ＲＡＭＢＬＥＲ ＥＰ
Apply thread locker
Apply epoxy glue.
Pierce the shaded portion
covering film.
Appl
(C.A.glue, super glue.)
y instant glue
Ensur
movement while assembling.
e smooth non-binding
Do not overlook this symbol !
P. 3 -9
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement. The
manufacturer will replace any defective parts, but will not extend to the parts that are good before
gluing to defective parts during assembly. Warranty will not cover any parts modified by customer.
IND EX
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P. 1
P. 2
P.9
BEFORE YOU BEGIN
Read through the manual before you begin, so you will have an overall idea of what to do.
Symbols used throughout this instruction manual comprise of the following : -
1
2
3
Assembl
sides the same way.
e left and right
Pee
covering film.
l off shaded portion
Drill holes with the specified
diameter (here:3mm).
Pay close attention here!
Cut off shaded portion.
Must be purchased separately !
Warning!
3mm
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.2
Parts List
COVERING:--
LIGHTEX SGX 196000 COVERING-RAMBLER EP
LIGHTEX SGX 100 WHITE
1. MAIN WING -- 1 pc.
2. PUSHROD Ø1.4x58mm w/ Threads (For Aileron) -- 2 pcs
FUEL TUBE Ø4x4mm -- 4 pcs
STRAPER -- 2 pcs
CLEVIS -- 2 pcs
HORN -- 2 pcs
SCREW PM2x16mm -- 4 pcs
3. FUSELAGE -- 1 pc.
STABILIZER & ELEVATOR -- 1 set
4. VERTICAL FIN & RUDDER -- 1 set
5. TAIL LANDING GEAR -- 1 set
6. PUSHROD Ø1.4x425mm w/ Threads (For Rudder) -- 1 pc.
CLEVIS -- 1 pc.
FUEL TUBE Ø4x4mm -- 1 pc.
HORN -- 1 set
SCREW PM2x8mm -- 2 pcs
7. PUSHROD Ø1.4x405mm w/ Threads (For Elevator) -- 1 pc.
CLEVIS -- 2 pcs
FUEL TUBE Ø4x4mm -- 1 pc.
HORN -- 1 pc.
SCREW PM2x8mm -- 2 pcs
8. SPEED 400 MOTOR -- 1 set
400 GEAR BOX -- 1 set
PROPELLER -- 1 pair
SPINNER Ø36mm -- 1 set
COWLING -- 1 pc.
SCREW PWA2x8mm -- 4 pcs
8A. M2 NUT -- 4 pcs
SCREW PM2x22mm -- 4 pcs
WASHER d2xD5mm -- 8 pcs
PLYWOOD (F1A) 3x53x54mm -- 1 pc.
PLYWOOD (F1B) 3x30x36mm -- 1 pc.
CARBON FIBER TUBE d3xD5x11mm -- 4 pcs
9. STRAPER -- 2 pcs
FUEL TUBE Ø4x4mm -- 2 pcs
SPONGE 10x50x150mm -- 1 pc.
BATTERY TIE 200mm -- 1 pc.
DOUBLE-SIDED TAPE 30x35mm -- 1 pc.
10. PLYWOOD 2x20x64mm (Wing Protection) -- 1 pc.
SCREW PM2.5x16mm -- 2 pcs
WASHER d2.5xD8mm -- 2 pcs
11. MAIN LANDING GEAR -- 1 set
LANDING WIRE STRAPS PL411030 -- 2 pcs
SCREW PA2.3x12mm -- 4 pcs
MAIN WHEEL Ø40mm -- 2 pcs
COLLAR Ø2.6mm w/ set screw -- 2 sets
12. CANOPY -- 1 pc.
SCREW PWA2x8mm -- 4 pcs
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.3
Aileron Servos
2
4
PM2x16mm Screw
Ø1mm pilot holes for World
Models tri-horn are pre-drilled.
Please look for pin-hole marks
at under side of control surfaces.
Bottom View
2mm
Main Wing
1
Apply instant type CA glue to both sides of each hinge.
Bottom View
Aileron Servo Lead
PM2x16mm
Pushrod
Ø1.4x58mm
Clevis
2mm
Horn
Fuel Tube
Ø4x4mm
straper
1mm
1mm
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

Stabilizer & Elevator
3
Apply instant type CA glue to both sides of each hinge.
Vertical Fin & Rudder
4
Apply instant type CA glue to both
sides of each hinge.
Completed
P.4
A=A
A
A
B=B'
BB
Completed
Tempora ry instal l the m ain wing, adjust
levelin g of th e stabili zer to make it as
paralle l to th e main wing as possible.
(Stabilizer)
(Main Wing)
B B'
B=B'
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

Tail Landing Gear
5
Rudder Pushrod
6
2
PM2 x 8mm Screw
1mm pilot holes for World Models tri-horn are pre-drilled. Please look
for pin-hole marks at under side of control surfaces.
Bottom View
PM2 x 8mm
Clevis
Fuel Tube
Ø4x4mm
2mm
Ø1.4x425mm
Bottom View
Elevator Pushrod
7
PM2 x 8mm Screw
1mm pilot holes for World Models tri-horn are pre-drilled. Please
look for pin-hole marks at under side of control surfaces.
2
Bottom View
Horn
Fuel Tube
Ø4x4mm
Clevis
PM 2x8mm
2mm
Ø1.4x405mm
Pushrod
P.5
Wooden Block
Wire Ø1x85mm
85mm
18mm
98mm 26mm
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

3
M2 Nut
PM2x12mm
d2xD5mm
Washer
P.6
Motor / Cowling
TO ALLOW FOR BACKLASH OF MATCHING GEAR, PUT A PIECE OF THIN PAPER
BETWEEN THE GEARS AND THEN TIGHTEN THE M2.6X7mm SCREWS. REMOVE
THE PAPER BEFORE FLYING.
8
Paper
8A
1
PM2x22mm Screw
4
d2xD5mm Washer
8
M2 Nut
4
4
d2xD5x11mm
Carbon Fiber Tube
1
2
F1B
Brushless motor
2
M2.6x7mm
Brushless motor / Cowling
PWA2x8mm Screw
4
2
1
3mm Set Screw
2
PA2.6x10mm Screw
M2 Nut
2
d2xD5mm Washer
2
PM2x12mm Screw
4
M2.6 x 7mm Sock Head Screw
3 4
54x53x3mm
F1A
PM2x22mm
M2 Nut
d2xD5mm
Washer
d2xD5mm
Washer
4
PM2x12mm
PM2x12mm
Completed
Spinner
PWA2x8mm
1.5mm
6
7
5
M3x3mm
Set Screw
Steel Wire
Ø1.2x35mm
This step is for Direct
Drive Brushless motor
set up. Please follow
step 8 for Geared
Speed 400 motor set up.
This step is for Geared Speed 400 motor set up. Please follow step 8A for
Direct Drive Brushless motor set up.
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.7
Main Wing
10
Main Landing gear
11
PM2.5x 16mm Screw
2
d2.5 x D8mm Washer
2
Wing Protection 2x20x64 mm
PM2.5x16mm d2.5 x D8mm
Washer
2.5mm
3mm Set Screw
2.6mm Collar
PA2.3x12mm Screw
4
2.6mm Collar
2
Radio Equipment
9
Double-Sided Tape
Battery Tie
15A Speed Controller
Speed 400 Motor
Battery
Elevator Pushrod
Rudder Pushrod
Straper
Rudder Servo
Elevator Servo
Sponge
Fuel Tube Ø4x4mm
PA2.3x12mm Landing
wire straps
1.5mm
56.2mm
48mm
2.5mm
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.8
Canopy
12
A =A ' B =B ' C =C '
BB '
CC '
A A '
Wing Setting
13
PWA2 x 8mm Screw
4
PWA2 x 8mm
1mm
Pilot
Adjust the wing and fuselage configuration as shown in the diagrams.
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.9
Adjust the control throws as shown in the
diagram. These throws are good for general
flying. You can adjust according to your
personal preference.
Elevator
Important Safety Precautions
#First time flyer should never fly by himself/herself. Assistance from experienced flyer is
absolutely necessary.
#Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
# is specially designed to be powered by geared speed
motor.
#Make sure the air field is spacious, never fly the plane too close to people and never get
too close to a running propeller.
#If you find wrinkles on the covering as a result of weather changes, you can use hot iron
to remove the wrinkles. Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone. Too hot an iron may damage the covering.
#Check and re-tighten up all factory assembled screws, use thread locker if applicable.
400
Warning!
Control Throws
Rudder
20mm
20mm
10mm
14
Aileron
8mm
C.G.
15
The ideal C.G. position is 58mm (2.28 in.) behind
the leading edge measured at where the wing
meets the fuselage. In order to obtain the C.G.
specified, add weight to the fuselage or move
the battery position. Check the C.G. before
flying.
58mm
C.G.
2.28in.
ＲＡＭＢＬＥＲ ＥＰ
8mm
10mm
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

E196PO11180902
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
AirBorne Models, 4749-K, Bennett Drive, Livermore, CA 94551 USA.
1. Name:
2. Address:
3. Phone #: E-mail:
4. Model:
Wing QC# Fuselage QC#
(QC numbers are stamped on wing and fuselage)
5. Date of Purchase:
6. Store Name:
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

The World Models
Manufacturing Co., LTD.
www .theworl dmode ls.com
E196PO11180902
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m