Therabody THERAGUNmini User manual

See warnings insert for important
safety instructions
LED battery indicator light
Ergonomic grip
Multi-functional power/ speed button
LED speed indicator
Charging port
Interchangeable attachment connector
The Theragun mini™
Using the Theragun mini
1. To turn on the Theragun mini, rmly press and hold the multi-functional power/
speed button on the right side of the device.
2. Float the device across areas in need of treatment, gradually applying light to
moderate pressure as needed.
3. Press the power/speed button again to toggle between 3 speeds.
4. To turn o the Theragun mini, rmly press and hold the power/speed button until
the device shuts o.

Align the attachment with the tip of the rotating arm
and push to connect. To remove, grip the attachment,
placing 1 nger on each side of the plastic connector.
Pull o the attachment.
Your Theragun mini comes with a Standard Ball
attachment designed for overall use. It is also
compatible with all available attachments, excluding
those exclusive to the rst-generation Theragun liv.
Connecting the attachment
Charging the Theragun mini
1. After turning o the device, plug the power adapter into the charging port of
the Theragun mini.
2. The LED light on the power/speed button will flash until fully charged.
3. Charging is complete when the LED light on the power/speed button is solid
green.
4. Battery level is continuously displayed on the LED light of the power/speed
button when the device is on. To view battery level when the device is o, briefly
press the power/speed button and the LED battery light will flash to indicate
the battery level.

Battery level on the
Theragun mini is indicated
with the following colors:
Battery Level Flashing red: Low charge
Flashing blue: Half-way charged
Flashing green: High charge
Solid green: Fully charged
Cleaning the Theragun mini
For the most hygienic Theragun device experience, sanitize it after each use by:
1. Wiping the device with a disinfectant wipe to remove any residue.
2. Once the device is residue-free, use a new wipe to disinfect the surface area
by wiping all sides in a downward motion.