Thetford 23709 Setup guide

08/05/2006Date:
Tools required:
V1Version:
Description: C200S CS Electric Valve
Part number: 23709
Look for Service Centers, Point of Sale addresses and other
information on: www.thetford-europe.com
A
B
Repair instruction
Pull the waste tank out of
the Cassette toilet by lifting
up the yellow clip.
Inside view, part is
assembled with 4 screws
(2 in front, 2 at the back).
C200S/CS toilet.
Remove the two bowl
retainers.
C
This bracket
is 3x assembled around the
toilet bowl. Each bracket
has two screws.
1.
2.
3. 1.
08/05/2006 Description: C200S CS
Electric Valve 1

D
For bracket nr. 3, we
advise you to use a mirror
as the bracket is very
difficult to see.
2. 3.
Electric valve
Vacuum
breaker
1.
1. 2.
3.
Hose barb
E
When all the parts are
unscrewed, the toilet bowl
can be taken off.
F
G
H
Looking into the toilet
bowl, the electric valve
can be found.
By taking out the vacuum
breaker it is easier to
replace the electric valve.
Press against upstanding
rib (1) and the part
can be taken out.
Remove the flush tube
including electric valve.
Make the electric valve on
both sides loose from the
tubes and, pull both
connectors loose. 1. Can
be pulled off 2. Unscrew
the hose barb 3. Can be
pulled off
08/05/2006 Description: C200S CS
Electric Valve 2

3.
I
Replace the electric
valve.
1. 2.
3.
J
K
Opening
1.
2.
Place vacuum breaker back into
position the following way.
Place complete water tube back
into the toilet bowl.
L
Replace the three brackets.
1.
2.
3.
M
place toilet bowl back in
position.
08/05/2006 Description: C200S CS
Electric Valve 3

3.
N
Replace the two bowl
retainers.
Note : Bracket with the
magnet in it, has to be
placed in the front.
+ magnet
O
Place waste tank back
into the toilet.
08/05/2006 Description: C200S CS
Electric Valve 4