Thetford C260 Cassette Toilet User manual

C
CC
C260
260260
260 INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTIONINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTIONS
SS
S
A
AA
Available
vailablevailable
vailable in
in in
in EN
ENEN
EN /
/ /
/ FR
FRFR
FR /
/ /
/ NL
NLNL
NL /
/ /
/ DE
DEDE
DE /
/ /
/ IT
ITIT
IT /
/ /
/ ES
ESES
ES /
/ /
/ S
SS
SV
VV
V /
/ /
/ S
SS
SL
LL
L

2
CONTENTS
CONTENTS ..................................................................................................................................................... 2
GENERAL ....................................................................................................................................................... 3
1INTRODUCTION ............................................................................................................................................ 3
2STANDARDS / LEGISLATION ........................................................................................................................ 4
3CUSTO ER SERVICE .................................................................................................................................... 4
C262CWE ...................................................................................................................................................... 5
4INTERFACES ................................................................................................................................................. 5
5UNPACKING INSTRUCTIONS ........................................................................................................................ 9
C263S ......................................................................................................................................................... 10
6INTERFACES .............................................................................................................................................. 10
7UNPACKING INSTRUCTIONS ..................................................................................................................... 15
C263CS ....................................................................................................................................................... 16
8INTERFACES .............................................................................................................................................. 16
9UNPACKING INSTRUCTIONS ..................................................................................................................... 21
C263CSL ..................................................................................................................................................... 22
10 INTERFACES .............................................................................................................................................. 22
OPTIONS ...................................................................................................................................................... 27
11 CERA IC BOWL ........................................................................................................................................ 27
12 PLENU .................................................................................................................................................... 28
13 PASSIVE OUTSIDE VENT ........................................................................................................................... 29
14 POWERED OUTSIDE VENT ........................................................................................................................ 30
15 WASTE PU P-OUT SYSTE ...................................................................................................................... 31
CONTACT ..................................................................................................................................................... 33

3
GENERAL
GENERAL
1
11
1INTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
These installation instructions provide you with the necessary information to install the Thetford C260 Cassette
Toilet. Thetford also provides 2D-drawings and 3D-files for further reference.
1.1
1.11.1
1.1 Symbols used
Symbols usedSymbols used
Symbols used
OK
Not OK
Tip
Special attention required
Caution (possible risk of injury or product damage)
1.2
1.21.2
1.2 Toilet designation
Toilet designationToilet designation
Toilet designation
Each toilet has a specific identification code, the toilet designation. The different positions stand for different
variations of the toilet. In these instructions, the designation will be used as reference.
Designation example
C263CS – N062X40L01
C26
3
33
3 CS
CSCS
CS
– N 062
X
XX
X
40
L
LL
L
01
Type of
water
supply
Type of
console
Slide out
direction waste-
holding tank
Type of level
indication
1.3
1.31.3
1.3 Overview
Overview Overview
Overview C
CC
C26
2626
260
00
0 versions
versionsversions
versions
The C260
has 4 main versions:
C263CWE
C263CWEC263CWE
C263CWE - x xxx x xx x xx
C263
C263C263
C263S
SS
S - x xxx x xx x xx
C263
C263C263
C263CS
CSCS
CS - x xxx x xx x xx
C263
C263C263
C263CSL
CSLCSL
CSL - x xxx x xx x xx (= C263 low console)
C262CWE
C262CWEC262CWE
C262CWE
C263S
C263SC263S
C263S
C263CS
C263CSC263CS
C263CS
C263CS
C263CSC263CS
C263CS
L
LL
L
Capacity waste
-
holding tank 17,5L 17,5L 17,5L 17,5L
Capacity flush
-
water
tank 8L N.A. N.A N.A
Level indication
waste-holding tank 1 level 1 level 1 level 1 level
Level indication
flush-water tank N.A N.A N.A N.A

4
GENERAL
1.4
1.41.4
1.4 Available drawings and models
Available drawings and modelsAvailable drawings and models
Available drawings and models
Designation
Description
2D drawing
3D
file
C262CWE
–
x 062 x 40 x xx /
C262CWE – x 030 x 40 x xx
C262CWE with standard bowl
LE
900
LE
900
C263S
–
x 062 x 40 x xx /
C263S – x 030 x 40 x xx
C263S with standard bowl
LE
901
LE
901
C263CS
–
x 062 x 40 x xx /
C263CS – x 030 x 40 x xx
C263CS with standard bowl
LE
902
LE
902
C263CSL
–
x 062 x 40
x xx /
C263CSL – x 030 x 40 x xx
C263CS low with standard bowl
LE
903
LE
903
C262CWE
–
x 062 x 50 x xx
C262CWE with ceramic bowl
LE
904
LE
904
C26
3S
–
x 062 x
5
0 x xx
C263S with ceramic bowl
LE
905
LE
905
C263CS
–
x 062 x 50 x xx
C263CS with ceramic bow
l
LE
906
LE
906
C263CSL
–
x 062 x 50 x xx
C263CS low with ceramic bowl
LE
907
LE
907
C263S
–
x 062 x 40 x 04 /
C263S – x 030 x 40 x 04
C263S with standard bowl and waste
pump-out system
LE908
LE908
C263S
–
x 062 x 50 x 04
C263S with ceramic bowl and waste
pump-out system
LE909
LE909
Not applicable
Waste pump
-
out system
LE910
LE910
Not applicable
Powered outside vent
LE911
LE911
Not applicable
Waste
-
holding tank
LE912
LE912
Not applicable
Waste
-
holding tank with waste pump
-
out system
LE
913
LE
913
2
22
2STAND
STANDSTAND
STANDARDS / LEGISLATION
ARDS / LEGISLATIONARDS / LEGISLATION
ARDS / LEGISLATION
BSI 2081
-
2 1998
Closets for use with chemicals
Directive 72/245/EEC, as last amended by Directive
2004/104/EC and 2005/83/EG.
CE
3
33
3CUSTO ER SERVICE
CUSTO ER SERVICECUSTO ER SERVICE
CUSTO ER SERVICE
3.1
3.13.1
3.1 Installation audit form
Installation audit formInstallation audit form
Installation audit form
Thetford offers an additional service by auditing the installation of our products at the manufacturer. This means that
before a C260 is installed in production series, our local service representative will carry out a specific audit based on
these Thetford installation instructions. The outcome of this audit will be shared and agreed to with the individual
manufacturer.
The audit is meant as a reference for the specific toilet model (C260) to ensure correct installation for the complete
production series.
In any case, the manufacturer can always contact the local service representative for any additional support related
to the installation of the C260 toilet.
3.2
3.23.2
3.2 Serviceability
ServiceabilityServiceability
Serviceability
The manufacturer is responsible for correct installation to ensure the right functionality and serviceability of the
C260. In terms of serviceability, this means that a dealer or an authorised Thetford service partner must be able to
de-install and re-install the C260 within 45 minutes, using standard tools and equipment.
This is to claim any warranty during the period of 3 years after purchase date. The serviceability of the toilet is also
included in the audit. In case of any queries on this subject, please contact your local service representative before
installing our product.

5
C262CWE
C262CWE
4
44
4INTERFACES
INTERFACESINTERFACES
INTERFACES
4.1
4.14.1
4.1 Bathroom requirements
Bathroom requirementsBathroom requirements
Bathroom requirements
ain dimensions bathro
om
Other dimensions
Rotation Bowl

6
C262CWE
Floor
The C
260
must be
screwed
to
a flat and stable floor
Angle back wall
-
floor
4.2
4.24.2
4.2 Floor connection
Floor connectionFloor connection
Floor connection
ount the toilet to the floor with four screws.
Screw type
Screws are supplied by Thetford
S
crew positions
See
the
installation drawing
of the
applicable toilet (1.4)
Required torque
1
.
2 ± 0.3
Nm
for a Plywood floor
Torque may differ if the floor is made from a different material.
4.3
4.34.3
4.3 Water fill door
Water fill doorWater fill door
Water fill door
First c
onnect the toilet to the floor a
nd then
install
the waterfill door
. Install the waterfill door
with four screws. For further instructions see the installation instructions of the door.
Extra cut
-
out
outside
wall
A cut
-
out need
s
to be created in the
outside
wall for
the
waterfill door
.
Dimensions cut
-
out
See
the
installation drawing of
the
applicable toilet (1.4)
Screw type
Screws are supplied by Thetford
Required torque
0.5 Nm

7
C262CWE
4.4
4.44.4
4.4 Service door
Service doorService door
Service door
Door 3
Door 3Door 3
Door 3
Flush door 3
Flush door 3Flush door 3
Flush door 3
ounting position
See
the
installation drawing of
the
applicable toilet (1.4)
See
the
installation drawing of
the
applicable toilet (1.4)
Cut
-
out dimensions
See
the
installation drawing of
the
applicable toilet (1.4)
See
the
installation drawing of
the
applicable toilet (1.4)
Wall thickness
23
–
39 mm
23
–
39 mm
Ins
tallation
See
the
installation instruction of
the
door
See
the
installation instruction of
the
door
4.5
4.54.5
4.5 Shower tray
Shower trayShower tray
Shower tray
Available space for shower tray
Interfaces
See
the
installation drawing of
the
applicable toilet (1.4)
4.6
4.64.6
4.6 Cosmetic w
Cosmetic wCosmetic w
Cosmetic wall s
all sall s
all seal
ealeal
eal
The wall seal is
integrated with the toilet.
Pay close attention to the position of the wall seal!

8
C262CWE
4.7
4.74.7
4.7 Power supply
Power supplyPower supply
Power supply
Position
Operating voltage
10
–
15 V
(power supply must be able to deliver 3 ampere
s
at
rated voltage)
T
he voltage must be between
11
.
4
and
13
.
8
V to be able to
achieve full bowl coverage flush.
Wiring diagram
Connection
2 pole tab housing
Position wiring in tab housing
2 pole connector
on toilet
TYCO/A P 180
908
2 pole
connector
OE
TYCO/A P 180907
Thickness
0
.
5 mm²
4.8
4.84.8
4.8 Packag
PackagPackag
Packaging
inging
ing
Type of packaging
Pallet packaging (see chapter 5 for unpacking)
Amount of toilets on a pallet
6 (2x3)
aximum stack height
3 pallets high
Pallet size
1200 x 800 mm
Returnable packaging
The pallet must be returned to Thetford if a half truck load i
s
available.
red
black

9
C262CWE
5
55
5UNPACKING
UNPACKINGUNPACKING
UNPACKING INSTRUCTION
INSTRUCTIONINSTRUCTION
INSTRUCTIONS
SS
S
1
11
1
2
22
2
3
33
3
4
44
4
5
55
5
6
66
6
7
77
7
8
88
8

10
C263S
C263S
6
66
6INTERFACES
INTERFACESINTERFACES
INTERFACES
6.1
6.16.1
6.1 Bathroom requirements
Bathroom requirements Bathroom requirements
Bathroom requirements
ain dimensions bathroom
Other dimensions
Rotation Bowl

11
C263S
Floor
The C260 must be screwed to a flat and stable floor
A
ngle back wall
-
floor
6.2
6.26.2
6.2 Floor connection
Floor connectionFloor connection
Floor connection
ount the toilet to the floor with four screws.
Screw type
Screws are supplied by Thetford
Screw positions
See the installation drawing of the applicable toilet (1.4)
Required torque
1.2 ± 0.3 Nm for a Plywo
od floor
Torque may differ if the floor is made from a different material.
6.3
6.36.3
6.3 Wall connection
Wall connectionWall connection
Wall connection
First connect the toilet to the floor and then to the inside wall.
Connect the toilet to the wall with three screws.
Screw positions
See
the
installation d
rawing of
the
applicable toilet (
1.4)
Required torque
0.9 Nm

12
C263S
6.4
6.46.4
6.4 Service door
Service doorService door
Service door
Door 3
Door 3Door 3
Door 3
Flush door 3
Flush door 3Flush door 3
Flush door 3
ounting position
See
the
installation drawing
of the
applicable toilet (1.4)
See
the
installation drawing of
the
applicable toilet (1.4)
Cut
-
out dime
nsions
See
the
installation drawing of
the
applicable toilet (1.4)
See
the
installation drawing of
the
applicable toilet (1.4)
Wall thickness
23
–
39 mm
23
–
39 mm
Installation
See
the
installation instruction
s
of
the
door
See
the
installation instruct
ion
s
of
the
door
6.5
6.56.5
6.5 Shower tray
Shower trayShower tray
Shower tray
Available space for shower tray
Interfaces
See
the
installation drawing of
the
applicable toilet (
1.4)

13
C263S
6.6
6.66.6
6.6 Water hose
Water hoseWater hose
Water hose
ake sure that after routing the water hose the waste
-
holding tank still can be removed from the toile
t.
Diameter
Inside:
Outside:
10
mm
16 mm
Length
+ Position
740
mm
from the back of the toilet
Required pressure remote
pump at the toilet inlet
in
.
0.35
b
ar at 4.2
L/min
ax. 0.70 bar at 7.1 L/min
Please meet these requirements to ensure co
rrect flush
.
6.7
6.76.7
6.7 Cosmetic w
Cosmetic wCosmetic w
Cosmetic wall seal
all sealall seal
all seal
The wall seal is integrated with the toilet.
Pay close attention to the position of the wall seal!

14
C263S
6.8
6.86.8
6.8 Power supply
Power supplyPower supply
Power supply
Position
Wiring diagram
Remote pump
Grey and purple are used for remote pump
relais
.
inimum voltage and
wattage as indicated on the pump must be respected
Connection
4 pole tab housing
4 pole connector on toilet
TYCO/A P 180901
4 pole
connector
OE
TYCO/A P
180900
Thickness
0
.
5 mm²
6.9
6.96.9
6.9 Packaging
PackagingPackaging
Packaging
Type of packaging
Pallet pac
kaging (see chapter 7 for unpacking instructions)
Amount of toilets on a pallet
8
(2
x
4
)
aximum stack height
3 pallets high
Pallet size
1200 x 800 mm
Returnable packaging
The pallet must be returned to Thetford if a half truck load is available.
red
grey purple
black

15
C263S
7
77
7U
UU
UNPACKING
NPACKINGNPACKING
NPACKING INSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
1
11
1
2
22
2
3
33
3
4
44
4
5
55
5
6
66
6

16
C263CS
C263CS
8
88
8INTERFACES
INTERFACESINTERFACES
INTERFACES
8.1
8.18.1
8.1 Bathroom requirements
Bathroom requirements Bathroom requirements
Bathroom requirements
ain dimensions bathroom
Other dimensions
Rotation Bowl

17
C263CS
Floor
The C260 must be screwed to a flat and stable floor
Angle back wall
-
floor
8.2
8.28.2
8.2 Fl
FlFl
Floor connection
oor connectionoor connection
oor connection
ount the toilet to the floor with four screws.
Screw type
Screws are supplied by Thetford
Screw positions
See the installation drawing of the applicable toilet (1.4)
Required torque
1.2 ± 0.3 Nm for a Plywood floor
Torque may differ if the floor is made from a different material.
8.3
8.38.3
8.3 Wall connection
Wall connectionWall connection
Wall connection
This toilet is mounted to the outside wall with a wall bracket.
Install the wall bracket with two screws to the outside wall.
Screw positions
See
the
installation drawing of
the
applicab
le toilet (
1.4)
Required torque
0.
5
Nm

18
C263CS
8.4
8.48.4
8.4 Service door
Service doorService door
Service door
Door 3
Door 3Door 3
Door 3
Flush door 3
Flush door 3Flush door 3
Flush door 3
ounting position
See
the
installation drawing of
the
applicable toilet (1.4)
See
the
installation drawing of
the
applicable toilet (1.4)
Cut
-
out dimensions
See
the
insta
llation drawing of
the
applicable toilet (1.4)
See
the
installation drawing of
the
applicable toilet (1.4)
Wall thickness
23
–
39 mm
23
–
39 mm
Installation
See
the
installation instruction
s
of
the
door
See
the
installation instruction
s
of
the
door
8.5
8.58.5
8.5 Sh
ShSh
Shower tray
ower trayower tray
ower tray
Available space for shower tray
Interfaces
See
the
installation drawing of
the
applicable toilet (1.4)

19
C263CS
8.6
8.68.6
8.6 Water hose
Water hoseWater hose
Water hose
The water
hose is led through the hole in the splashguard. From there the water hose can be freely routed to the
left or right underneath the toilet.
Diameter
Inside:
Outside:
10
mm
16 mm
Length + Position
500
mm from the splashguard
If necessary remove a part of the
splashguard.
Required pressure remote
pump at the toilet inlet
in. 0.35 bar at 4.2
L/min
ax. 0.70 bar at 7.1 L/min
Please meet these requirements to ensure a correct flush
.
8.7
8.78.7
8.7 Cosmetic w
Cosmetic wCosmetic w
Cosmetic wall seal
all sealall seal
all seal
The wall seal is integrated with the toilet.
Pay close attention to the position of the wall seal!

20
C263CS
8.8
8.88.8
8.8 Power supply
Power supplyPower supply
Power supply
Position
Wiring diagram
Remote pump
Grey and purple are used for remote pump
relais
. inimum voltage
and wattage as indicated on the pump must be respected
Connection
4 pole tab housing
4 pole connector on toilet
TYCO/A P 180901
4 pole connector OE
TYCO/A P 18090
0
Thickness
0
.
5 mm²
8.9
8.98.9
8.9 Packaging
PackagingPackaging
Packaging
Type of packaging
Pallet packaging (see chapter 9 for unpacking instructions)
Amount of toilets on a pallet
6 (2
x
3)
aximum stack height
3 pallets high
Pallet size
1200 x 800 mm
Returnable packaging
The pallet must be
returned to Thetford if a half truck load is available.
red
grey purple
black