Thinkrace FA23 User manual

FA23 User Manual
Please read the instruction manual before using, in order to install SIM card
properly and use the product easily.
1.How to use:
1. Please check the ID number of this product in the label of external box; find out all

accessories inside the box.
2. Before power on: please insert GSM network Micro SIM card (Which can support
one of the network modes: GSM 850,900,1800,1900MHZ, order the caller ID function and
order monthly mobile internet traffic data from your mobile operators (it must be GPRS
traffic, not less than 30 MB/month traffic package). Please note that this product only
supports GPRS internet. There must be GPRS traffic available in the SIM card. This
locator doesn't support 3G and 4G.
3. Power on: press the power button for 3 seconds or more until power on.
4. Power off:
By the GPS watch: (option1) without sim card: long press the power button above 3
seconds to power off.
(Option2) with sim card: short time press the power button 10 times to power off
ByAPP: entering Settings—— Remote shutdown.
5.How to charge: Put the magnetic absorbed charging head on back of the GPS watch,
connect the phone charger (5V 1Aoutput) to charge. Please don't use 5V 2A charger.
2. SIM card installation method

Chip up insert the mobile phone card
3. Equipment parameters
Positioning: GPS satellite positioning + AGPS auxiliary positioning+WIFI positioning+LBS
base station positioning
Device dimension：45X39X15mm Gross weight：44g

Battery capacity: 450mAh
Monitoring Platform: supportAndroid phone, apple mobile phone system, computer
webpage login, etc.
4.Product function
1.Real time tracking
2.Call function
3.Historical route query
4.Geo-fence
5.Voice monitoring (this function is optional, please check with reseller in advance)
6.Do not disturb mode
7.Tone Mode
8.Clock Alarm
9.Voice Talk
10.Health Step
11.Make friend(this function is optional, please check with reseller in advance)
12.Time and Date format settings
13.Adjust Screen Brightness

14.Other settings and functions
5. Function declaration
5.1 Real time tracking
There are three kinds of tracking mode. User can select setting in theAPP to choose the
working mode.
1. Rapid positioning (1 minute): equipment at 1 minute intervals to automatically
update location information, we don’t suggest choosing rapid positioning model,
because the battery will be draining too fast obviously. We don’t suggest selecting
this one.
2. Standard positioning (10 minutes): equipment updates location information
according to the time of 10 minutes interval automatically. We suggest selecting this
one.
3. Power saving positioning (an hour): equipment in one hour a time to update
location information automatically, the power-saving mode use battery very few. This one
is good for power saving. We also suggest to choose this mode if you want a longer
battery life, but choosing this mode, you can still manually require a real-time positioning
report from the GPS tracker at any time.
4. Maximum power saving mode: This mode can be set in the setting menu of the
APP. The device will not automatically update location information at this mode. The
device battery power consumes very slow in this mode. However you can still manually
require a real-time positioning report from the GPS tracker at any time you want. The
Geo-fence function may not work properly at this mode.

5.2 Call function
Please set admin number (monitoring number) before the following operations
1.Phonebook：Click APP setting—Phonebook—Setting name, phone numbers（Maximum
20 contact numbers can be set in the phonebook；After setting up phonebook, can check
it from watch by sliding the screen of watch
2.SOS emergency call
If you have set up the emergency number (SOS number, maximum two), the
GPS watch will dial the emergency number when long press power/ SOS button, If
the first number answers, it will not dial the second number. If the first emergency
number does not answer, it will dial the second number automatically, the GPS
watch will stop dialing after circularly dial twice.
Note: After ordering the caller ID function, if admin number or phone book or any of
the emergency numbers are set, the watch will refuse calling from the stranger
number automatically. Phonebook and Emergency number can be set in completed
phone number or short number. When there is SOS call from GPS watch, if the first
mobile phone number answers the call by leaving voice message, the watch will not
dial the next SOS number.
5.3 Historical route query
This product will keep 3 months of historical route information. If two GPS positioning
points are very close to each other in the historical route data, the redundant one will be
deleted automatically.

5.4 Geo-fence
APP Geo fence—click upper- right “+”—Move circular area on map( Android phone
can set circle radius by upper “ +” and “-”, IOS can set Geo fence by moving upper
icon)—Mark Geo fence name( such as family or school)—Save.(suggesting the Minimum
radius 500m)
If the watch is out from fences, mobile phone APP client-side will receive alarm
message from GPS locator platform.Alarm information frequency is related to the
positioning interval time setting, the shorter positioning time interval, the more frequent to
detect if out of Geo-fence or not. It is not suggested to choose maximum power saving
mode if you need Geo-fence function.
5.5 Voice monitoring(this function is optional, please check with
reseller in advance)
APP settings—voice monitoring—fill in monitoring mobile phone number—click
ok(wait for a while and then the equipment will dial your mobile phone number; you can
listen to the voice around locator after pick up your mobile phone).
5.6 Do not disturb mode
APP settings—do not disturb mode—set up do not disturb timing(Maximum four
groups timing) within the time interval, unable to call the locating watch, unable to slip the
screen.
Do not disturb mode setting is only available from Monday to Friday. The “do not disturb”
function does not work at weekends.

5.7 Call Alert Setting.
APP: Settings -> CallAlert -> Ring down/Mute
5.8 Clock Alarm
APP: settings—Clock Alarm—set clock alarm time (Alarm clock reminder can be
one time, daily and user-defined, can be set according to your own needs)
5.9 Voice Talk
Intercom between gps watch and app for voice conversations:
1- Send voice message or text fromAPP to GPS watch: APP voice—hold the button to
talk—release the button to send; Or send text. (Note: the maximum voice message can
be up to 15 seconds. User can swipe up finger to cancel voice recording.
2- Send voice message from GPS watch to APP: click Talk icon—hold to talk—release
to send.
5.10 Health Step
How to use health step:
Step counting is default to be closed, so you need to manually turn on this function, by
following steps in APP:
From APP: Health Step—The upper- right corner setting icon—according to your need to
set time period of counting (three groups), pace and weight parameters, finally turn on the
step counter switch. You can turn off the counting function when it is not needed.

You can check the steps number in the GPS watch “step “; Can check the number of
calories and steps number of the day or historical sport route in the APP .
5.11 Making friends (this function is optional, please check with reseller in advance)
From watch: Click on "Make friend" interface of watch, on this interface, you can make
friend with other watches that is not friends, after success of making friends, icon will be
lighted up , each watch just can make one friend. Make new friend, then it will delete the
old friend automatically.
Voice talk with friend:After making friends successfully, click friend icon, long press it,
then can send voice message to friends.
5.12 Time and Date format settings
Time and Date showing format on watch setting:
APP settings- Time format setting- 12 hour/24hour-OK.
Date format settings: APP settings- Date format- DD.MM.YYYY or MM.DD.YYYY.or
DD.MM.YYYY- Ok.
5.13 Adjust Screen Brightness
APP settings-Brightness- Brightness1/Brightness3/Brightness5
(1 means Darkest, 3 means brightest), reboot the watch after setting.
5.14 Other settings and functions
The watch also has many other features, user can operate and use by mobileAPP.

4. App installation
6.1 Scan the following QR code to download software APP “Amber360” for cell phone.
APP for Android system APP for IOS system
6.2 Backend Website：http://www.amber360.com/
6.3 For Android,
You can download the app from "Google play" by searching " Amber360"
For IPhone,
You can download the app from "app store" by searching " Amber360"
Note: during the APP installation process, it will ask you whether to trust this
program, or whether to allow access to mobile phone location, please choose
trust or allow.
7. Setup APN for access of network
SIM card in some countries needs to setupAPN before access to GPRS network, please
contact your SIM card operator or check the website of the SIM card for theAPN
information.