thomann stairville dj lase performance 150 RGY User manual

DJ Lase Performance
150 RGY / 250 RVP /
200 GVC
showlaser
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
21.03.2016, ID: 255905 (V2)

Table of contents
1 General notes............................................................................................................................................... 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 18
4 Installation.................................................................................................................................................. 19
5 Starting up.................................................................................................................................................. 24
6 Connections and controls................................................................................................................... 27
7 Operation.................................................................................................................................................... 32
7.1 Starting up the device.................................................................................................................... 32
7.2 Main menu.......................................................................................................................................... 33
7.3 Stop the device................................................................................................................................. 36
7.4 Menu diagram................................................................................................................................... 37
7.5 Functions in DMX mode ............................................................................................................... 38
Table of contents
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
3

7.6 Pattern list........................................................................................................................................... 49
8 Technical specifications....................................................................................................................... 51
9 Plug and connection assignments.................................................................................................. 53
10 Troubleshooting...................................................................................................................................... 54
11 Cleaning....................................................................................................................................................... 56
12 Protecting the environment.............................................................................................................. 57
Table of contents
showlaser
4

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
5

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
showlaser
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
Letterings
Displays
General notes
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
7

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch off the device.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General notes
showlaser
8

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – laser radiation.
General notes
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
9

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
showlaser
10

2 Safety instructions
This device is intended to be used for the projection of laser light effects. It has been designed
exclusively for show applications. Use the device only as described in this user manual. Any
other use or use under other operating conditions is considered to be improper and may result
in personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
11

Laser safety requirements are based on DIN EN 60825-1:2015. The corresponding accident pre‐
vention regulation of the Accident Prevention and Insurance Association in Germany is BGV-
B2.
This device contains a class-3B laser. It comes equipped with a safety key and a jack for con‐
necting an external safety switch. Always remove the key when the device is not attended by a
trained operator.
As an operator you are responsible for the safety of all persons present. Familiarize yourself
with the laser safety regulations that apply in your country. To ensure safe operation, it is
important to pay attention to the following instructions.
Prior to commissioning, the company/operator must appoint a qualified person as laser pro‐
tection officer in writing and notify the operation of the laser equipment to the Accident Pre‐
vention and Insurance Association and to the authority responsible for occupational safety. In
the event of public use, the complete laser equipment must be approved by an expert (e. g.
the Technical Control Board TÜV) prior to commissioning.
Laser safety basics
Safety instructions
showlaser
12

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
13

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
DANGER!
Laser radiation – avoid exposure to beam
The device contains a class-3B laser, classified according to EN 60825-1:2015. Do
not look into the laser beam. The laser beam can injure your eyes when you
directly look into it. Do not expose yourself to the laser beam. The laser beam can
cause skin burns.
In this context take extreme care when using converging optical instruments.
Safety instructions
showlaser
14

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Laser radiation – risk of fire
Keep the area exposed to laser radiation free from flammable substances.
Safety instructions
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
15

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
showlaser
16

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
Safety instructions
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
17

3 Features
The showlaser is specially suited for discos, clubs, bars, stages, etc. Its control via the DMX
interface allows smooth integration into light shows.
Special features of this device:
nControl via DMX (9 channels) and buttons plus display on the unit itself.
nBuilt-in automatic show programmes
nSound control
nMaster/slave mode
n32 different patterns
nTwo laser diodes with the corresponding mixed colour (150 RGY: red, green, yellow;
250 RVP: red, violet, pink; 200 GVC: green, violet, cyan)
Features
showlaser
18

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Installation
DJ Lase Performance 150 RGY / 250 RVP / 200 GVC
19

Connect the external safety switch (optional, not included in scope of delivery) to the connec‐
tion socket provided on the unit. If you press the switch, the laser beam will be switched off
immediately.
Follow the switch manufacturer's safety instructions and the guidelines for intended use.
Safety switch (emergency stop)
Installation
showlaser
20