Thomasville Nature's Retreat 12260-002 User manual

Page 1 of 2
Assembly Instructions Nature’s Retreat™Side Table Model # 12260-002/012
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts that may have
come loose inside the carton during shipment. Please read all instructions carefully before starting the assembly process.
CAUTION: Some items and/or the components are cumbersome and heavy.Therefore, the assistance of one or more people
is recommended in order to prevent personal injury and insure that the item and/or its components are not damaged during
the assembly process. Perform all assembly steps on a flat, soft, non-abrasive surface. Do not overtighten the screws or bolts.
Parts & Hardware List
No. Diagram, Description, & Size (mm) Qty No. Diagram, Description, & Size (mm) Qty
Side Frame
465 x 392 x 34
Top Assembly
406 x 406 x 54
Bottom Shelf Assembly
378 x 324 x 34
HW-ST-01-042
F-Screw 7x60
HW-ST-18-001
Allen key 4x98
HW-MM-06-075
Adjustable Leveling Glide Ø22x27
Espresso Touch-up Oil
1. Place the top assembly (B) upside down
and loosely install both side frames (A)
using the F-screws (D) as indicated in
Figure I. DO NOT completely tighten
the F-screws at this time.
Note: A bottle of Espresso Touch-up Oil (G) was provided for
your convenience. Do NOT discard. Use when necessary to
touch-up and repair minor nicks, scratches and/or abrasions.
Figure I
NR_AI SideTable_eng 8/22/07 12:16 AM Page 1

Page 2 of 2
Assembly Instructions Nature’s Retreat™Side Table Model # 12260-002/012
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
2. Install the bottom shelf assembly (C) between the two side
frames (A) using the F-screws (D) as indicated in Figure 2.
Tighten all F-screws (D) using the Allen key (E).
3. Screw the adjustable leveling glides (F) into the
bottom of each leg. Carefully turn the table
over into the upright position. See Figure 3.
Figure 2
Figure 3
NR_AI SideTable_eng 8/22/07 12:16 AM Page 2