Thomasville Summer Silhouette 12265-002/012 User manual

Page 1 of 2
Assembly Instructions Summer Silhouette
TM
Side Table Model # 12265-002/012
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts that may have come
loose inside the carton during shipment. Please read all instructions carefully before starting the assembly process.
CAUTION: Some items and/or the components are cumbersome and heavy. Therefore, the assistance of one or more people
is recommended in order to prevent personal injury and insure that the item and/or its components are not damaged during the
assembly process. Perform all assembly steps on a flat, soft, non-abrasive surface to avoid scratching the finish. Do not over-
tighten the screws or bolts.
Hardware & Parts List
No. Description Picture Qty
A1 Glass Top (Packed inside of table rim for
shipping)
1
A2 Table Rim
1
B Table Legs 4
C Screws 1/4”*20 16
D Washers
φ6.5*1.0 16
E Screw Covers 1/4”
16
F Hex Key
1
G Touch-up Paint
1
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !

Page 2 of 2
Assembly Instructions Summer Silhouette
TM
Side Table Model # 12265-002/012
1. Carefully remove the glass top (A1) from the tabletop. Place the table
rim (A2) upside down on a flat soft, non-abrasive surface. Align the holes
of the table legs (B) with the holes in the table rim. Attach each leg (B)
using the screws (C) and washers (D) as indicated. When attaching each
leg, insert and start all four screws before completely tightening the
screws. Once all four screws are inserted, tighten each screw using the
hex key (F). After checking to make sure all screws are securely tightened,
install the screw cover caps (E). See Figure 1.
Figure 1
2. Carefully turn the table over into the upright position and place the glass top (A1) into the
recessed opening in the table rim. See Figure 2.
CAUTION
As a safety precaution, tempered glass was used for the top.
Handle and use the glass top with care.
Do not put hot items directly on the glass top.
Note: Please keep the touch-up paint (G) for future use on your table if needed.
Figure 2
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !